SDS

ManualsBrandsMakita ManualsBandsaw44-7/8" 18 TPI Bi-Metal Portable Band Saw Blade

SECTION 1. CHEMICIAL PRODUCT AND COMPANY NAME

Safety Data Sheet

Band Saw Blades &

Reciprocating Blades, Unpainted

Part No. 792556-A, 792555-A, 792557-A

792557-B, 1943130

Complies with the OSHA Hazard

Communication Standard :

29 CFR 1910 1200

Makita U.S.A., Inc.

Prepared By : Stan Rodrigues

14930-C Northam Street

La Mirada, CA 90638

Date Revised: 05/19/2015

EMERGENCY CONTACT INFORMATION

Telephone Number for Information: MAKITA: 1-510-657-9881

Emergency Response

For Chemical Emergency

Spills, Leak, Fire, Exposure, or Accident

Call CHEMTREC Day or Night

Within USA and Canada 1-800-424-9300

SECTION 2. HAZARD IDENTIFICATION:

Emergency Overview:

Elevated concentrations of airborne dust may be irritating to the eyes, skin, and respiratory tract.

Routes of Entry:

Inhalation, eye contact, skin contact, ingestion

Potential Health Effects:

Eyes:

Irritant

Skin:

Irritant

Ingestion:

Irritant

Inhalation:

Irritant

Aluminum:

Irritation eyes and respiratory system.

Carbon:

Irritation eyes, skin, and respiratory system.

Chromium:

Irritation eyes, skin, and respiratory system, sensitization dermatitis, lung fibrosis; oxidizing chromium

metal may generate hexavalent chromium, which is a human carcinogen (OSHA, IARC, and NTP).

Cobalt:

Cough, dyspnea, wheezing, decreased pulmonary function, Weight loss, dermatitis, diffuse nodular

fibrosis, respiratory hypersensitivity, asthma. Possible human carcinogen (IARC).

Manganese:

Parkinson’s, asthenia, insomnia, mental confusion, metal fume fever, dry throat, tightness in chest,

dyspnea, rales, flu-like fever, low back pain, vomiting, malaise, fatigue, kidney damage.

Molybdenum:

Irritation to eyes, skin, respiratory system, anorexia, incoordination, dyspnea, anemia.

Nickel:

Sensitization dermatitis, allergic asthma, pneumonitis. Reasonable anticipated to cause cancer (IARC

and NTP).

Silicon:

Irritation to respiratory system.

Titanium:

Irritation of eyes, skin, respiratory system, respiratory disease.

Tungsten:

Irritation to eyes, skin, respiratory system, diffuse pulmonary fibrosis, loss of appetite, nausea,

coughing, blood changes.

Summary of content (6 pages)

PAGE 1
SECTION 1. CHEMICIAL PRODUCT AND COMPANY NAME Safety Data Sheet Band Saw Blades & Reciprocating Blades, Unpainted Part No. 792556-A, 792555-A, 792557-A 792557-B, 1943130 Complies with the OSHA Hazard Communication Standard : 29 CFR 1910 1200 Makita U.S.A., Inc.
PAGE 2
CONTINUED: SECTION 2.
PAGE 3
CONTINUED: SECTION 3. COMPOSITION, INFORMATION OR INGREDIENTS Phosphorus 0.025 7723-14-0 0.1 0.1 Silicon 0.35 7440-21-3 15 10.0 Sulfur 0.015 7704-34-9 Not Established Not Established Vanadium 0.20 7440-62-2 0.5 Ceiling, respirable 0.05 (Oxide) PREPARED EDGE BACKING MATERIAL – MATRIX II HIGH SPEED STEEL EDGE WIRE INGREDIENT: MAX% CAS NO. Carbon 0.80 7440-44-0 OSHA PEL (mg/m3) 15 (total dust) Chromium 4.40 7440-47-3 1 (as metal) 0.5 Cobalt 8.30 7440-48-4 0.1 0.
PAGE 4
SECTION 5. FIRE FIGHTING MEASURES Flammable Limits in Air, Upper: Lower: N/A N/A Flash Point: N/A Autoignition Temperature: N/A Extinguishing Media: N/A Special Fire Fighting Procedures: N/A Unusual Fire and Explosion Hazards: N/A Section 5 Notes: Dust generated during work activities should be cleaned utilizing HEPA vacuums to comply with NFPA (654) combustible dust guidelines. SECTION 6.
PAGE 5
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: pH As Supplied: Steel Blade NA Freezing Point: NA Specific Gravity (H2O = 1): 7.9 Odor: Boiling Point: NA NA Vapor Pressure (mmHg): NA Evaporation Rate: NA Physical State: Solid Melting Point: Approximately 2800°F Vapor Density (Air = 1): NA Basis (=1): Solubility in Water: Insoluble Volatile Organic Compound (VOC): N/A Viscosity: Percent Solids By Weight: NA 100 Percent Volatile: NA Molecular Weight: NA SECTION 10.
PAGE 6
SECTION 13. DISPOSAL CONSIDERATIONS Waste Disposal Method: Waste materials should be recycled. RCRA Hazard Class: N/A SECTION 14. TRANSPORT INFORMATION U.S.