Rechargeable Flashlight MODEL ML900 INSTRUCTION MANUAL Power source Bulb Switch Makita battery cartridge 9000 (rechargeable Nc-cdl 9 6V 500 mA Rocker type ON-OFF Dimensions 0 84 m m x 273 m m (0 3-114" x 10 314") Net weight 260 g IO 6 Ibsl
Installing or removing battery cartridge NOTE : Before operation, charge the battery cartridge with Makita 9 . 6 V Fast charger. To insert the battery cartridge, pull out the set plate, align the tongue on the battery cartridge with the groove in the flashlight handle and slip i t into place. Snap the set plate back into place. Be sure to close the set plate fully before using the flashlight. Switch action To turn the flashlight on, press the "ON" side of the switch. Press the "OFF" side to turn it off.
MAINTENANCE CAUTION : Always be sure that the flashlight is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Replacing light bulb Turn the ring counterclockwise and remove the ring, reflector and bulb together. Pull the bulb holder out of the reflector. Pull the bulb out of the bulb holder after turning the bulb slightly clockwise. I To install a new bulb, follow the removal procedure in reverse. There are three notches in the bulb holder.
Cleaning Use a cloth dampened in a mild detergent to clean off the flashlight from time to time. Then wipe dry with a dry cloth. Benzine, thinner and other volatile agents will damage the plastic, so never use them. To maintain product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be perfomed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.