ENGLISH Angle Grinder MODEL 9560C MODEL 9560CV MODEL 9563C MODEL 9563CV MODEL 9561C MODEL 9561CV MODEL 9564C MODEL 9564CV MODEL 9562C MODEL 9562CV MODEL 9565C MODEL 9565CV 001005 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS Depressed center wheel diameter Spindle thread 100 mm M10 9560C 9563C 9560CV 9563CV 115 mm M14 9561C 9564C 9561CV 9564CV 125 mm M14 9562C 9565C 9562CV 9565CV -1 No load speed (min ) 11,000 11,000 2,800 - 11,000 2,800 - 11,000 Overall length 289 mm 299 mm 289 mm 299 mm Net weight 1.7 kg 1.8 kg 1.7 kg 1.8 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: 1. Keep work area clean. Cluttered areas and benches invite injuries. 2. Consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locations.
ADDITIONAL SAFETY RULES 1. Always use eye and ear protection. Other personal protective equipment such as dust mask, gloves, helmet and apron should be worn. 2. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 3. Keep guards in place. 4. Use only wheels with correct size and wheels having a maximum operating speed at least as high as the highest No Load Speed marked on the tool’s nameplate.
FUNCTIONAL DESCRIPTION • 002978 CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock CAUTION: Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when installing or removing accessories. 1 • 1.
The tools equipped with electronic function are easy to operate because of the following features. • Electronic constant speed control Possible to get fine finish, because the rotating speed is kept constantly even under the loaded condition. • Soft start feature Soft start because of suppressed starting shock. • Overload protector When the tool would be employed over the admissible load, it will stop automatically to protect the motor and wheel.
001071 1 Installing or removing depressed center grinding wheel/ Multi-disc (accessory) Mount the inner flange onto the spindle. Fit the wheel/disc on the inner flange and screw the lock nut onto the spindle. 2 3 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange 001084 1 To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise.
MAINTENANCE 002985 1 2 1. Exhaust vent 2. Inhalation vent CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. The tool and its air vents have to be kept clean. Regularly clean the tool’s air vents or whenever the vents start to become obstructed.
Memo 9
Memo 10
Memo 11
Makita Corporation Anjo, Aichi, Japan 884311E225