ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Hammer Driver Drill 8271D 8281D 8381D 8391D 008693 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH (Original instructions) SPECIFICATIONS Model Capacities 8271D 8281D 8381D 8391D Steel 10 mm 10 mm 13 mm 13 mm Wood 25 mm 25 mm 25 mm 36 mm Concrete 8 mm 10 mm 10 mm Wood screw -1 No load speed (min ) Blows per minute 5.1 mm x 63 mm Machine screw 6 mm High 0 - 1,300 Low 0 - 400 High 0 - 19,500 Low 13 mm 6 mm x 75 mm 0 - 6,000 Overall length 210 mm 210 mm 218 mm Net weight 1.6 kg 1.7 kg 1.7 kg 234 mm 2.1 kg Rated voltage D.C. 12 V D.C.14.4V D.C.14.4V D.
EN60745 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd, Michigan, Drive, Tongwell, Milton Keynes, MK15 8JD, England For Model 8391D ENG104-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 78 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 80 dB (A). Wear ear protection.
18. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 19. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 20.
29. 30. Follow instruction for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease. 2. 3. GEB003-4 SPECIFIC SAFETY RULES 4. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to hammer drill safety rules. If you use this power tool unsafely or incorrectly, you can suffer serious personal injury. 1. Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss. 2.
FUNCTIONAL DESCRIPTION • Reversing switch action 1. Reversing switch lever CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. A 1 1. Button 2. Battery cartridge 008696 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation.
ASSEMBLY Selecting the action mode 1. Action mode changing ring 2. Arrow • 2 1 CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or drill bit 3 008698 This tool employs an action mode changing ring. Select one of the three modes suitable for your work needs by using this ring. For rotation only, turn the ring so that the arrow on the tool body points toward the mark on the ring.
Blow-out bulb (optional accessory) Drilling operation First, turn the adjusting ring so that the pointer points to the marking. Then proceed as follows. Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 884801B228 12