FP2/FP2SH Series Programmable Controllers 09/2007
CPU Units Top Performance, Full Range of Functions CPU units Selectable from six types, according to the application There are six types of CPU units, including the standard type and the type with preinstalled commonly-used advanced functions. This selection allows for more economical system development according to the application. See page 12 for details.
Memory and I/O Control Flexible Expandability Memory and I/O control Equipped with an adequate program memory and operating memory capacity The body is compact; however, the standard program memory capacity of FP2/FP2SH is as large as 16k/60k steps, and when optional memory is added, 32k/120k steps. A variety of operation memory types are also available.
Positioning Optimal Combination with Servo Drives "RTEX" positioning units NEW ! High-speed 100Mbps communications Compatible with Realtime Express MINAS A4N* network servo systems. Facilitate multi-axis high precision positioning H igh-accuracy multi-axis positioning control achieved by high-speed 100Mbps communication. Compatible with commercially available LAN cables, significantly reducing wiring costs. Two-axis unit available in addition to the four- and eight-axis units.
Positioning High-Speed, High-Precision Positioning Positioning units High-speed, high-accuracy pulse output type positioning unit. Speed command: 4Mpps, Startup time: 0.005ms Support pulse-input type stepping motors, and servomotors. The speed command range is up to 4Mpps, allowing for high-speed and high-accuracy positioning. The startup time is as high as 0.005ms, allowing for a reduction of the tact time.
Analog Control Accurate Process Control Analog control Configuration Multi-range control of a variety of equipment is possible. The units can be directly connected with thermocouples and resistance temperature detectors Analog input unit S upport voltage/current/temperature sensor ranges The analog input unit supports voltage, current, and temperature sensors. The analog output unit supports voltage or current output. Different voltage/current ranges can be controlled concurrently.
Networking Connect all PLCs with Each Other Support a wide variety of networks, such as open networks, PLC links, remote I/O systems, and S-LINK Open network Computer link Ethernet S upports three communication interfaces: 100BASE-TX, 10BASE-T, and 10BASE5. Supports TCP/IP and UDP/IP. Communication among a maximum of eight connections is available. Compatible with user-friendly MEWTOCOL. Supports remote programming.
Flexible Network Slave Unit Continuous Communication in Industrial Applications The Flexible Network Slave (FNS) unit is a powerful, modular network unit used together with the programmable controllers FP and FP SH. By exchanging compact network blocks, you can connect to various networking systems without having to modify your entire hardware platform. The blocks are available for three bus systems: PROFIBUS, DeviceNet and CANopen. Others are planned for the future.
FP Web-Server Program/Operate the PLC using an Ethernet Network The multifunctional FP Web-Server provides users with the option of connecting any FP Series PLC to the Internet/Intranet for bi-directional communication via Ethernet. No changes to the PLC programs are necessary. Simply assign an IP address to the FP Web-Server and connect the PLC to the FP Web-Server via the serial RS232C interface. A standard browser, e.g. MS Internet Explorer, can be used for access at the PC.
Remote I/O Systems Flexible Layout of I/O Devices Remote I/O systems MEWNET-F mode The number of I/O points can be increased up to 8192 and the transmission distance can be extended up to 700m by using the multi-wire link units. MEWNET-F is a remote I/O system that connects I/O units in separate locations with twisted-pair cables. The remote I/O master unit serves as a master station. Slave stations can be selected from the units shown on the next page.
Serial Communication Connect to Various Serial Devices Serial communication control The CPU units have an RS232C port as standard equipment. The communication unit enables connections with RS232C/RS485/ RS422-compatible devices CPU units Multi-communication unit (MCU) All CPU units have an RS232C port as standard equipment.
FP2 Basic CPUs The functions for a medium-scale PLC are squeezed into a compact body. Perfect when combining various devices. Features 1. Compact body The functions for a medium-scale PLC are squeezed into a compact body which requires minimal installation area (H: 100, W: 140, D: 108.3mm). 2. Module specifications enable flexible design Backplanes for 5, 7, 9, 12, and 14 modules are available, and since the units have the same width, you can choose the most economical design for your application. 3.
FP2SH High-Performance CPUs Scanning time of 1ms for 20k steps. A high-performance model for high-speed operation. Features 1. Scanning time of 1ms for 20k steps An operating speed at the top of its class enables high-speed processing and a dramatically decreased tact time. 2. Large programming capacity of up to 120k steps 60k and 120k programming capacities are available depending on the model. 3.
FP2/FP2SH Product Line and Accessories FP2/FP2SH system configurations and unit lineup Unit combinations Most units occupy one slot, i. e. module each, though some units occupy two slots. When selecting a backplane, carefully consider the units and number of slots you need. The power supply unit and CPU unit must be mounted on the CPU backplane. Power supply units 100VAC, 2.5A type FP2-PSA1 Backplanes H type backplanes (For use as both master and expansion backplanes.
FP2/FP2SH Product Line and Accessories E xcept for the 5-module expansion backplane, or backplanes can be expanded. If the backplane is of the H type, up to three backplanes can be added. Most of the units can be used in any combination; however, some combinations are subject to constraints due to the unit type, current consumption, etc. Please contact us for details.
