ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Impact Driver BTD129 012780 IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model BTD129 Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm Capacities No load speed (min-1) 0 - 2,500 Impacts per minute 0 - 3,200 Overall length 147 mm Battery cartridge BL1815 / BL1815N Net weight 1.3 kg Rated voltage BL1830 1.5 kg D.C.18 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
ENH101-16 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
terminal to another. Shorting the battery terminals together may cause burns or a fire. 27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service 28. Have your power tool serviced by a qualified repair person using only identical replacement parts.
result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain.
Lighting up the lamp Battery protection system (Lithium-ion battery with star marking) 1 1. Star marking • CAUTION: Do not look in the light or see the source of light directly. 1. Lamp 1 012128 Lithium-ion batteries with a star marking are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life.
ASSEMBLY • Procedure (2) In addition to the procedure(1) above, insert the bit-piece into the sleeve with its pointed end facing in. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 1. Bit 2. Bit-piece 3. Sleeve Installing or removing driver bit or socket bit 1 2 3 011407 To remove the bit, pull the sleeve in the direction of the arrow and pull the bit out.
• Hold the tool firmly and place the point of the driver bit in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. CAUTION: Do not cover vents, or it may cause overheating and damage to the tool. 1. Vent NOTE: • Use the proper bit for the head of the screw/bolt that you wish to use.
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 885128A229 12 www.makita.