User's Manual

ManualsBrandsMagneti Marelli ManualsElectronicsBluetooth Module

Bluetooth audio

Overview

▷ Playback of music files from external devi‐

ces

such as audio devices or mobile phones

via Bluetooth is possible.

▷ The sound output is via the vehicle loud‐

speakers.

▷ The volume of the sound output depends on

the device. If applicable, change volume set‐

tings on the device.

▷ Up to four external devices can be registered

with the vehicle.

Requirements

▷ Suitable device. Visit www.bmw.com/blue‐

tooth for more information.

▷ Device ready for operation.

▷ Ignition switched on.

▷ Bluetooth in the vehicle, see page 79, and

device activated.

▷ Bluetooth presettings must be made on the

device, for example connect without confir‐

mation or visibility, see Owner's Handbook

of the device.

▷ A number with a minimum of 4 and a maxi‐

mum 16 positions is specified as the Blue‐

tooth passkey. Only required for non-recur‐

ring registration.

▷ Vehicle is at rest.

Connecting

Connecting the device

Only

connect the device when the vehicle

is stationary. Otherwise, you may become dis‐

tracted and endanger the vehicle occupants and

other road users.◀

1. "Settings"

2. "Connections"

3. "Bluetooth"

4. "Add new device"

The Bluetooth name of the vehicle is dis‐

played in the control display.

5. To perform other operations on the device;

see

the Owner's Handbook of the device: for

example finding/connecting Bluetooth de‐

vice or new device.

The Bluetooth name of the vehicle is shown

on the display of the device.

6. Select the Bluetooth name of the vehicle on

the display of the device.

7. Request using the iDrive or mobile phone to

enter the same Bluetooth passkey. Enter

and confirm passkey.

Compare the control number in the vehicle

display with the control number in the mo‐

bile phone display. Confirm the control num‐

ber in the mobile phone and on the vehicle.

"OK"

8. Select functions for which the device is to be

used, for example "Bluetooth audio".

9. "OK"

If connection was successful, the device is

shown as connected.

White symbol: device active as audio source.

connection was unsuccessful: What to do if...,

see page 62.

Seite 60

Entertainment External devices

Online Edition for Part no. 01 40 2 917 877 - II/13

Summary of content (25 pages)

