Technical support： tec-support@makeblock.com www.makeblock.com @Makeblock @Makeblock @Makeblock D1.2.11_7.40.
The Modular & Programmable Drone USER MANUAL
Table of Contents P02 Downloading the Software P10 Introduction to Stickers P03 Parts List P12 P04 Introduction to Master Controller Module P18 Aircraft Mode User Guide ·Operating Environment ·Items to Note ·Installation Steps ·Controls P05 Introduction to Battery P27 P06 Introduction to Power Module P31 Hovercraft Mode User Guide ·Operating Environment ·Items to Note ·Installation Steps ·Controls Custom Mode User Guide ·Methods to Use ·Operating Environment ·Items to Note ·Programming FAQ
Downloading the Software A tablet or smartphone is required to control the Airblock. App Store Download Search "Makeblock" and install the application from app store. Official Website Download http://learn.makeblock.com/en/software/ Login to download the corresponding version of application. System and Device Requirements iOS devices (including iPhone5, iPad mini, iPad 3 or later models）need to support iOS 9.0 or above versions.Android devices need to support Android 4.1 or above versions.
Parts List Master Controller Module Battery Charger Charging Cable Power Modules Hovercraft Base Protective Cover 03
Introduction to Master Controller Module The master controller module includes components such as 6 power module plug-in sockets, 3 colored light indicators, ultrasonic sensor, barometer, gyroscope, Bluetooth, microcontroller chip, etc. Colored Light Indicator Front View Ultrasonic sensor: for measuring distance. Works together with the barometer to sense the height change value of the aircraft. Plug-in Socket Colored light indicator: functions as power supply indicator.
Battery Airblock does not have a power switch. When a battery with sufficient power is inserted into master controller module, the master controller module automatically enters standby mode. When inserting battery into master controller module or battery charger, please ensure that the contact points are placed in the correct direction. Charger will display a red light while battery is charging, and a green light when battery is fully charged.
Power Module Introduction to structure The Power Module is made up of parts such as the motor, propellers, plug, frame, etc. Indicator light installed within the frame will light up when motor starts running. The light indicator and foot pad of the aircraft head power module are red. For other power modules, the foot pad is black and light indicator is green.
Power Module Introduction to Operating Principles In order to offset the self-rotation of the aircraft, the propellers are classified as black clockwise rotating propellers and red counter-clockwise rotating propellers; the motors are classified as clockwise rotating and counter-clockwise rotating as well. After successful connection to the master controller module, the motor will start spinning, thus pushing air downwards which in turn generates an upward thrust.
Power Module Installation Angle Each power module may be installed onto its corresponding port on the master controller module at 4 different angles.
Power Module Port Numbers Install red propeller power module onto Port 1, 3, 5 respectively (aircraft head module with red foot pad will be installed onto Port 1). Install black propeller power module onto Port 2, 4, 6 respectively.
Stickers Power Module Stickers 10 Hovercraft Stickers Fuselage Stickers（Random gift. The picture is for reference only, please make the object as the standard.
Stickers Power Module Stickers: Attach to the side of power module, in order to better distinguish the direction of fuselage in flight. It is recommended to attach red sticker to the aircraft head power module (Position 1) and green sticker to a black propeller power module (Position 4). The other power modules do not need stickers. There are 3 different styles of stickers -- you can choose which to use.
Aircraft User Guide
Aircraft User Guide Operating Environment Space larger than 3x3x3 meters are recommended for indoor flying. ！ Items to Note： Land surfaces: aircraft should take off from relatively hard and flat surfaces. Soft surfaces such as carpets and grass may cause interference to the ultrasonic sensor. Water surfaces: do not operate aircraft on water surfaces, or fly aircraft in the air above water surfaces.
Aircraft User Guide Installation Step 1 Installing the aircraft head power module Install aircraft head power module with red foot pad onto Port 1 of the master controller module. ！ Note: If head module is installed in the incorrect position, it will not properly control the direction of flight.
Aircraft User Guide Installation Step 2 Installing the other power modules Install the remaining power modules in sequence onto the master controller module.
Aircraft User Guide Installation Step 3 Installing the battery After fully charged battery is inserted, Airblock automatically turns on and enters standby mode. The top indicator light of master controller module will turn on and display a white light. When Bluetooth connection is successful, the light will turn red. ！ Items to Note: Before actually taking off, please ensure Airblock has its top facing upward and is placed on flat ground. The picture on the right shows the bottom part of Airblock.
