Advanced Smart Cruise Control System 1
I. System Information 1. Introduction • The ASCC system operates the convenience feature automatically maintaining the distance by measuring the distance and speed of the lead vehicle with the radar in front of the car. Also, if the lead vehicle is stopped along the rear of the lead vehicle stops, and re-start feature provides at the start with Stop & Go function. 2.
II. Specific System Structure 1. SCC 1) Function • Monitoring front road condition(sensing function) • Driver riding/getting off and monitoring car condition(ECU function) • Calculating and output of the Required acceleration(ECU function) 2. Switch 1) Function • ACSS system On/Off • Target speed control • Target distance control • Operation ON/OFF • ASCC-CC switching operation 3.
. Instruction of the ASCC control using switch 1) 2) ON/OFF Main Switch • ON/OFF function • In case of the Standby mode, “CRUISE” Ramp turn ON 『SET/– 』 Switch • • 3) At the Stand by mode, Press SET Switch and then Control start. » The target speed set 30 km/h when the car speed is from 0 to 30 km/h. » When the car speed is over 30 km/h, the target speed is the same as current speed. If the SET switch is pressed under control, the target speed will be decreased.
Notice: This Device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
