Operators Manual

ManualsBrandsMakita ManualsCar Stereo SystemDP4003

DP4003

Drill

DOUBLE

INSULATION

DP4003 (cover) (’100. 10. 24)

Summary of content (8 pages)

PAGE 1
DP4003 (cover) (’100. 10.
PAGE 2
DP4003 (cover) (’100. 10. 24) SPECIFICATIONS Model DP4003 Capacities Steel .................................................................................................................................................... 13 mm Wood ................................................................................................................................................... 38 mm No load speed (min–1) ....................................................................................................
PAGE 3
DP4003 (cover) (’100. 10.
PAGE 4
DP4003 (cover) (’100. 10.
PAGE 5
DP4003 (cover) (’100. 10. 24) ENGLISH Explanation of general view 1 2 3 4 5 6 7 8 9 10 11 12 Tighten Sleeve Ring Switch trigger Lock lever Reversing switch lever Side grip Protrusions Teeth Loosen Depth gauge Reaction 13 14 15 16 17 Reverse Forward Holding against a stud. Holding against a floor. Hook 12. Secure work Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool. 13. Don’t overreach Keep proper footing and balance at all times. 14.
PAGE 6
DP4003 (cover) (’100. 10. 24) 22. Have your tool repaired by an expert This electric appliance is in accordance with the relevant safety rules. Repairing of electric appliances may be carried out only by experts otherwise it may cause considerable danger for the user. Reversing switch action (Fig. 3) ADDITIONAL SAFETY RULES This tool has a reversing switch to change the direction of rotation.
PAGE 7
DP4003 (cover) (’100. 10. 24) Holding tool (Fig. 6 & 7) When drilling a large hole with a hole saw, etc., the side grip (auxiliary handle) should be used as a brace to maintain safe control of the tool. CAUTION: • Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.
PAGE 8
DP4003 (cover) ('100. 10. 24) UK only DOUBLE INSULATION THE ADDITIONAL COMMENT OF ELECTRICAL CONNECTION The tool is double insulated for safety, no earth connection is required. CAUTION: The tool must be connected to a plug having a rated current greater than that of tool. The rated voltage and current appear on the name plate. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code.