ENGLISH (Original instructions) INSTRUCTION MANUAL Blower M4000 013218 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model Capacities M4000 1.2 - 2.9 m3/min Max. air volume No load speed (min-1) 8,500 - 16,000 Overall length 427 mm Net weight 1.5 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
of a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 10. Use of power supply via a RCD with a rated residual current of 30 mA or less is always recommended. Personal safety 11. Stay alert, watch what you are doing and use common sense when operating a power tool.
starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 22. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Sash nozzle storage ASSEMBLY • 1 CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 1. Sash nozzle Installing or removing the nozzle 1. Nozzle 2. Pin 3. Blower outlet 4. Notch 3 2 1 013223 When not in use, the sash nozzle can be conveniently stored at the bottom of the tool as shown in the figure.
Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan 885402-225 www.makita.