User Guide

Table Of Contents

MakerFocus ESP8266 WiFi Module

ESP8266 WiFi Deauth Detector V3

User guide:

What is wifi deauthentication attack: https://github.com/spacehuhn/esp8266_deauther;

USB attack firmware: https://github.com/spacehuhn/esp8266_deauther/releases;

RGB LED Test: You have to install Adafuit RGB LED library first.

https://github.com/lspoplove/DSTIKE/blob/master/Deauther_RGB_Test.ino;

Here you have to change "define DIN_PIN 15" to "define DIN_PIN 4";

CP2102 Driver Download: https://github.com/spacehuhn/esp8266_deauther/wiki

What is it?

Deauth detector could detect a Wi-Fi deauthentication attack. Also you can flash any

program by yourself.

If you do not know what is wifi deauthentication attack.

You can have a look here: https://github.com/spacehuhn/esp8266_deauther

After you know how it works you can also flash deauth program to this board. This

usb kit also could be an attack tool to perform WiFi attack.

What makes it special?

Buzzer -- GPIO5

RGB LED-- GPIO4

Deauth detector V3 replaced high light LED with a buzzer. Now it could show

different status by different color and sound.

PAGE 1
MakerFocus ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 User guide: What is wifi deauthentication attack: https://github.com/spacehuhn/esp8266_deauther; USB attack firmware: https://github.com/spacehuhn/esp8266_deauther/releases; RGB LED Test: You have to install Adafuit RGB LED library first. https://github.com/lspoplove/DSTIKE/blob/master/Deauther_RGB_Test.ino; Here you have to change "define DIN_PIN 15" to "define DIN_PIN 4"; CP2102 Driver Download: https://github.
PAGE 2
If you are under WiFi deauth attacked, RGB LED will turn red and buzzer start playing music. If nothing happened then RGB LED turn green. You can plug it into power bank or any 5V USB port. It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control buzzer or RGB LED. ESP-12E inside, it has 4MB memory.Simple code test: USB attack firmware: https://github.com/spacehuhn/esp8266_deauther/releases RGB LED Test: You have to install Adafuit RGB LED library first.