User's Manual

ManualsBrandsMandolyn Electronic Technology ManualsElectronicsWeather Station Receiver

1 of 6

OWNERS MANUAL

FEATURES

Base Station: WS1200

z With 4R size photo frame

z Perpetual calendar

z Clock (Hour, Minute display)

z User selectable 12 or 24 hour display

z Local & Remote temperature display in

selectable °C or °F display format

z Temperature trend indicator

z Remote temperature display

--Able to receive and display signals of

remote temperature up to 4 different

transmitters

z Low-Battery indicator

z Maximum and minimum temperature

memory recall for local and remote

temperature

Remote Transmitter: WT440

z Compact size with Wall-mount holder

z Drip-proof design

z Transmit temperature data to main unit

--Green LED for the transmission indication.

z Transmission Range: approx. 40 meters in

open area

Stand

Outdoor Channel

Indicator

Indoor & Outdoo

Temperature Display Area

(With Trend Display)

Trend Symbol

Clock Display

rea

(Selectable 12 hours

or 24 hours display)

Perpetual Calenda

Display Area

(Year, Month, Day)

Photo Frame

Summary of content (6 pages)

PAGE 1
OWNERS MANUAL FEATURES Base Station: WS1200 z With 4R size photo frame z Perpetual calendar z Clock (Hour, Minute display) z User selectable 12 or 24 hour display z Local & Remote temperature display in Photo Frame selectable °C or °F display format z Temperature trend indicator z Remote temperature display --Able to receive and display signals of Stand remote temperature up to 4 different transmitters z Low-Battery indicator z Maximum and minimum temperature memory recall for local and r
PAGE 2
KNOW YOUR PRODUCT Function setting of WS1200: 1. °C / °F Change between °C or °F display format 5 2. MAX / + Increase the value during setting status / Show maximum temperature detected by local and remote sensors 1 2 4 3 3. MODE Scroll between clock, date setting mode 12/24 hr clock display selection Function setting of remote transmitter WT490: 4. MIN / Decrement the value during setting status / Show minimum temperature detected by local and remote sensors 6 7 5.
PAGE 3
GETTING STARTED Warning: Any changes or modifications made to this equipment not expressly approved by Mandolyn Electronic Ltd. may void the FCC authorization to operate this equipment. USING THE THERMOMETER FOR THE FIRST TIME ! Set up the transmitter for use first so that the base station can receive a signal immediately. Step 1: Using the transmitter for the first time 1. Open the battery compartment of the transmitter. 2. Insert 2xAA batteries included with purchase.
PAGE 4
SYNCHRONIZE Automatic Learn Function: 1. After inserting the batteries, the indoor temperature is displayed.The base station now tries to pick up signals from sensors for 3 minutes.If no signal is detected, bars are shown on the display. 2. As soon as the base station has detected a sensor signal, the display then shows the temperature value received from the sensor. 3. If reception is lost before the time can be set, then place the base station, which has better reception, such as, near a window.
PAGE 5
TEMPERATURE DISPLAY Check Local Temperature: 1. After insert batteries, indoor temperature will display Check Remote Temperature: 2. Press “CHANNEL” to toggle between channel 1,2,3 and 4 o C or oF Temperature Display: 3. Toggle between oC and oF by pressing “C / F” Max and Min Temperature Display: 4. Press “MAX / + “ to display maximum temperature 5.
PAGE 6
Base Station: WS1200 Battery Type: 2 x 1.5V AA batteries Operation Temperature Range: -5 oC~+50 oC Remote Transmitter: WT440 Battery Type: 2 x 1.5V AA batteries Operation Temperature Range: -30 oC~+60 oC Transmission Frequency: 433.92MHz Transmission Range: Up to 40 meters in open area FCC Statement The statement required by 15.105 is as follows: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.