ENGLISH (Original instructions) INSTRUCTION MANUAL Portable Band Saw 2107F 005893 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH (Original instructions) SPECIFICATIONS Model Max. cutting capacity 2107F Round workpiece 120 mm dia. Rectangular workpiece 120 mm x 120 mm Blade speed 1.0 - 1.7 m/s Length Blade size Overall dimensions 1,140 mm Width 13 mm Thickness 0.5 mm HxWxL 496 mm x 184 mm x 249 mm Net weight 6.0 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
27. 15. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Lighting up the lamps FUNCTIONAL DESCRIPTION • 1. Lamp switch CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 1 Switch action 1 1. Lock button 2. Switch trigger 005897 CAUTION: Do not apply impact to the light, which may cause damage or shorted service time to it. To turn on the lamp, press the "I"(ON) side of the lamp switch. Press the "O"(OFF) side to turn it off.
4 1 2 Adjusting the protrusion of stopper plate 1. Blade 2. Bearing 3. Upper holder 4. Lower holder 1 1. Screw 2. Stopper plate 3. Blade B 3 005900 3 Insert the blade between the bearings of one blade guide first and then into the other blade guide. The blade back should contact the bearings in the lower portion of the blade guides.
• • CAUTION: Applying excessive pressure to the tool or twisting of the blade may cause bevel cutting or damage to the blade. When not using the tool for a long period of time, remove the blade from the tool. 1 Replacing tires on wheels 1. Wheel 2. Tire 3. Lip 1 2 1. Cutting wax 3 004750 When the blade slips or does not track properly because of badly worn tires, or the lip of the tire on motor side gets damaged, the tires should be replaced.
Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes. Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. 1 2 1. Screwdriver 2.
Makita Corporation Anjo, Aichi, Japan 884563F228 12