PAGE 1
Entertainment External devices Connecting Connecting the device Only connect the device when the vehicle is stationary. Otherwise, you may become dis‐ tracted and endanger the vehicle occupants and other road users.◀ 1. "Settings" 2. "Connections" 3. "Bluetooth" Bluetooth audio 4. "Add new device" Overview ▷ Playback of music files from external devi‐ ces such as audio devices or mobile phones via Bluetooth is possible. ▷ The sound output is via the vehicle loud‐ speakers.
PAGE 2
External devices Connecting a certain device 3. "External devices" An already connected device can be connected as an active audio source. 4. Entertainment Select the symbol. Connection not possible if data is exchanged using a mobile phone equipped with Bluetooth. Requirements If necessary, activate the audio connection of the desired device from the list of connected devices. 1. "Settings" Playback is automatically started. 2. "Connections" 3. "Bluetooth" Changing the track 4.
PAGE 3
Entertainment External devices Playback is disrupted when a button is pressed on the device or if other messages are issued via the device. 7. "Audio" 8. "OK" Disconnecting a device 1. "Settings" 2. "Connections" 3. "Bluetooth" 4. Highlight the device to be disconnected. 5. Call up "Options". ▷ Switch off keypad acknowledgement tones and other audio output at the device. Playback is interrupted by phone calls or traffic announcements and does not resume automat‐ ically.
PAGE 4
Communication Telephone Telephone Vehicle Equipment This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems. Principle Mobiles or other external devices, for example audio player, can be connected to the vehicle by Bluetooth.
PAGE 5
Telephone Functions The following functions can be assigned to a mobile when registering. Communication Connecting/disconnecting the mobile phone Operating requirements Telephone and additional telephone ▷ Suitable mobile phone. A mobile phone can be assigned the telephone or supplementary telephone function. ▷ Mobile phone operational. Data transfer A mobile phone assigned the telephone or sup‐ plementary telephone function may also be as‐ signed the data transmission function.
PAGE 6
Communication Telephone 6. Select desired functions. ▷ "Bluetooth audio" 8. Select the function for which you would like to use the mobile phone. ▷ "Office" 9. "OK" ▷ "Secondary telephone" ▷ "Show pictures" 7. Tilt the controller to the left. Connecting Connecting the mobile phone Only connect the mobile phone when the vehicle is stationary. Otherwise, you may be‐ come distracted and endanger the vehicle oc‐ cupants and other road users.
PAGE 7
Telephone Communication 3. "Bluetooth" Disconnecting a mobile phone 4. Select the mobile phone to be connected. 1. "Settings" Functions assigned to the mobile phone before disconnection are reassigned to the mobile phone upon reconnection. If applicable, this function was deactivated for a previously con‐ nected mobile phone. 2. "Connections" Configuring mobile phone 6. "Delete device" Functions can be activated or deactivated with a registered and connected mobile phone. What to do if... 1.
PAGE 8
Communication Telephone ▷ Switch the mobile phone off and on again. Controls ▷ Too high or low ambient temperatures? Do not subject the mobile phone to extreme ambient conditions. Adjusting the volume Telephone functions not possible. ▷ Configure mobile phone and connect with the telephone or additional telephone func‐ tion. No phone book entries, not all entries or incom‐ plete entries are displayed. ▷ Transfer of the phone book entries has not completed.
PAGE 9
Telephone Communication Via instrument cluster "Hang up" Dialling a number 1. "Telephone" 2. "Dial number" 3. Select the digits individually. 4. Via button on the steering wheel Select the symbol. The call is made using the mobile phone assigned to the telephone function. Press the button. Via instrument cluster "Accept" Rejecting a call Using iDrive "Reject" Via instrument cluster "Reject" If a call is to be made through the supplementary telephone: 1. Select the digits individually. 2.
PAGE 10
Communication Telephone Setting up a second call DTMF overlap dialling Set up another call during a call. Using DTMF overlap dialling to access network services or to control devices, for example re‐ mote answer phone access. This requires the DTMF code. 1. "Telephone" 2. "Active calls" 3. Dial a new phone number or select from a list. Switching between two calls, alternating 1. "Telephone" 2. Selecting a contact from a list or "Dial number". 3.
PAGE 11
Telephone Making a call The entries can be selected and a call set up. Symbol Meaning Contact with a stored number. Contact with more than one stored number. Call not possible, mobile phone with‐ out reception or network, Teleser‐ vice Call or data transfer active. Contact with a stored phone number: select de‐ sired entry. Contact with more than one stored phone num‐ ber: select desired entry and then phone num‐ ber. The call is made using the mobile phone as‐ signed to the telephone function.
PAGE 12
Communication Telephone Incoming calls From mobile phone to the hands-free system General Lists of incoming calls on the mobile phones as‐ signed the function telephone or supplementary telephone, are transferred to the vehicle. The last 20 incoming calls are displayed for each mobile phone. Dial number using iDrive 1. "Telephone" Calls that were started outside the Bluetooth range of the vehicle can be continued via the hands-free system when the ignition is switched on.
PAGE 13