Aircraft User Guide Controls Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move tablet or smartphone within close distance to running Airblock, Bluetooth connection should be paired automatically. If connection is not successful, tap the list " " icon on the bottom right hand side of the touchscreen and select manually. Step 2 Open aircraft control interface after successful connection is made.
Hovercraft User Guide
Hovercraft User Guide Operating Environment Recommended for use on flat, level land surfaces. ！ Items to Note： Software: App controls are separate for land and water modes. Make sure to select the corresponding mode for your environment. Land surfaces: do not drive or fly hovercraft on muddy surfaces, uneven surfaces, or mesh floors. Water surfaces: do not drive or sail hovercraft on water surfaces with waves or obstacles.
Hovercraft User Guide Installation Step 1 Installing the battery Direction of battery contact points 20
Hovercraft User Guide Installation Step 2 Installing the protective cover Installation of protective covers is required in Hovercraft mode to protect propellers from damage and to prevent propellers from causing damage. Protective covers are required only on top part of the power modules at Port 1 and 4. There are two types of protective covers; take note during installation.
Hovercraft User Guide Installation Step 3 Connect the aircraft head power module and a black propeller power module to Port 1 and 4 on the master controller module respectively.
Hovercraft User Guide Installation Step 4 After connecting power modules to the master controller module, fit the master controller module onto the hovercraft hull. ！ Note: Port 1 faces forwards (the smaller end of the hull is the bow) If the master controller module is installed in the incorrect direction, it will not be able to control the direction of the hovercraft.
Hovercraft User Guide Installation Step 5 Protective covers are required on both the top and bottom parts of the other power modules. There are two types of protective covers; take note during installation.
Hovercraft User Guide Installation Step 6 After fitting the protective covers, attach the 4 power modules onto master controller module according to the directions in diagram below. Check that the protective covers are fitted in the accurate places and that the power modules are attached securely to the master controller module.
Hovercraft User Guide Controls Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move tablet or smartphone within close distance to running Airblock, Bluetooth connection should be paired automatically. If connection is not successful, tap the list " " icon on the bottom right hand side of the touchscreen and select manually. List 26 Step 2 Open hovercraft control interface after successful connection is made.
Custom Mode User Guide Methods to Use You may connect the power modules to the master controller module at different angles and use the Airblock as a propeller and blower according to your own creativity. Propulsion forces in different directions and wind speeds of varying intensity may be achieved by setting the motor at different rotating speeds in the programming application.
Custom Mode User Guide Operating Environment Recommended for use on flat, clean floors or tables. ！ Items to Note： Land surfaces: it is best to use Airblock on smooth, flat, and level land surfaces. Water surfaces: only the hovercraft may be placed in the water. Use of Airblock in other forms on water surfaces must not be in contact with water. Dropping the Airblock into water by accident may result in fire damage due to a short circuit. In the air: Airblock is unable to fly normally in Custom Mode.
Custom Mode User Guide Programming Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move tablet or smartphone within close distance to running Airblock, Bluetooth connection should be paired automatically. If connection is not successful, tap the list " " icon on the bottom right hand side of the touchscreen and select manually.
Custom Mode User Guide Step 3 In "DESIGN" mode, drag and drop required keys modules into the edit section on the right. Tap on the module to enter into "Code" mode. Step 4 In "Code" mode, drag the motor speed block to "When button pressed" and enter the corresponding number to set the motor speed. At the same time, make sure the motor speed is "0" for "when button released", otherwise the motor may continue uncontrolled, causing danger.
Common Problems Propellers are not spinning Direction is incorrect Poor connection 1. Check if the connection of the power module and master controller module is too widely-spaced, if connection is uneven, or if foreign matter is present. 2. Check if the contact points of the metal spring pins have oxidized or are damaged. Aircraft head module is installed in the wrong position 1.
Common Problems Power supply indicator light does not light up Aircraft is unable to take off Battery has no power Try again after charging battery for half an hour or longer. Power supply is insufficient After successful connection to the application, you may check the power supply level in the control interface. If power supply is less than 20%, please charge the battery. Incorrect battery installation Battery is installed upside down or in the incorrect location.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
