E5P00UD_01UD_EN.book Page 1 Wednesday, July 22, 2009 1:56 PM Owner’s Manual INTRODUCTION CONNECTIONS NB500MG1F Blu-ray Disc Player PLAYBACK OTHERS © 2009 Funai Electric Co., Ltd. FUNCTION SETUP Read your Owner’s Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read assistance, you may access our online help at http://www.funai-corp.
3. Prepare 1 After all the connections are complete, connect the AC power cord. , 9 4. Play 1 Press [OPEN/CLOSE 2 Place the disc on the disc tray with its label side facing up. ] to open the disc tray. 02 #2 ($-)/54 0" #" #/!8)!, $)')4!, /54 0#- ")4342%!- 2 !5$)/ /54 6)$%/ /54 #/-0/.%.4 6)$%/ /54 to AC outlet 2 Insert two Size AAA (R03) batteries. Align the disc to the disc tray guide. 3 Press [OPEN/CLOSE ] to close the disc tray. It may take a while to load the disc.
1. Select Best the appropriate connection Supports up to 1080i / 1080p, 1080p24 resolution. 2. Connect HDMI Cable Your TV Your TV Video Audio HDMI cable HDMI IN 9 , 02 #2 ($-)/54 High Definition TV 0" #" #/!8)!, 2 $)')4!, /54 0#- ")4342%!- !5$)/ /54 #/-0/.%.4 6)$%/ /54 6)$%/ /54 HDMI cable sends both audio and video digital signals. (No additional audio connection is required.
E5P00UD_01UD_EN.book Page 2 Wednesday, July 22, 2009 1:56 PM INTRODUCTION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
E5P00UD_01UD_EN.book Page 3 Wednesday, July 22, 2009 1:56 PM INTRODUCTION CONNECTIONS LASER SAFETY This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury. CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION: Visible and invisible laser radiation when open and inter lock defeated. Do not stare into beam.
E5P00UD_01UD_EN.book Page 4 Wednesday, July 22, 2009 1:56 PM INTRODUCTION Contents INTRODUCTION Safety Instructions ........................................................................2 Supplied Accessories ...................................................................5 Trademark Information ...............................................................5 Features ............................................................................................6 Symbols Used in this Manual .............
E5P00UD_01UD_EN.book Page 5 Wednesday, July 22, 2009 1:56 PM INTRODUCTION INTRODUCTION Supplied Accessories Owner’s Manual RCA audio / video cables (WPZ0102TM018 / WPZ0102LTE01) owner’s manual (EN/ES) (1VMN27793 / 1VMN27794) CONNECTIONS remote control with batteries (AAAx2) (NB950UD/NB900UD) quick start guide (EN/ES) (1VMN27796 / 1VMN27797) Trademark Information “Blu-ray Disc” and Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc.
E5P00UD_01UD_EN.book Page 6 Wednesday, July 22, 2009 1:56 PM INTRODUCTION Features Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more trueto-life picture. Upconvert DVD for enhanced picture quality Your current DVD will look even better than before thanks to video upconversion.
E5P00UD_01UD_EN.book Page 7 Wednesday, July 22, 2009 1:56 PM INTRODUCTION INTRODUCTION Front Panel 1 2* 3 4 DISC IN 6* 7 STOP 8 9 PLAY CONNECTIONS OPEN/ CLOSE 5 STANDBY-ON SD card 10 7. PLAY indicator • This indicator lights up in green when discs or SD card play back. 8. STANDBY-ON indicator • This indicator lights up in red when the power is in the standby mode. 9. Q STANDBY-ON button • Press to turn on the unit, or to turn the unit into the standby mode.
E5P00UD_01UD_EN.book Page 8 Wednesday, July 22, 2009 1:56 PM INTRODUCTION Remote Control 1 13* 2 3 14 4 15 5 16 6 17 8 9 18 19 20 7* 10 21 11 12 22 23 24 25 (*) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON Q button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 2. RED / GREEN / BLUE / YELLOW button • Press to select items on some BD menus.
