KOPPLA 1
CONTENTS START HERE! 4 Insert the batteries in the remote control 4 Set the time and date Program the receiver DIRECT CONTROL 4 7 9 Choose channels 9 Functions 10 PROGRAMMING 12 Grouping 12 Choose group 13 Random on/off 13 Delay shut off 14 Timer programming 15 Programming example 18 Deactivate Timer program 21 Activate Timer program OTHER FUNCTIONS 21 21 Key sound and background lighting on/off 21 Key lock on 22 Key lock off 22 Language selection 23 RECEIVER 24 Dimmer re
TECHNICAL DATA 27 Remote control 27 Dimmer receiver 27 On/off receiver 27 REMEMBER 28 Installing the wall bracket for the remote control LCD DISPLAY 29 30 Remote control (fig 7) 30 Dimmer receiver (fig 8) 30 On/off receiver (fig 9) 30 COMPONENT LAYOUT 32 Remote control (fig 1) 32 Dimmer receiver (fig 2) 32 On/off receiver (fig 3) 32 3
START HERE! Insert the batteries in the remote control 1. Open the battery cover on the back. 2. Insert three AAA/LR03/AM4/ batteries 3. Close the battery cover. Set the time and date 1. Press [FUNCTION] 2.
3. Select time format. You can choose between 12 and 24 hour display. To change between 12 or 24 hour display, press [UP] Press [SET] to continue. 3.1 24 hour display. Enter the time, for example, 15.00. Press [1],[5],[0],[0] 3.2 12 hour display. Enter the time, for example, 3.00 AM. Press [0],[3],[0],[0], [DOWN] For 3.
4. State the day of the week. Press [UP] or [DOWN] to change the day of the week. Sunday (SUN) Monday (MON) Tuesday (TUE) Wednesday (WED) Thursday (THU) Friday (FRI) Monday- Friday (M-F) Saturday- Sunday (S-S) Complete week (ALL) 5. Press [SET] to continue.
Program the receiver The receivers must be programmed to recognise signals from the remote control. Each receiver corresponds to a channel on the remote control. Up to 10 channels/receiver can be programmed. 1. Place the receiver in the wall socket. 2. Press [FUNCTION] on the remote control.
3. Press [6] 4. Select channel (1-10), for example, 1. Press [1] 5. Press down one of the buttons on the receiver within 10 seconds. The red lamp on the receiver starts to flash to acknowledge the receiver has received the signal from the remote control. 6. Press [FUNCTION] on the remote control. If you have several receivers, repeat steps 1-6 choosing other channels.
DIRECT CONTROL Choose channels 1. To choose one or more channels (receiver) press [CH] 2. Choose, for example, receiver 2 by pressing [2]. The chosen channels are shown on the top row of the remote control display. 3. If you want to control several receivers at the same time, for example, receivers 1 and 2, press [CH] followed by [1] and [2] 4. To clear the chosen channels press [CH] again. 5. To choose all 10 channels press [CH] once again.
Functions 1. Switching on and off. 1.1 Choose the channel/s. 1.2 Press [ON] to switch on. 1.3 Press [OFF] to switch off. 2. Dimmer. Increase or decrease the brightness. (Only applies to receivers with the dimmer function.) NOTE: Energy saving bulbs do not work. 2.1 Choose the channel/s. 2.2 Press [UP] to increase the brightness. 2.3 Press [DOWN] to reduce the brightness. 3 Set the brightness. 3.1 Choose the channel/s. 3.2 Press [LEV] 3.3 Choose brightness 1-9, for example 5.
4. Gradual on/off or instant on/off. 4.1 Press [FUNCTION] followed by [1] to switch between gradual on/off and instant on/off. In gradual mode the lights are switched on and off with increasing respective decreasing brightness. In instant mode the lights are switched on and off instantly.