ControlXxxxxxxx FPWIN Pro Xxxxx Programming According to the International Standard IEC 61131-3 Xxxxx Xxxxxxxx FPWIN Pro is the Panasonic programming software developed according to the international standard IEC 61131-3 (for Windows 98, NT V4.0, 2000, ME, XP or Vista). This new version is a result of experience gained over many years. We were one of the first PLC manufacturers to offer an IEC 61131-3 programming software, and we are a leading member of the international organization PLCopen.
Other software tools FP OPC Server and FP Data Analyzer FP OPC Server Connects your favorite industrial application to FP2 or other FP Series PLCs The Panasonic FP OPC Server allows high-performance data transfer between applications supporting the universally accepted OPC PC DA Standard (v1-v3) and Panasonic FP Series PLCs. The FP OPC Server manages the device-specific communication and provides data via a standard interface.
FP2/FP2SH Xxxxx Xxxxxxxx Specifications Xxxxx Xxxxxxxx CPU units FP2 CPU unit Operation speed Program capacity 0.35µs or more High-level 0.93µs or more FP2-C2P FP2-C3P 0.03µs or more 0.06µs or more Built-in RAM 16k steps 60k steps 120k steps With expansion 32k steps Not available Not available Conventional type Max. 768 points Max. 768 points H type Max. 512 points Max. 512 points Conventional type Max. 1600 points Max. 1600 points H type Max. 2048 points Max. 2048 points Max.
Rated frequency Output − 47Hz ~ 63Hz Operating 85 to 132VAC 170 to 264VAC Voltage range 20.4 to 31.2VDC note) 85 to 264VAC 2.5A max. 5A max. Alarm contact capacity 30VDC 1A Alarm contact operation When the ALARM LED of CPU unit is lit 1c contact Alarm contact type Between input and ground terminals, 0.
Max. load current Max. surge current OFF state leakage current ON state maximum voltage drop Repose time Power supply for driving internal circuit OFF→ON ON→OFF Voltage − − − − − − − − − − 0.5A (at 12 to 24VDC) 0.5A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 0.1A (at 12 to 24VDC) 50mA (at 5VDC) 50mA (at 5VDC) 50mA (at 5VDC) 50mA (at 5VDC) 50mA (at 5VDC) 0.1A (at 5VDC) 50mA (at 5VDC) 0.1A (at 5VDC) 0.3A 0.
FP2/FP2SH Specifications ET-LAN units Performance Specification Specifications Item - MEWTOCOL-COM: computer link function (max. 2KB) Communications function - MEWTOCOL-DAT: data transfer (max. 1020 words) Performance Specification - Transparent communication Item Specifications Number of communication connections 8 connections max. - MEWTOCOL-COM: computer link function (max.
Synchronization Transmission Transmission line line Transmission Transmission distance distance Transmission Transmission speed speed (To (To be be set set inin the the system system register) register) Three-core Three-core or or five-core five-core shielded shielded wire wire 15m Length: 1200m 15m Length: 1200m max. max. 300 300 to to 230,400bps 230,400bps Start-stop synchronization Three-core Three-core or or five-core five-core shielded shielded wire wire 15m Length: 1200m 15m Length: 1200m max. max.
Unit specifica Acceleration/ deceleration method Acceleration/ deceleration time Usage voltage range Linear/S-curve acceleration and deceleration Part no.
FP2/FP2SH Xxxxx Xxxxxxxx ProductXxxxxxxx Types Xxxxx CPU units (Built-in RAM) Optional memory Other Operation Product number Built-in RAM speed ROM Expansion RAM IC memory card Clock/calendar Comment memory FP2-C1 Standard type CPU unit note 1) note 2) note 3) From Available Optional Available memoryNot available CPU unit 64-point input FP2-C1D Operation 16k steps Available Other Available FP2 Product number 0.35µs Built-in RAM (See below.) (See below.
IC memory card interface Perfect for data memory. Can also be used for program backup. Battery backups. SRAM AIC52000 Note: Please refer to “FPΣ (Sigma) Product Types” for FP Memory Loader. Note: Please refer to “FPΣ (Sigma) Product Types” for FP Memory Loader.
Specification Product name FP2-AD8VI FP2 Analog FP2-AD8X input unit FP2-RTD FP2 Analog output unit Product name Not insulated Voltage: 1 to 5V, -10 to +10V Current: 4 to 20mA, -20 to +20mA Insulated Voltages, currents, thermocouples, resistance thermometer devices R.T.D.
FP2/FP2SH Dimensions in mm DIN rail mounting groove (35-mm wide DIN EN50022) Mounting dimension (Tolerance: 1.0) * The illustration shows a conventional 7-module type backplane.
Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Please contact our Global Sales Companies in: Europe Headquarters Austria Benelux Czech Republic France Germany Hungary Panasonic Electric Works Europe AG Panasonic Electric Works Austria GmbH PEW Electronic Materials Europe GmbH Panasonic Electric Works Sales Western Europe B.V. Panasonic Electric Works Czech s.r.o. Panasonic Electric Works Sales Western Europe B.V.