E5P00UD_01UD_EN.book Page 9 Wednesday, July 22, 2009 1:56 PM INTRODUCTION 1) Open the cover. 1 DISC IN STOP PLAY STANDBY-ON SD card 30˚ 16 feet (5 m) 23 feet (7 m) 30˚ 16 feet (5 m) FUNCTION SETUP OPEN/ CLOSE Line of sight: Either side of t Above: Below: PLAYBACK 2) Insert batteries. CONNECTIONS 2 Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
E5P00UD_01UD_EN.book Page 10 Wednesday, July 22, 2009 1:56 PM CONNECTIONS Connection to the TV 1 Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the next page. Best (Supports up to 1080i / 1080p, 1080p24 resolution.) Your TV Video Audio HDMI cable HDMI IN High Definition TV Go To A No analog audio connection required. No supplied cables are used in this connection: Please purchase the necessary cables at your local store.
E5P00UD_01UD_EN.book Page 11 Wednesday, July 22, 2009 1:56 PM CONNECTIONS Connect the cables by following the descriptions below. HDMI Video / Audio Connection 9 , Your TV CONNECTIONS A INTRODUCTION 2 02 #2 ($-)/54 0" #" #/!8)!, 2 $)')4!, /54 0#- ")4342%!- !5$)/ /54 6)$%/ /54 #/-0/.%.4 6)$%/ /54 HDMI IN HDMI cable PLAYBACK Note • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
E5P00UD_01UD_EN.book Page 12 Wednesday, July 22, 2009 1:56 PM CONNECTIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
E5P00UD_01UD_EN.book Page 13 Wednesday, July 22, 2009 1:56 PM CONNECTIONS Finding the Video Channel on Your TV After you have made all the necessary connections, press [STANDBY-ON Q] to turn on the unit. 2 3 Turn on your TV. CONNECTIONS 1 INTRODUCTION After you have completed all the connections, you must find the correct video channel (external input channel) on your TV. PLAYBACK Press the button on the TV’s remote control that accesses the external input channel.
E5P00UD_01UD_EN.book Page 14 Wednesday, July 22, 2009 1:56 PM PLAYBACK Information on Playback Before you start playing back a disc, read the following information. Readable cards Playable Discs and Files This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back.
E5P00UD_01UD_EN.book Page 15 Wednesday, July 22, 2009 1:56 PM PLAYBACK On-Screen Display You can check information about the current disc by pressing [DISPLAY].
E5P00UD_01UD_EN.
E5P00UD_01UD_EN.book Page 17 Wednesday, July 22, 2009 1:56 PM PLAYBACK Use [K / L] to select “SD Card”, then press [OK]. Press [OPEN/CLOSE A] to open the disc tray. Media Select Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. Disc SD Card Use [K / L] to select a desired track, folder or file, then press [OK]. Use [s / B] to go back and forward between the hierarchies. • If you press [OK] on the desired file, playback will start.
E5P00UD_01UD_EN.book Page 18 Wednesday, July 22, 2009 1:56 PM PLAYBACK “Media Select” is available only when an SD Memory Card is Selecting the Media Mode For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted. 1 2 In stop mode, press [SETUP]. Use [K / L] to select [OK] .
E5P00UD_01UD_EN.book Page 19 Wednesday, July 22, 2009 1:56 PM PLAYBACK INTRODUCTION Playing Back (BD / DVD) Press [STANDBY-ON Q]. Turn on the TV and select the appropriate input on the TV to which the unit is connected. Insert a disc (refer to page 17 on how to insert a disc). CONNECTIONS Playback may start automatically. If not, press [B (play)]. Some discs may show a title or a disc menu. In such case, refer to “Using the Title / Disc / Pop-up Menu” on page 20.
E5P00UD_01UD_EN.book Page 20 Wednesday, July 22, 2009 1:56 PM PLAYBACK Using the Title / Disc / Pop-up Menu Many of BD-video and DVD-video discs contain title menu (BD-video / DVD-video), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Title menu (BD-video / DVD-video) Playing Back (Audio CD / JPEG Files) Before you begin, make sure the correct media mode is selected.
