ENGLISH (Original instructions) Job Site DAB Radio BMR101 INSTRUCTION MANUAL IMPORTANT: Read Before Using.
ENGLISH (Original instructions) Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. .............................. Read instruction manual. .......... Always recycle batteries Li-ion IMPORTANT SAFETY INSTRUCTIONS WARNING: When using Job Site DAB radio, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: GENERAL SAFETY RULES 1.
Illustration of General View 12 2 3 11 14 4 1 10 5 6 7 8 9 13 15 16 3
Battery Installation Controls: 1. Power button 2. Band button 3. Advanced setting button 4. Info button 5. Preset buttons 6. Auto tune button 7. Volume/Tuning Control/Select knob/button 8. DC IN socket 9. AUX IN1 socket 10. LCD display 11. Soft bended rod antenna 12. Handle 13. Speaker 14. Battery compartment locker 15. AUX IN2 socket 16. Industrial Rechargeable Battery Connect Terminals 1. Pull out the battery compartment locker to release the battery compartment. 2.
3-1. Installing or removing the Slide battery cartridge 1. Button 2. Battery cartridge 3. Red part 3 1 4. To remove the battery cartridge, withdraw it from the Job site radio while pressing the buttons on both sides of the cartridge. Return the battery compartment locker in position to close. 5. Reduced power, distortion and a “stuttering sound” are all the signs that the main battery pack needs to be replaced. 2 Note: The battery pack can’t be charged via the supplied AC power adaptor.
Operating the radio This radio equips with three tuning methods - Scan tuning, Manual tuning and Memory presets recall. Selecting a station - DAB 1. Press the Power button to switch on your radio. 2. Select the DAB mode by pressing the Band button. 3. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob/button to scroll through the list of available stations. 4. Press and release the Volume/Tuning Control/Select knob/button to select the station. The display will show “Tuning.
2. Select the desired waveband by pressing the Band button. Make sure the soft bended rod antenna has been well placed for best FM reception. Try to avoid operating the radio next to a computer screen and other equipment which will cause interference to the radio. 3. Press and release the Auto Tune button and the radio will search and stop automatically when it finds a radio station.
• Repeat pressing and releasing the BAND button until “AU1” or “AU2” is displayed, then the AUX function is activated. MAINTENANCE CAUTION • Never use gasoline, benzene, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Specifications: Power Requirements AC power adaptor DC 12V 1A, center pin positive Battery Cluster battery: 9.6 - 18V Slide battery: 9.6 - 24V Frequency coverage FM 87.