PROGRAMMING Grouping Instead of choosing channels one by one you can group and name different channels, e.g. living-room, bedroom, hall, etc. 1. Select group number, for example, 1, by pressing [GRP] followed by [1] Scroll between the groups by pressing [UP] or [DOWN] 2. Press [SET] to state the group names. Use the number keys to enter letters and [UP] and [DOWN] to move the cursor. A maximum of 10 characters can be used. 3. Press [SET] to confirm the name. 4.
5. Press [SET] to save the group. You can edit the groups by carrying out steps 1-5 to write over or change them. Choose group 1. Select group number, for example, 1, by pressing [GRP] followed by [1] Scroll between the groups using [UP] or [DOWN] Random on/off This function switches chosen lights on and off at random time intervals. 1. Select the channel/s or group. 2. Press [FUNCTION] followed by [3].
The function is deactivated by new commands to the chosen channels using the remote control, pressing keys on the receiver or if the receiver is removed from the wall socket. Delay shut off The function switches off the chosen lights after a predefined time. You set directly by channel/s or by group. Channel/s: 1. Press [CH] followed by the number. 2. Press [FUNCTION] followed by [2] 3. State the length of the delay you would like, for example after 15 minutes.
2. Press [FUNCTION] twice followed by [2] 3. State the length of the delay you would like, for example after 15 minutes. The time can be stated between 1-99 minutes. NOTE! Pressing the key again deactivates the function. Timer programming 1. Press [PROG] 2. Select the program number (01-16). Press [0],[1] for program 1. The display shows EMPTY if the chosen program has not previously been programmed. If it has been preprogrammed the program settings are shown.
3. Press [SET] to continue. 4. State the time when you would like the command to be executed, for example, 6 PM. To state AM/PM press [UP] or [DOWN] 5. Select the day by pressing [UP] or [DOWN] Sunday (SUN) Monday (MON) Tuesday (TUE) Wednesday (WED) Thursday (THU) Friday (FRI) Monday- Friday (M-F) Saturday- Sunday (S-S) Complete week (ALL) 6. Press [SET] to continue. 7. Choose the channel/s. For example, press [2] for channel 2. 8. Press [SET] to continue.
9. Select the command On = Press [ON] Random on/off = Press [ON] once again. Off = press [OFF] Preset brightness = Press [LEV] followed by a number for the level (1-9). 10. Press [SET] to save the program. 11.
Programming example The example shows the following: Switch on (instant) a light connected to receiver/ channel 1 at 18.00 on Saturdays and Sun-days. Switch off the same light at clock 23.00 on Saturdays and Sundays. Each ACTION requires a program, i.e. this example will need two programs saved as PROG 01 and PROG 02.
[1] [SET] [ON] [SET] Switch off: [PROG] [0],[2] [SET] [2],[3],[0],[0] 19
[DOWN] X times [SET] [1] [SET] [OFF] [SET] 20
Deactivate Timer program 1. Choose the program. Press [PROG] followed by the program number. 2. Press [OFF] Activate Timer program 1. Choose the program. Press [PROG] followed by the program number. 2. Press [ON] OTHER FUNCTIONS Key sound and background lighting on/off 1. Press [FUNCTION] followed by [5] 2. Scroll with [ON] or [OFF] to adjust the key sound. ON= Key sound on confirmation. OFF= Key sound switched off. CLICK= Key sound with key use.
3. Press [SET] to adjust background lighting. 4. Scroll with [ON] or [OFF] to switch the background lighting on or off. 5. Press [SET] Key lock 1. To use the key lock function, enter a 3-digit code by first pressing [FUNCTION] followed by [7] 2. Enter a 3-digit code. 3. Press [FUNCTION] twice. Key lock on 1. Press and hold down [FUNCTION] for 3 seconds. Key lock off 1. Enter your 3-digit code. If you forget your code you can deactivate the key lock by taking out and reinserting the batteries.
