R Armor Blue Shark INSTRUCTIONS FOR USE www.makerfire.
Disclaimer & Warning 1. Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damages caused while using this product, and its consequences.
2.Safe flight Environment Fly in Open Areas Maintain Line of Sight Fly Below 98.4 feet ( 30 m) 1.Make sure the surrounding area is free of all people,pets or other obstacles before you start to fly your drone. 2.Your drone is designed for indoor or outdoor use.However,it is not recommended to fly the drone inside if there is limited space, or outside if there is any wind. 3.Keep a safe playing distance between you and the drone all the time. 3.
Package list A Drone Controller Battery Screwer B Propeller Ax2,Propeller Bx2 USB charging cable x 1 INSTRUCTION MANUAL MINI FPV GOGGLES Specification Drone Transmitter Wheelbase:66mm Dimensions: 83.5x83.5x45.6mm Weight: 23g(without battery) Motor:6015 1S brushed motor Battery: Li-po,3.7v 250mAh Max Flight Time: 5 mins Operating Temperature Range: 0 to 40 C o Operating Frequency: 2.4GHz Max transmission distance: 30m Battery: 1.
Drone’s details Antenna Propeller A (Clockwise) Propeller B (Counter Clockwise) Shell FPV system PCB Battery HEAD Propeller B (Counter Clockwise) Propeller A (Clockwise) Propeller guardrail 6015 1s brushed motor It is crucial that all the propellers are installed in the correct position (Pay attention to the letter A or B printed underneath each propeller.
Charging the drone battery Plug the USB plug into the computer’s USB port (or the charger with a DC5V output USB port).When connected,the indicator of the USB charging cable will on.Then connect the battery to the USB charging cable. The indicator light off means it is in charging; and the indicator light on means it is fully charged.Charge takes 30-40 minutes.For safety, it's better to keep the charger in sight when charging.
3. Push left throttle up once & controller will beep once 4. Pull left throttle down once & controller will beep again. Pairing is complete once the drone lights & controller lights stop flashing Flying your drone 1. Taking Off/ landing: Taking Off Take Off/ Landing Method 2 Method 1: Press the one key start button, the propellers will rotate . Push up the throttle left stick to take off.
2. Altitude & rotate: Use “throttle left stick” to control the altitude & rotation during flight. 3. Forward / backward / left / right: Use “throttle right stick” to control forward, backward,left & right movement during flight. 4.
1.Speed modes: Select between 3 speed modes: 40% speed (controller makes 1 beep);60% speed (controller makes 2 beeps); 100% speed (controller makes 3 beeps) o 2.360 Flips: Perform 360 flips by pressing the “flip” button and immediately push the right stick to the direction that you want the drone flip. 3.Auto return button: Press the auto return button, the drone will automatically return in the direction of the tail before takeoff.
Trouble flying Problem The indicator lights of the drone are flashing and does not respond to the transmitter. The propellers spin,but the drone cannot take-off. The drone sways sharply. Drone cannot stay balanced in flight. The drone is out of control after crashing. Possible cause 1.Transmitter is not synced to the drone. 2.Insufficient battery power. Solution 1.Refer to the preparation for FLIGHT and pair again. 2.Recharge the battery. 1.Insufficient battery power. 1.Recharge the battery. 2.