E5P00UD_01UD_EN.book Page 21 Wednesday, July 22, 2009 1:56 PM PLAYBACK 2 3 4 File information Current page / Total page number Operation guide: Press [BLUE] to go to the previous page. Press [YELLOW] to go to the next page. Playback status 2 • Do not delete the folders or files in the SD Memory Card with your computer. This unit may not read the SD Memory Cards formatted on a computer. TR 4 - - / 16 To return to the file played last: Press [POP MENU / MENU].
E5P00UD_01UD_EN.book Page 22 Wednesday, July 22, 2009 1:56 PM PLAYBACK Fast Forward / Fast Reverse 1 During playback, press [D (forward)] Step by Step Playback 1 In pause mode, press [F (pause)] repeatedly. repeatedly for fast forward. During playback, press [E (reverse)] repeatedly for fast reverse. Every time you press [D (forward)] or [E (reverse)], the playback speed will change. 2 Press [B (play)] to return to normal playback. Note • For BD, the approximate speed for the fast forward is 1 (1.
E5P00UD_01UD_EN.book Page 23 Wednesday, July 22, 2009 1:56 PM PLAYBACK Before you begin • The program playback will start. 2 / 16 You can play back the disc/card in your desired order. 3 4 5 6 - - / 16 Total Page Down 0 : 26 : 24 1:14 0:50 1:14 0:50 0:53 0:54 0:36 Page Prev Page Down To exit from the program playback mode: • Press [RETURN] in stop mode. Note 7 Page Next 8 2 3 5 6 7 8 : : : : Track information File information “CD-DA” will be displayed.
E5P00UD_01UD_EN.book Page 24 Wednesday, July 22, 2009 1:56 PM PLAYBACK Random Playback Rapid Playback This function shuffles the playback order of tracks / files. 1 In stop mode, press [MODE] twice. 1 2 3 4 5 6 1 During playback, press [MODE] repeatedly - - / 16 Random CD_DA 1 2 3 4 5 6 7 Total 0:36 1:14 0:45 0:50 0:53 0:20 0:54 Off 2 Press [OK] or [s / B] to switch e.g.) audio CD 2 3 4 5 6 until the Rapid playback setting appears.
E5P00UD_01UD_EN.book Page 25 Wednesday, July 22, 2009 1:56 PM PLAYBACK Reduces the noise of the playback picture. PIP (BONUSVIEW) Setting Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video. 3 Press [RETURN] to exit. CONNECTIONS “Off” : Shows the original picture as recorded.
E5P00UD_01UD_EN.book Page 26 Wednesday, July 22, 2009 1:56 PM PLAYBACK Using [Number buttons] (Direct Search) Search Title Search Using [H / G (skip)] 1 During playback, press [G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press [H (skip)] to go back to the previous file.
E5P00UD_01UD_EN.book Page 27 Wednesday, July 22, 2009 1:56 PM PLAYBACK Switching Subtitles Switching Audio Soundtrack Some BD and DVD contain multiple audio streams. Those are often in different audio languages or audio formats. For BD, available audio varies depending on “BD Audio Mode” setting. Refer to page 34 for more information. 1 During playback, press [SUBTITLE]. 2 Use [K / L] to “Primary Subtitle”, “Secondary 1 During playback, press [AUDIO].
E5P00UD_01UD_EN.book Page 28 Wednesday, July 22, 2009 1:56 PM PLAYBACK Note • The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”. (For some BD, secondary audio will be output even when secondary video is off.) • The sound mode cannot be changed during playback of discs not recorded in multiple audio. • Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the discs.
E5P00UD_01UD_EN.book Page 29 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time. CONNECTIONS Quick “ “ Quick” menu contains setting items extracted from Custom” menu which may be used frequently. In stop mode, press [SETUP]. Use [K / L] to select [OK].