Language selection 1. The transmitter offers three language options to choose between. Press [FUNCTION] followed by [0] 2. Press [UP] or [DOWN] to choose a language. 3. Press [SET] Changing the system code with interference The transmitter automatically sets a system code when you insert the batteries. If your neighbour also owns a KOPPLA remote control and by chance has the same system code you may experience operating disturbances. You can manually set a system code (01-16). Do this: 1.
RECEIVER Dimmer receiver (fig 2) The receiver is only intended for lighting. Installation: 1. Insert the receiver in the outlet socket. The Main lamp, green lamp, comes on when the receiver is connected to the mains supply. 2. Connect the lamp/lamps (max combined output 300W) to the receiver. Manual on/off: 1. Press [ON/OFF] to switch the lamp on or off. The output lamp, the red, comes on when the receiver powers the connected lamp. Manual brightness: 1. Press [UP] to increase the brightness.
The -symbol is shown on the receiver’s LCD display. Press [ON/ OFF] on the receiver for 3 seconds to allow the reception of signals again. Resetting: If commands are not shown on the receiver’s LCD display, strange characters are displayed or it does not react when keys are pressed the receiver needs to be reset. 1. Press in ”the small” [R] key on the receiver. The receiver shuts off and resets random on/off, deactivate remote control and the set brightness. On/off receiver (fig 3) Installation 1.
when the receiver powers a connected lamp. Deactivate reception: 1. If do not want the receiver to receive signals from the remote control, press and hold down the [ON/OFF] for 3 seconds. The -symbol is shown on the receiver’s LCD display. Press [ON/ OFF] for 3 seconds to allow the receiver to receive signals from the remote control.
TECHNICAL DATA Remote control Range: 25 m clear view. Walls and other objects limit the range. Batteries: Three AAA/LR03/AM4/ Micro. Frequency: 433MHz. Dimmer receiver Mains voltage: 120VAC, 60Hz Load: 20- 200W Fuse: 1.6A NOTE: Only incandescent lamps (120V), halogen lamps (120V) and halogen lamps with a transformer (120V) may be connected to the dimmer receiver.
REMEMBER never overload the receiver. never interconnect the receivers. that the receivers are for indoor use (0°-35°C) and must not be used outdoors. never open the receiver or remote control. never expose the receiver or remote control to strong cleaning agents and moisture. never poke objects in the outlet sockets. to only clean the remote control with a damp cloth. to replace the batteries in the remote control when the battery indicator shows they are empty and the display is unclear.
Installing the wall bracket for the remote control 1 2 29
LCD DISPLAY Remote control (fig 7) 1. Channels 2. Text 3. Off symbol 4. Clock 5. Gradual on/off symbol 6. Instant on/off symbol 7. Signal symbol 8. Battery capacity symbol 9. On symbol 10. Brightness Dimmer receiver (fig 8) 1. On symbol 2. Brightness 3. Random on/off 4. Reception symbol 5. Channel number On/off receiver (fig 9) 1. On symbol 2. Random on/off 3. Reception symbol 4.
1 2 3 10 9 4 5 6 7 8 Fig 7 1 5 2 3 4 Fig 8 1 4 2 3 31 Fig 9
COMPONENT LAYOUT Remote control (fig 1) 1. LCD display 2. (ON) 3. (OFF) 4. Number/letter keys 5. Channel (CH) 6. Group (GRP) 7. Brighter/Menu selection (UP) 8. Darker/Menu selection (DOWN) 9. (SET) 10. Programming (PROG) 11. Brightness level (LEV) 12. Function Dimmer receiver (fig 2) 1. LCD display 2. (RESET) 3. Brighter (UP) 4. On/Off On/off receiver (fig 3) 1. LCD display. 2. (RESET) 3. (ON/OFF) 4. Mains connection (MAIN) 5.
1 2 3 7 8 9 10 11 12 4 5 6 Fig 1 33
1 2 3 4 5 6 7 Fig 2 1 2 3 4 5 Fig 3 34
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
