GB Screwdriver Instruction Manual F Visseuse Manuel d’instructions D Schrauber Betriebsanleitung I Avvitatrice Istruzioni per l’uso NL Schroevedraaier Gebruiksaanwijzing E Atornillador Manual de instrucciones P Aparafusadora Manual de instruções DK Skruemaskine Brugsanvisning S Skruvdragare Bruksanvisning N Skrutrekker Bruksanvisning SF Ruuvinväännin Käyttöohje GR Κατσαβίδι Οδηγίες χρήσεως 6805BV
1 2 3 4 5 6 7 8 2
ENGLISH Explanation of general view 1 2 3 4 Front cap Locator Pointer Adjusting ring 5 6 7 8 Low High Speed control screw Switch trigger SPECIFICATIONS Model 6805BV Capacities Self drilling screw ........................................... 6 mm Machine screw ............................................... 8 mm Wood screw ................................................ 6.2 mm Bit shank size ............................................... 1/4” Hex No load speed (min–1) ................................
Switch action (Fig. 6) CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. To start the tool, simply pull the trigger. Tool speed is increased by increasing pressure on the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
NEDERLANDS Verklaring van algemene gegevens 1 2 3 4 Voorkap Afstandsstuk Wijzer Instelring 5 6 7 8 Lager Hoger Snelheidsschroef Trekkerschakelaar TECHNISCHE GEGEVENS Model 6805BV Capaciteit Zelf borende schroef ......................................6 mm Machine schroef .............................................8 mm Hout-schroef ...............................................6,2 mm Aansluiting bits .......................................1/4” Zeskant Toerental onbelast (min–1) .........................
Instellen van het aandraaikoppel (Fig. 5) Het aandraaikoppel van dit apparaat is naar wens instelbaar, voor het aandraaien van machineschroeven, houtschroeven, inbusbouten e.d. met een vast aandraaikoppel. Voor het instellen van het aandraaikoppel gebruikt u de instelring. Voor echter hieraan te draaien, dient u eerst het afstandsstuk zo ver mogelijk in de richting van de pijl te draaien, zonder dit te forceren.
ENH101-5 ENGLISH ITALIANO EC-DECLARATION OF CONFORMITY DICHIARAZIONE DI CONFORMITÀ CON LE NORME DELLA COMUNITÀ EUROPEA We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents, EN60745, EN55014, EN61000 in accordance with Council Directives, 89/336/EEC and 98/37/EC.
ENH101-5 PORTUGUÊS NORSK DECLARAÇÃO DE CONFORMIDADE DA CE EUs SAMSVARS-ERKLÆRING Declaramos sob inteira responsabilidade que este produto obedece às seguintes normas de documentos normalizados, EN60745, EN55014, EN61000 de acordo com as directivas 89/336/CEE e 98/37/CE do Conselho. Vi erklærer på eget ansvar at dette produktet er i overensstemmelse med følgende standard i de standardiserte dokumenter: EN60745, EN55014, EN61000, i samsvar med Råds-direktivene, 89/336/EEC og 98/37/EC.
ENG003-2 ENGLISH ITALIANO For European countries only Modello per l’Europa soltanto Noise and Vibration The typical A-weighted sound pressure level is 79 dB (A). Uncertainty is 3 dB (A). The noise level under working may exceed 85 dB (A). – Wear ear protection. – The typical weighted root mean square acceleration value is not more than 2.5 m/s2. These values have been obtained according to EN60745. Rumore e vibrazione Il livello di pressione sonora pesata secondo la curva A è di 79 dB (A).
ENG003-2 PORTUGUÊS NORSK Só para países Europeus Gjelder bare land i Europa Ruído e vibração O nível normal de pressão sonora A é 79 dB (A). A incerteza é de 3 dB (A). O nível de ruído durante o trabalho pode exceder 85 dB (A). – Utilize protectores para os ouvidos – O valor médio da aceleração é inferior a 2,5 m/s2. Estes valores foram obtidos de acordo com EN60745. Støy og vibrasjon Det vanlige A-verktet lydtrykksnivå er 79 dB (A). Usikkerheten er på 3 dB (A).
31
Makita Corporation Anjo, Aichi Japan 883587D980