2 5 5 m m ( l O " ) MODEL 24016 3 5 5 m m ( 1 4 " ) MODEL LS1410 INSTRUCTION MANUAL Miter Saw & Standard Equipment I 0 Elbow (Dust Spout) @ Locking Stopper @ Fence 0 Base @ Operating Handle (Switch) @ Motor Housing @ Safety Cover 8 Turn Base A Miter Scale & Pointer 'ii, Miter Clamp Grip @ Socket Wrench @ Saw Blade DOUBLE INSULATION SPEC1 FICATIONS __ 24010 2F:oqm 12mmrll2mm 2 5 mm I7 112"l x 14-314"l 72mmr90mm 12 112"l x 13-112"l ~ 14 314 'I x 15.ll8"l 14 314"l x 14 112"l 1.
PRELIM IN AR Y I NST R UCTl ONS BEFORE CONNECTING YOUR TOOL TO A POWER SOURCE Be sure you have read all GENERAL POWER TOOL S A F E T Y RULES GENERAL SAFETY PRECAUTIONS 1 . K E E P GUARDS IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit o f checking to see that keys and adjusting wrenches are removed from tool before turning it on. 3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. 4 . AVOID DANGEROUS ENVIRONMENT.
2. Installing Saw Blade Press t h e shaft lock and use the socket wrench provided to loosen t h e hex bolt which serves to hold t h e saw blade in place. Then remove t h e outer flange and install the saw blade o n t h e arbor shaft inside t h e safety cover. Model 2401B is equipped with an addaptor ring (16) for a 1" arbor hole. Use this ring t o install a Makita blade. Without t h e ring, there is a 5/8" arbor hole. 3.
8. Tips o n Cutting This tool is equipped with an electric safety brake which stops the saw blade within three seconds from t h e moment you release the switch in t h e operating handle. This safety feature can also be used to advantage, for example, in cutting certain materials like light aluminum o r plastics where special shapes are required, o r in edge cuts in wood where only a little stock is c u t off.
/ Saw Blades Chisel tooth combination saw blade F o r rip and cross-cut work. Most freauentlv used for general carpentry. D M lmml __- NO. 255-7 260 Miter saw blade 2551 1 0 ' I 2 6 0 110.114"1 -7 -4 N o . 255 N-q. 255 -4 A 255-4 255 -4A Carbide-tipped saw blade 2551 di:Y&l r,:h 2511,,1 Far Model Part No. 7214074 721411-3 36 24018 For smooth cutting of wood. For smooth cutting of aluminum.