E5P00UD_01UD_EN.book Page 30 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP Custom “ Custom” menu contains all the setting items. 1 2 3 In stop mode, press [SETUP]. Use [K / L] to select [OK]. , then press Use [K / L] to select your desired setting category, then press [OK]. : Language : Video : Audio : Parental : Others • For “Parental” menu, follow the procedure on page 39. 4 5 Use [K / L] to select your desired setting items. Follow the procedure below depending on the setting items.
E5P00UD_01UD_EN.book Page 31 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S INTRODUCTION Language Language Original Subtitle Off Disc Menu English Player Menu English CONNECTIONS Audio Setting items Audio Sets the language for audio. Disc Menu Sets the language for disc menu or pop-up menu. Auto(XXXX)*1 / English* / Français / Español OTHERS Player Menu Sets the language for OSD (on-screen display).
E5P00UD_01UD_EN.book Page 32 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S Video Video TV Aspect 16:9 Wide HDMI Video Resolution Auto HDMI Deep Color Auto Component Output 480i Progressive Mode Auto Still Mode Auto • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Setting items TV Aspect Sets the picture size according to aspect ratio of the connected TV.
E5P00UD_01UD_EN.book Page 33 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP 33 OTHERS EN FUNCTION SETUP • Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output. • Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode. • You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.
E5P00UD_01UD_EN.book Page 34 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S Audio Audio BD Audio Mode Mix Audio Output HDMI Audio Out HDMI Multi(Normal) Down Sampling On DRC Off • To select the setting items and options, refer to “ Custom” on page 30.
E5P00UD_01UD_EN.book Page 35 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 34. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited to your connected device.
E5P00UD_01UD_EN.book Page 36 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP Digital Out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting. Quick A HDMI Audio Out A Audio Mute A Digital Out Bitstream* : When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
E5P00UD_01UD_EN.book Page 37 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP INTRODUCTION Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack) This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table.
E5P00UD_01UD_EN.book Page 38 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP Menu Channel Level Tests or sets the volume for each speaker. Setting items Test Tone: “Test Tone” is the test tone which can be output from the speakers so you can adjust the volume for each speaker. Front Lch Center Subwoofer Front Rch Surround Rch Surround Back Rch Surround Back Lch Surround Lch Options Off* Manual Auto Descriptions Select “Off” to deactivate “Test Tone”.
E5P00UD_01UD_EN.book Page 39 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S INTRODUCTION Parental For the first time use Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.
E5P00UD_01UD_EN.book Page 40 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S Others Others Angle Icon On Auto Power Off On HDMI CEC Off Media Select Disc Software Update • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Setting items Options On*: The angle icon appears on the TV screen when playing back the scene with various angle.
E5P00UD_01UD_EN.book Page 41 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard. This function may not work properly depending on a device to be connected. When “HDMI CEC” setting is set to “On”, functions listed below will be available. FUNCTION SETUP S Current Version You can confirm the current software version. 1 Use [K / L] to select , then press [OK]. 2 Use [K / L] to select “Software Update”, then press [OK].
E5P00UD_01UD_EN.book Page 42 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP S Software Update This unit lets you update the firmware yourself using a firmware update disc. To update the firmware, you must first download the latest firmware to a disc, then execute “Software Update”. 1 Prepare a firmware update disc: Please access www.magnavox.com, and download the latest firmware to a blank disc by following the direction described on the site. • Use a blank disc and download one firmware per disc.
E5P00UD_01UD_EN.book Page 43 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP INTRODUCTION 7 Use [s / B] to select “Yes”, then press [OK]. • Loading of the firmware will start. Software Update Current Version : 1.000 Insert Version : 1.001 The indicators blinks for this procedure. 1. Start Select ‘Yes’ and press ‘OK’ button to start updating. Press ‘No’ to exit software update. PLAY CONNECTIONS DISC IN STANDBY-ON No Yes Software Update 2. Loading / Updating 2. Updating 1.
E5P00UD_01UD_EN.book Page 44 Wednesday, July 22, 2009 1:56 PM FUNCTION SETUP Initialize Initialize the setting or SD Memory Card. 1 2 3 In stop mode, press [SETUP]. Use [K / L] to select [OK]. , then press Use [K / L] to select a desired option, then press [OK]. “Setup”: Resets the setup menu to the default. “Format SD Card” (Available only when an SD Memory Card is inserted.): Initializes the SD Memory Card. After confirmation message appears, use [K / L] to select “Yes”, then press [OK].
