Warranty

Safety / Warranty
Safety Precautions
Read, understand, and follow all instructions and warnings in tool or charger
instruction manuals as well as those provided with recommended accessories.
Keep guards in place and in working order.
Use recommended accessories only.
Check damages parts. (Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function). A guard or other part that is damaged
should be properly repaired or replaced by an authorized service center.
Keep work area clean. Cluttered areas and benches invite injuries.
Consider work area environment. Do not use power tools in damp or wet
locations. Keep work area well lit. Do not expose power tools to rain. Do not
use tools or chargers in presence of flammable liquids or gases.
Keep children away. All visitors should be kept away from work area.
Store idle tools. When not in use, tools should be stored high or locked up out of reach of children.
Use the right tool. Do not force a small tool or attachment to do the job of a heavy duty
tool. Do not use tool or accessories for purpose not intended. Only use proper, recommended
accessories for the tool being used. Only use genuine Makita batteries and chargers.
Dress properly. Do not wear loose clothing or jewelry. They can be caught
in moving parts. Wear protective hair covering to contain long hair.
Use safety glasses whenever operating any tool. Makita safety
goggle and glasses are available (part no. 191686-2, 191684-A, and
191685-A). Also use face or dust mask if operation is dusty.
Don’t abuse cord. Never carry tool by cord or yank it to disconnect from receptacle.
Secure work. Use clamps or a vise to hold workpiece. It can be
safer and it frees both hands to operate and control tool.
Maintain tools with care. Keep tools sharp and clean for best and safest
performance. Follow instructions for lubrication and changing accessories.
Unplug tools when not in use, before servicing, and when changing accessories.
Remove adjusting keys and wrenches. Form a habit of checking to see that keys
and adjusting wrenches are removed from tool before turning it on.
Avoid unintentional starting. Don’t carry plugged-in tool with
finger on switch. Be sure switch is OFF when plugging in.
Outdoor use extension cords. When tool is used outdoors, use only
extension cords intended for use outdoors and so marked.
Guard against electric shock. Prevent body contact with grounded surfaces.
For example: pipes, radiators, ranges, and refrigerator enclosures.
Replacement parts. When servicing, use only genuine Makita replacement parts.
Never leave tool running unattended. Turn power off.
Don’t leave tool until it comes to a complete stop.
Makita
®
U.S.A., Inc., reserves the right to make changes or improvements on its products without incurring an additional obligation including any obligation to make corresponding changes or improvements to
products previously manufactured or sold. Makita
®
reserves the right to discontinue products at any time without notice. All illustrations and photographs displayed in this catalog are the property of Makita
®
U.S.A., Inc., and shall not be duplicated or reproduced without the express written consent of Makita
®
U.S.A., Inc.
Limited Warranty
1-800-4MAKITA
1-800-462-5482
makitatools.com
Disclaimer
Contact Makita
®
Every Makita
®
product is thoroughly inspected and tested before leaving the factory. If you are
not satisfied with any Makita product within 30 days of purchase, return it freight prepaid, to one
of Makita’s Factory or Authorized Service Centers and Makita will provide, at Makita’s option, a
replacement or refund. This guarantee does not apply to Makita
®
Accessories and/or wearable items
such as bits, blades or cutters.
Every Makita
®
product is warranted to be free of defects from workmanship and materials for the
period of ONE YEAR from the date of original purchase. Certain products referenced below have
longer warranties. Should any trouble develop during the one-year period, return the COMPLETE
product, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection
shows the trouble is caused by defective workmanship or material, Makita will repair (or at our
option, replace) without charge.
iN NO EVENT SHALL MAKITA BE LIABLE FOR (A) ANY INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES ARISING FROM THE SALE OR USE OF THE PRODUCTS SOLD UNDER THESE WARRANTIES, OR (B) ANY
AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID TO MAKITA FOR THE PRODUCTS SOLD HEREUNDER. THIS
LIMITATION APPLIES BOTH DURING AND AFTER THE TERMS OF THE WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF
“MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC PURPOSE” AFTER THE EXPIRATION OF ANY EXPRESS
WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the
above limitation may not apply to you.
Every Makita® Pneumatic Nailer and Lithium-Ion Tool, Battery and Charger is warranted to be
free of defects from workmanship and materials for the period of THREE YEARS from the date of
original purchase. Should any trouble develop during the three-year period, return the COMPLETE
Lithium-Ion Tool, Battery, Charger or Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or
Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace) without charge.
These warranties do not apply to Makita Accessories or where:
• Repairs have been made or attempted by others.
• Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers,
normal wear parts include the following and are not covered under this warranty: piston/driver
assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.
• The tool has been abused, misused, improperly maintained or operated.
With regard to Pneumatic Nailers, improper operation includes the failure to use clean,
dry regulated compressed air and/or air pressures exceeding the maximum indicated on the
nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a
non-genuine or “knock-off” battery on a Lithium-Ion Tool or Charger. With regard to Laser
Instruments, abuse includes liquid damage or physical damage caused by impact.
• Alterations have been made to the tool.
THD-0916 MA-6784-16