ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DP3002 DP3003 DP4000 DP4001 DP4002 DP4003 DP3002 DP4000 DP4002 DP3003 DP4001 DP4003 003006 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model DP3002 Steel Capacities DP3003 DP4000 DP4001 10 mm Wood 32 mm No load speed (min-1) DP4002 DP4003 13 mm 38 mm 0 - 1,200 0 - 950 0 - 700 Overall length 304 mm 296 mm 304 mm 308 mm 304 mm 308 mm Net weight 2.4 kg 2.2 kg 2.5 kg 2.4 kg 2.7 kg 2.5 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
ENH101-15 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
27. 15. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Hook FUNCTIONAL DESCRIPTION • 1. Hook 1 CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. A Switch action 1. Switch trigger 2. Lock lever 003032 1 B 2 003020 CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger.
Installing or removing drill bit 1 1. Depth gauge 1 For Model DP3003, DP4001, DP4003 1. Sleeve 2. Ring 2 003059 OPERATION 003052 Holding tool Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. To remove the bit, hold the ring and turn the sleeve counterclockwise. For Model DP3002, DP4000, DP4002 1. Reaction 2. Reverse 3.
Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass which should be drilled dry. • • • • • OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
Makita Corporation Anjo, Aichi, Japan 884328D228 8 www.makita.