E5P00UD_01UD_EN.book Page 45 Wednesday, July 22, 2009 1:56 PM OTHERS If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.
E5P00UD_01UD_EN.book Page 46 Wednesday, July 22, 2009 1:56 PM OTHERS Glossary Analog Audio Dolby TrueHD An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Dolby TrueHD is a lossless coding technology developed for next generation optical discs. Blu-ray Disc supports 7.1 multi-channel surround sound output.
E5P00UD_01UD_EN.
E5P00UD_01UD_EN.book Page 48 Wednesday, July 22, 2009 1:56 PM OTHERS Signal system Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity General NTSC color 120 V AC, 60 Hz 20 W (standby: 0.5 W) 14-3/16 x 2 x 8-16/8 inches (360 x 50 x 215mm) 4.2 lbs. (1.
E5P00UD_01UD_EN.book Page 49 Wednesday, July 22, 2009 1:56 PM OTHERS EN 49 OTHERS Cleaning the disc lens • If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.
E5P00UD_01UD_EN.
E5P00UD_01UD_EN.
E5P00UD_01UD_EN.book Page 48 Wednesday, July 22, 2009 1:56 PM LIMITED WARRANTY LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
E5P00UD_01UD_ES.book Page 1 Wednesday, July 22, 2009 1:59 PM Manual del Usuario INTRODUCCIÓN CONEXIONES NB500MG1F Reproductor de Discos Blu-ray REPRODUCCIÓN OTROS © 2009 Funai Electric Co., Ltd. CONFIGURACIÓN DE FUNCIONES Read your Owner’s Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read assistance, you may access our online help at http://www.funai-corp.
3. Preparar 1 Una vez que se completan todas las conexiones, conecte el cable de alimentación CA. 4. Reproducir 1 Pulse [OPEN/CLOSE bandeja de discos. 2 Sitúe el disco en la bandeja para discos con la etiqueta hacia arriba. ] para cerrar la a la salida del CA 2 Inserte dos baterías AAA (R03). Alinee el disco con la guía de la bandeja de discos. 3 Pulse [OPEN/CLOSE bandeja de discos. ] para cerrar la Puede que tarde un poco en cargar el disco. 3 Pulse [STANDBY-ON la unidad.
1. Seleccione la conexión adecuada Lo mejor Admite hasta 1080i / 1080p, 1080p24 de resolución. 2. Conectar Cable HDMI Su TV Su TV Video Audio Cable HDMI HDMI IN Televisión de alta definición El cable HDMI envía señales digitales de audio y vídeo. (No se requiere ninguna conexión de audio adicional.) HDMI IN Cable HDMI No incline el conector al insertarlo en el toma del HDMI y cerciórese de que coincidan las formas del toma con las del conector.
E5P00UD_01UD_ES.book Page 2 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN Instrucciones de Seguridad El modelo y el número de serie de esta unidad se pueden encontrar en la caja. Deberá anotar y guardar el modelo y el número de serie para consultarlos, si los necesita, en el futuro. Número de modelo: Número de serie: ADVERTENCIA: PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD.
E5P00UD_01UD_ES.book Page 3 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN CONEXIONES SEGURIDAD DEL LÁSER Este aparato usa un láser. Para evitar posibles daños personales, solamente el personal de mantenimiento cualificado debe quitar la tapa o reparar este aparato. PRECAUCIÓN: El uso de controles, ajustes o procedimientos diferentes de los especificados en este manualpuede producir una exposición peligrosa a la radiación.
E5P00UD_01UD_ES.book Page 4 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN Contenido INTRODUCCIÓN Instrucciones de Seguridad .......................................................2 Accesorios Provistos.....................................................................5 Información de Marca Registrada ...........................................5 Funciones.........................................................................................6 Símbolos Utilizados en Este Manual............................
