ENGLISH (Original instructions) INSTRUCTION MANUAL Trimmer 3707 3707F 3707FC 004548 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model 3707 / 3707F 3707FC Collet chuck capacity 6 mm or 1/4" 6 mm or 1/4" No load speed (min-1) 35,000 26,000 Overall length 204 mm 204 mm Net weight 1.2 kg 1.3 kg Safety class /II /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
ENH101-15 you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 6. Do not expose power tools to rain or wet conditions.
GEB019-4 of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care 18. Do not force the power tool.
kept constant even under load condition. Soft start Soft-start feature minimizes start-up shock, and makes the tool start smoothly. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
Templet guide OPERATION Set the tool base on the workpiece to be cut without the bit making any contact. Then turn the tool on and wait until the bit attains full speed. Move the tool forward over the workpiece surface, keeping the tool base flush and advancing smoothly until the cutting is complete. When doing edge cutting, the workpiece surface should be on the left side of the bit in the feed direction.
Straight guide (optional accessory) (A) 001709 Circular work 001706 The straight guide is effectively used for straight cuts when chamfering or grooving. Attach the guide plate to the straight guide with the bolt, the wave washer, the flat washer and the wing nut. 1. Bolt 2. Guide plate 3. Straight guide 4. Wing nut 1 2 3 1. Wing nut 2. Guide plate 3. Straight guide 4. Center hole 5.
MAINTENANCE 1. Nail 2. Center hole 3. Straight guide 1 • 2 • 3 001712 Trimmer guide CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Replacing carbon brushes 1. Limit mark 1 001713 001145 Trimming, curved cuts in veneers for furniture and the like can be done easily with the trimmer guide.
"U"Grooving bit OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Cove beading bit Drill point double flush trimming bit 005121 6 6E 005129 D A L1 L2 L3 mm L4 6 1/4" 6 70 40 12 14 mm 006488 D A L1 L2 6 20 43 8 R 4 6 25 48 13 8 006464 Corner rounding bit Ball bearing flush trimming bit 005125 005130 mm D 8R 6 8RE 1/4" 4R 6 4RE 1/4" A1 A2 L1 L2 L3 R 25 9 48 13 5 8 20 8 45 10 4 4 mm D A L1 L2 6 1/4" 10 50 20 006465 Ball bearing corner rounding bit 006489 Chamfering bit 005131 005126 mm D A L1 L2
Ball bearing roman ogee bit Ball bearing chamfering bit 005132 005135 mm D 6 1/4" 6 A1 A2 L1 L2 26 8 42 12 45 20 8 41 11 60 005133 L1 L2 L3 mm R 12 A3 8 40 10 5.5 4 12 8 42 12 4.5 7 A2 6 26 006468 Ball bearing cove beading bit 005134 D 6 20 6 26 A2 L2 L3 8 L1 40 10 8 42 12 mm R2 4.5 R1 2.5 4.5 4.5 3 6 NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.
Makita Corporation Anjo, Aichi, Japan 884437E223 12 www.makita.