Fastener Tools & Accessories 105
malco tool book | better ideas for the real world. Mighty-Right Right Angle Impact Driver ™ New! in 2011 Smallest, lightest, most maneuverable impact driver on earth! Use the Mighty-Right™ to drive or remove sheet metal screws in tight spaces and blind spots encountered when installing metal duct work, including access into small diffuse boxes and equipment enclosures. A unique LED light integrated into bit area sight line features a separate on / off switch. No.
malco tool book | www.malcotools.com 2-in-1 Hand Riveter One hand operation with normal squeezing action provides enough pulling power to set all popular size rivets (see specifications column below). 2-in-1 adjustment features a single long stroke for most hand riveting applications and a short “ratchet action” power stroke for setting larger diameter rivets. Outside jaw-grip adjustment wheel opens and closes jaws with fingertip ease to fit any size mandrel and to obtain maximum stroke efficiency.
malco tool book | better ideas for the real world. Jobber Drill Sets Orifice Drill Set FJ13S 13 Piece Set FJ60S FJ6180 60 Piece Wire GaugeSet 20 Piece Orifice Drill Set includes: PV1 Pin Vise PV1 Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 60 to 97. High Speed Jobber Length Drills Sheet Metal Drills General purpose drills. 118° conventional point angle allows deep drilling in a variety of materials including metal.
malco tool book | www.malcotools.com Step Drills A unique double flute design assures the penetration of soft or thin materials at the proper speed. Drill hole sizes from 1/8” to 1” in sheet metal without burring or deforming stock or threading drill bit. Malco Step Drills actually deburr as they drill. Perfect for use as a “hole-opening” reamer. They can also be used for making round holes from slots or intersecting holes. Made of industrial grade high speed steel.
malco tool book | better ideas for the real world. Regular and Gripped Screwdrivers Regular Gripped Screwdrivers Cushioned Gripped Screwdrivers Shallow fluted handles with large end bearing surface provide a sure, comfortable grip for maximum torque. The same great features as all Malco drivers plus a large, comfortable barrel shaped cushion grip. Easy to Spot Orange Handle Large comfortable barrel shaped custom grip. Precision Ground tip for perfect screw fit.
malco tool book | www.malcotools.com Regular / Gripped and Reversible Screwdrivers 7 Piece Combination Screwdriver Set Phillips Head High Polish Finish Gripped P42C Most popular sizes P33 P33C of Keystone, Cabinet Style and Phillips screwdrivers packaged in a vinyl see-thru pouch. SK2C 6 in 1 Reversible Driver 2 combination bits and 2 hex barrel openings drive 6 different head styles / sizes. Bit shank firmly locks into handle barrel. Driver bits are individually protected with black oxide.
malco tool book | better ideas for the real world. Magnetic Screwdrivers Magnetized tips hold screws for easier installation in tight quarters when fastening inside profiles, around existing installations or reaching into cabinet enclosures. Hardened chrome-vanadium steel blades offer maximum torque capacity. Cushioned handles offer a firm, ergonomically correct grip. And a handy hex-shaped base on selected round shank blades can be used with a wrench for added leverage.
malco tool book | www.malcotools.com Connectivity re-defigned Introducing New and Improved Malco Nut Drivers and Hex Drivers with CONNEXT™ Quick-Change Handles! CONNEXT™ Handles from Malco have been combined with precision-fit and hardened Malco Chuck Driver components to offer the ultimate in Nut Driver and Hex Driver durability and versatility. All components, including Magnetic Hex Chuck Drivers and all-new Hollow Hex Chuck Drivers and CONNEXT™ Handles are also available separately.
malco tool book | better ideas for the real world. Quick-Change Handles come in full grip and stubby sizes and are equipped with a quick-connect holder mechanism to accept any 1/4-inch shank chuck driver. Hollow Hex Chuck Drivers with 1/4-inch power insert shanks, are available in 3-inch and big 6-inch lengths. And all Malco Hex Chuck drivers are now COLOR CODED for easy size identification whether installed on a power drill or used with a CONNEXT™ Handle.
malco tool book | www.malcotools.com Hollow Hex Chuck Drivers 1-1/2” (38 mm) Hollow Nose Use with all Over All corded or cordless drills & Connext handles! 3” (76 mm) Hollow Nose Over All Magnetic Hex Chuck Drivers Connext1 CONNEXT™ Quick Change Handles Stubby Chuck Drivers Standard Chuck Drivers Available in Tubs and Boxes 1/4” Hex Shank Phillips Power Bits and Standard Bits Long Chuck Drivers Magnetic Hex Drivers 1/4 and 5/16 sizes also available in bulk tubs of 100.
malco tool book | better ideas for the real world. Cushioned-Gripped “T” Handle Hex Key Sets Extra long, hardened and tempered alloy steel “T” Handle hex keys provide extra reach and extra leverage. Plus, vinyl cushion grips and comfort provide added torque. • Big 6” and 9” sets consist of 8 sizes: 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32” and 1/4”. • Kits are packaged in reusable, clear vinyl pouches with velcro-tab closures.
malco tool book | www.malcotools.com Folding Hex Key Sets Catalog Number Description Handle Length Number of Keys W19 Small Pocket 3-5/8” 9 W29 Deluxe Pocket 4-1/4” 9 W45 Large Sizes 5-1/4” 5 Produced from tough alloy steel W48 Extra Long 5-1/4” 8 W29 Hex Sizes - Width Across Flats .