Telephone Installed position In the front centre armrest. The direction of in‐ stallation in the centre armrest varies from vehi‐ cle to vehicle. Communication nections, arrow 1, and push down, arrow 2, until it engages. Inserting the snap-in adapter 1. Press the button and take out the cover. Removing the mobile phone 2. Insert snap-in adapter at the front, arrow 1, and press to the bottom, arrow 2, until the adapter engages. Press the button and pick up the mobile phone.
PAGE 14
Communication Office Office Vehicle Equipment Operating requirements This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems. ▷ Office is activated, see page 79.
PAGE 15
Office 3. Select the desired entry to display details. Communication Compose message and send 1. "Office" 2. "New element" Compose a new message 3. "Type" Principle ▷ "Text message" A spoken message is detected by voice recog‐ nition and converted to text. This can be correc‐ ted and added to as needed. The message can be sent as an SMS or E-mail. ▷ "E-mail" SMS messages and E-mails stored on the mo‐ bile phone can also be sent. ▷ "Voice memo" ▷ "E-mail with voice memo" 4.
PAGE 16
Communication Office Finish recording. 6. After the recording has been made, the text can be corrected. Select "Correct" and function: ▷ "Delete" Delete selected word. ▷ "Spell" The selected word is corrected using the spell-checker. also be transferred from both connected mo‐ biles. 1. Call up "Options". 2. Select mobile from which the contacts are to be transferred. A symbol indicates the storage location of the contacts: Symbol Storage location Vehicle.
PAGE 17
Office Edit 1. Select the desired contact. Communication Display the Internet address of a contact The Internet address stored for a contact can be called up. 2. "Edit contact" 1. Select the desired contact. 2. Select Internet address. The selected Internet address is displayed in the browser. Displaying additional information from BMW Online Display of additional information for a contact if present at BMW Online. 3. Change entries. 4. "Save contact in veh.
PAGE 18
Communication Symbol Office Display contact images Meaning Work phone number Photos saved for contacts are saved in the ve‐ hicle when the mobile phone is connected to the vehicle. Mobile phone number 1. "Settings" Private phone number Other phone number Private address 2. "Connections" 3. "Bluetooth" 4. Call up "Options". Work address 5. "Configure Bluetooth" E-mail address 6. "Show pictures" Internet address Displaying all contact images is activated or de‐ activated.
PAGE 19
Office The latest messages are shown. It can be selected whether the messages are to be transferred from a mobile. The messages can also be transferred from both connected mo‐ biles. If a mobile phone is assigned to more than one e-mail account, the desired e-mail account must be selected. Communication Only E-mails from the mobile phone are displayed. ▷ "Text message" Only SMS messages are displayed. ▷ "Service messages" Only service messages are displayed. Select message status. ▷ "Unread messages" 1.
PAGE 20
Communication Symbol Office Function Symbol Function Browse in the SMS "Sender/recipient" "Play", see page 99. Contact data are shown "Call sender" "Use contact data", see page 98. "Use contact data", see page 98. "Reply" Select between: "Reply" "Reply" Select between: "Reply to all" "Reply" "Forward" "Forward" Send e-mail, see page 89. Send SMS, see page 89.
PAGE 21
Office Symbol Function Communication Symbol Function "Select phone number" "Open link in browser" Select the desired number from the list if the message contains more than one number. Telephone con‐ nection is set up. Call up Internet address. "Further information" Display additional information "Send e-mail (BMW Online)" "Open link in browser" Calendar Message from information service Principle General The last 30 days and the next 90 days can be displayed.
PAGE 22
Communication Office 2. Select desired day. The appointments of the selected day are shown. Appointment 2. Select mobile phone from which the tasks are to be transferred. Sort task list 1. Select headers in the task list. Displays 2. Select sort criterion: Select the desired appointment. ▷ "Priority (!)" ▷ "Subject" ▷ "Due date" Additional functions The following functions are available for the ap‐ pointment entry selected: Symbol Function Display task Select the desired task.
PAGE 23
Office It can be selected whether the notes are to be transferred from a mobile. The notes can also be transferred from both connected mobiles. ▷ "To beginning" 1. Call up "Options". ▷ "Fast reverse" 2. Select mobile phone from which the memos are to be transferred. ▷ "Fast forward" Text memos The recording cannot be continued after starting playback. ▷ "Delete" ▷ "OK" Finish recording. Show text memos Select desired text memo.
PAGE 24
Communication Office ▷ File systems: current file systems for USB devices are supported. FAT 32 format is recommended. 2. Select mobile phone from which the remind‐ ers are to be transferred. 1. Connect USB medium to the USB interface in the centre armrest, see page 57. Activate/deactivate pop-up reminder 2. "Office" 2. Call up "Options". 3. "Notes/voice memos" 3. "Reminder pop-up" 1. "Office" 4. Highlight desired voice memo.
PAGE 25
Office Reading out General SMS, E-mails, appointments, tasks, memos and voice memos can be read out or played back. Reading out 1. Select desired element. 2. "Read out" The following possibilities are available when reading out or playing back: ▷ "Pause" Interrupt reading out. Select again to restart reading out. ▷ "To beginning" Read out again from the beginning. ▷ "Next paragraph" Skip paragraph.