Multi Media System
Bluetooth function (optional) The Multi Media System is equipped with Bluetooth technology, which allows connecting mobile phones enabled for this technology. Using this connectivity you can handle calls (with the hands-free function) and the telephone phonebook through the Multi Media System. The connection can be made in two ways: 1. Pairing a telephone to the Multi Media System. 2. Connecting a telephone stored in the Multi Media System.
Main Bluetooth page Disconnection Press the MODE button to access the Bluetooth page (see Fig. 80). This page shows the following parameters: A - Telephone connection status B - Telephone service provider C - Name of the paired telephone D - Battery charge status E - Roaming (if active). The Bluetooth feature can be disconnected in three different ways: 1. Disconnecting from the mobile phone, following the operations described in the specific instruction manual, or turning off the phone 2.
Turning on the Multi Media System Handling calls Bluetooth-related functions Each time the Multi Media System is turned on and Bluetooth mode is active, the system starts searching for the already paired telephones (contained in the stored list). The search starts from the last telephone paired and then chronologically runs through the previous ones.
Bluetooth functions 3 Select “Bluetooth functions” by turning the knob (13), then press the same knob to confirm and access the following functions (see Fig. 84): - Bluetooth activation mode - List of connected peripherals - Change Bluetooth name for the system - Authentication code - Phonebook synchronization mode Bluetooth activation mode This menu (see Fig.
Connect/Disconnect Use the knob (13) to select the item corresponding to the telephone you wish to connect/disconnect. This function allows you to start the procedures for connecting or disconnecting the telephone from the Multi Media System. Delete This option allows you to delete the selected item from the list of telephones stored. Delete all This option allows you to delete the entire list of telephones stored.
3 As a consequence, the phonebooks downloaded can also be handled from the Multi Media System, but not the ones not downloaded. Specific messages on the display will indicate whether the phonebooks have been successfully/unsuccessfully downloaded. Receive all cards Select this option to copy all the addresses and phone numbers in the phonebook. During the copying procedure, a dedicated message will be displayed. To cancel the copying procedure, press the ESC button (6).
LIMITED RIGHTS NOTICE (JUN 1987) These data are submitted with limited rights under Government Contract No. _____________________ (and subcontract _________________, . if appropriate).
