User's Manual

ManualsBrandsMandolyn Electronic Technology ManualsElectronicsRemote transmitter for temperature measurement

Operation of Thermo Station

The LCD display of the Thermo Station can be divided into 3 sections: Upper and Lower thermo display and clock display

area.

The various functions are arranged in a circular pattern as shown below and are displayed on the bottom display area:

Clock Mode —> Alarm Mode —> Countdown Timer Mode —> Date Mode —> Clock Mode…

To shift from one mode to the other, press the MODE key. The display will return to Clock Mode automatically if no key is

pressed for 1 minute.

For the Temperature / Humidity Display, they are displayed on the top 2 sections.

Functions of Thermo Station

Setting the Clock

1. To enter Clock-setting mode, press SET key in the Clock Mode and the Hour field will flash as in Figure 1.

2. Press the ⇑(MODE) key or the ⇓(CHANNEL) key to increase or decrease its value.

3. To confirm the entry and move to the next field, press the SET key and the next field will be flashing.

4. Repeat Step (2) and Step (3) until all the data have been set.

5. For the value of Second, it can be set either to ”00” of the present minute (⇓), or ”00” of the next minute (⇑)

6. To switch between 12- and 24-Hour display format, press the ST/SP key in the Clock-setting mode.

7. After all data are set, the display will return to the Clock Mode.

Setting the Alarm

1. To enter Alarm-setting mode, press the SET key in the Alarm mode and the Hour field will flash as in Figure 2.

2. Press the ⇑(MODE) key or the ⇓(CHANNEL) key to increase or decrease its value.

3. To confirm the entry and move to the next field, press the SET key and the next field will be flashing.

4. Repeat Step (2) and Step (3) until hour and minute have been set.

5. To confirm the entry, press the SET key again.

6. To activate the alarm, press the ST/SP key in the Alarm or Alarm-setting mode. A beep will sound and ”ON” will

be displayed indicating that the alarm is on as in Figure 3. To de-activate the alarm, press the ST/SP key again.

7. Alarm will sound for 1 minute when alarm time has arrived. Press any key to stop the alarm (Snooze Function: If

the SNOOZE key is pressed, the alarm sound will stop and re-generate after every 5 minutes until other key is

pressed to stop the alarm sound).

Setting the Kitchen Countdown Timer

1. To enter Kitchen Countdown Timer setting mode, press the SET key in the Kitchen Timer mode and the Hour

field will flash as in Figure 4.

2. Press the ⇑(MODE) key or the ⇓(CHANNEL) key to increase or decrease its value.

3. To confirm the entry and move to the next field, press the SET key and the next field will be flashing.

Summary of content (4 pages)

PAGE 1
Operation of Thermo Station The LCD display of the Thermo Station can be divided into 3 sections: Upper and Lower thermo display and clock display area. The various functions are arranged in a circular pattern as shown below and are displayed on the bottom display area: Clock Mode —> Alarm Mode —> Countdown Timer Mode —> Date Mode —> Clock Mode… To shift from one mode to the other, press the MODE key. The display will return to Clock Mode automatically if no key is pressed for 1 minute.
PAGE 2
4. Repeat Step (2) and Step (3) until all the data have been set. 5. 6. The range of countdown display is from 1 second up to 23 hours 59 minutes and 59 seconds. To start the countdown, press the ST/SP key in the Kitchen Countdown Timer mode or its setting mode. A beep sound indicates that the countdown has started. Press the ST/SP key during countdown will pause the process. To resume countdown, press the ST/SP key again. Countdown will continue even when you exit the Kitchen Countdown Timer mode.
PAGE 3
5. 6. 7. 8. 9. Use the SET button to select different Channel Number (1 – 4) for each of your transmitter. The Channel Number will be confirmed if no key is pressed for 10 seconds. The current temperature will start to flash. Use the SET button to change between °C to °F if desired. This selection will not affect the unit displayed on the receiver. Setting mode will end after no key is pressed for 10 seconds.
PAGE 4
Temperature Alarm Function 1. To use the temperature alarm function, press the SNOOZE key until Temperature Alarm mode is displayed. (Figure xx). The top section indicates the set temperature and the middle section indicates the active period (16 hours or 24 hours). 2. To set the temperature alarm, press SET key while the display is in Temperature Alarm Display mode. The Alarm Temperature will start to flash. 3. Press the ⇑(MODE) key or the ⇓(CHANNEL) key to increase or decrease the set temperature.