Overview 2 Technical data 3 Instrument Set-up 5 Operations 8 How to use the adapters and wall mount 11 Message Codes 13 Accuracy Check 14 Care 16 Safety instructions 17 Optional accessories 22 Makita SK105D/SK105GD 1
Overview Ov e rv ie w The Makita SK105D/SK105GD is a self-levelling cross-line laser. It is a reliable precision laser for any kind of tasks like levelling, plumbing, transfering and setting out right angles. It supports you on job side with two crossing vertical and horizontal lines.
Technical data T e c h n ic a ld a ta Description Beam direction/fan angle Range* Range* with receiver Levelling accuracy Horizontal/Vertical line accuracy SK105D Self-levelling range Self-levelling time Out-of-level warning Levelling system Laser type ±4° <3s Yes - blink lines every 5 s Automatic pendulum lockable 635 ± 5 nm, Class 2 (acc. IEC 60825-1) 525 ± 5 nm, Class 2 (acc.
Technical data Please note the following: l l l l Due to our continuing program of research and development, the specifications herein are subject to change without notice. Specifications may differ from country to country. The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTAProcedure 01/2014, are shown in the table.
Instrument Set-up In s tru me n tS e t-u p Introduction The safety instructions (see Safety Instructions) and the user manual should be read through carefully before the product is used for the first time. Levelling lock Levelling unlocked In the unlocked position the instrument automatically levels itself within the specified inclination range. (See Technical data) Levelling locked Turn the levelling lock in order to transport or tilt the instrument beyond the self-levelling range.
Instrument Set-up Laser receiver Li-Ion battery To be able to detect the laser lines over long distances or in unfavourable lighting conditions, a laser receiver can be used. Installing or removing battery cartridge We recommend the Makita LDX1 laser receiver. CAUTION Always switch off the tool before installing or removing of the battery cartridge. CAUTION Hold the tool and the battery cartridge firmly when installing or removing battery cartridge.
Instrument Set-up Using the USB adapter (optional) Makita CXT batteries Indicating the remaining battery capacity Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Only for battery cartridges with the indicator Press the check button (2) on the battery cartridge to indicate the remaining battery capacity.
Operations Op e ra tio n s Switching ON/Set key Brightness reduction If the instrument is locked press laser key 3 times to switch off: Makita SK105D/SK105GD 8
Operations Functions with unlocked levelling Vertical lines and horizontal lines Makita SK105D/SK105GD Horizontal line Vertical line 9
Operations Functions with locked levelling Horizontal line Makita SK105D/SK105GD Vertical line Horizontal line tilted 10
How to use the adapters and wall mount Ho wto u s e th e a d a p te rs a n d wa lmo u n t PRO L-adapter L-adapter Alignment of vertical laser lines (optional accessory) Turn the instrument 360° to adjust the vertical line. Put the instrument on PRO L-adapter and fix it by thread. Put the instrument on L-adapter and fix it by thread. L-adapter can not be used when battery cartridge BL1040B or BL1041B is inserted. Makita SK105D/SK105GD Turn the instrument 360° to adjust the vertical line.
How to use the adapters and wall mount Wall mount Different fixing applications (optional accessory) Turn the adjustment knob of the wall mount to loose and fix the slide for fine adjustment of the horizontal line to the desired reference level. The wall mount is a single item and will not be delivered with the L-adapter as shown above.
Message Codes Me s s a g e Co d e s Laser LED Cause Correction ON Lights green Normal - ON Blinks green Normal, laser set at reduced brightness OK - or press ON / Set key for 2 seconds to get strong laser beam ON Lights red Instrument is at low power Change power supply OFF Lights red 5 seconds then OFF Battery empty Change power supply OFF Blinks red Temperature alert Cool down - or heat up instrument Blinks Lights red Instrument is out of self-levelling and instrument is at low
Accuracy Check Ac c u ra c y Ch e c k Check the accuracy of your instrument regularly and particularly before important measuring tasks. Check Levelling lock before checking the accuracy. Levelling Checking the accuracy of the levelling Set the instrument on a tripod half-way between two walls (A+B) that are approx. 5 m apart. Place the lock switch in the "Unlocked" position (see Levelling lock). Direct the instrument at wall A and switch on the instrument.
Accuracy Check Vertical and horizontal line Checking the accuracy of the horizontal line Checking the accuracy of the vertical line Place the lock switch in the "Unlocked" position (see Levelling lock). Position the instrument approx. 5 m away from the wall. Direct the instrument at the wall and switch on. Activate the laser line and mark the intersection point of laser crosshairs on the wall. Swivel the instrument to the right and then to the left.
Care Ca re Never immerse the instrument in water. Wipe off dirt with a damp soft cloth. Never use aggressive cleaning agents or solvents. Treat the instrument with the same care that you would apply to binoculars or a camera. Dropping or violent shaking of the instrument may damage it. Check the instrument for any damage before using it. Check the levelling accuracy of the instrument regularly. To warranty the best precision and visibility please clean the optics of your instrument regularly.
Safety instructions Sa fe ty in s tru c tio n s The person responsible for the instrument must ensure that all users understand these directions and adhere to them. Areas of responsibility Responsibilities of the manufacturer of the original equipment: Permitted use 1. Projection of horizontal and vertical laser lines Prohibited use 1. Using the product without instruction 2.
Safety instructions Battery tool use and care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 2. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 3.
Safety instructions CAUTION Only use genuine Makita batteries. Use of nongenuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life: 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.
Safety instructions Electromagnetic Compatibility (EMC) WARNING The instrument conforms to the most stringent requirements of the relevant standards and regulations. However, the possibility of causing interference in other instruments cannot be totally excluded. FCC statement (applicable in U.S.) This equipment has been tested and found to comply with the limits for a Class B digital instrument, pursuant to part 15 of the FCC rules.
Safety instructions Laser classification WARNING Labelling Looking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Wavelength SK105D: 635 +/- 5 nm (red) / SK105GD: 525 +/- 5 nm (green) Maximum radiant output power for classification <1 mW Pulse duration The instrument produces visible laser beams, which are emitted from the instrument.
Optional accessories Op tio n a la c c e s s o rie s CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.