ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver FS2200 FS2300 010101 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH (Original instructions) SPECIFICATIONS Model FS2200 FS2300 Self drilling screw 6 mm 6 mm Drywall screw 5 mm 5 mm No load speed (min-1) 0 - 2,500 0 - 2,500 Overall length 287 mm 290 mm Net weight 1.6 kg Capacities Safety class 1.6 kg /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country.
ENH101-12 you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 6. Do not expose power tools to rain or wet conditions.
GEB017-2 of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care 18. Do not force the power tool.
Lighting up the lamps as shown in the figures. Drive a trial screw into your material or a piece of duplicate material. If the depth is still not suitable for the screw, continue adjusting until you obtain the proper depth setting. 1. Lamp 1. Locator 1mm 1 1 009967 CAUTION: Do not look in the light or see the source of light directly. To turn on the lamp, pull the trigger. Release the trigger to turn it off. 004149 • 1mm 1 1.
Hook Use of locator holder 1. Swells 2. Trapezoidal holes 3. Locator holder 1. Hook 1 009963 1 The hook is convenient for temporarily hanging the tool. 2 ASSEMBLY • 3 CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 009971 The locator can be temporarily held on the locator holder during replacing bit or using without locator.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. • ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
Makita Corporation Anjo, Aichi, Japan 884912D229 8