E5P00UD_01UD_ES.book Page 5 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN INTRODUCCIÓN Accesorios Provistos Manual del Usuario RCA cables de sonido / vídeo (WPZ0102TM018/ WPZ0102LTE01) manual del usuario (EN/ES) (1VMN27793 / 1VMN27794) CONEXIONES Mando a distancia y baterías (AAAx2) (NB950UD/ NB900UD) guía de arranque rápido (EN/ES) (1VMN27796 / 1VMN27797) Información de Marca Registrada “BONUSVIEW” es una marca registrada de Blu-ray Disc Association.
E5P00UD_01UD_ES.book Page 6 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN Funciones Reproducción de vídeo de alta definición completa Ver películas con la mayor calidad de imagen disponible paraa su HDTV. Esta unidad ofrece reproducción de vídeo de alta definición de una resolución de hasta 1080p para obtener una apasioannte experiencia de visionado. Una imagen con gran detalle y una nitidez aumentada oferce una imagen más realista.
E5P00UD_01UD_ES.book Page 7 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN INTRODUCCIÓN Panel Delantero 1 2* 3 4 DISC IN 6* 7 STOP 8 9 PLAY CONEXIONES OPEN/ CLOSE 5 STANDBY-ON SD card 7. Indicador del PLAY • El indicador se prende de color verde cuando se reproducen tarjetas SD o discos. 8. Indicador STANDBY-ON • El indicador se prende de color rojo cuando la alimentación está en modo de espera. 9.
E5P00UD_01UD_ES.book Page 8 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN Mando a Distancia 1 13* 2 7* 3 14 4 15 5 16 6 17 8 9 18 19 20 10 21 11 12 22 23 24 25 (*) La unidad también se puede encender pulsando estos botones. 1. Botón STANDBY-ON Q • Pulse esta tecla para encender la unidad o para dejarla en el modo de espera. (Para apagar completamente la unidad, debe desconectar el cable de alimentación de CA.) 2.
E5P00UD_01UD_ES.book Page 9 Wednesday, July 22, 2009 1:59 PM INTRODUCCIÓN 1) Abra la tapa. 1 DISC IN STOP PLAY STANDBY-ON SD card 16 pies (5 m) 30˚ 30˚ 23 pies (7 m) 16 pies (5 m) OTROS Compruebe que hace coincidir las marcas + y - de las pilas con las marcas indicadas en el compartimento de las pilas. 3) Cierre la tapa. 1 2 Nota El uso incorrecto de pilas puede tener como resultado peligros como fugas y explosiones. Por favor, observe los siguiente: • No mezcle pilas nuevas con antiguas.
E5P00UD_01UD_ES.book Page 10 Wednesday, July 22, 2009 1:59 PM CONEXIONES Conexión al Televisor 1 Seleccione la conexión que corresponda y luego proceda conforme las instrucciones (A, B or C) de la página siguiente. Lo mejor (Admite hasta 1080i / 1080p, 1080p24 de resolución.) Su TV Vídeo Audio Cable HDMI HDMI IN Televisión de alta definición Ir a A No se requiere conexión de sonido analógico.
E5P00UD_01UD_ES.book Page 11 Wednesday, July 22, 2009 1:59 PM CONEXIONES INTRODUCCIÓN 2 Conecte los cables según las instrucciones que figuran a continuación. HDMI Conexión de sonido / vídeo 9 , CONEXIONES A Su TV 02 #2 ($-)/54 0" #" #/!8)!, 2 $)')4!, /54 0#- ")4342%!- !5$)/ /54 6)$%/ /54 #/-0/.%.
E5P00UD_01UD_ES.book Page 12 Wednesday, July 22, 2009 1:59 PM CONEXIONES Conexión a un Sistema de Sonido • Cuando cambie las conexiones, se deben apagar todos los dispositivos. • Consulte con el manual que acompaña a los dispositivos externos para ver más información.
E5P00UD_01UD_ES.book Page 13 Wednesday, July 22, 2009 1:59 PM CONEXIONES INTRODUCCIÓN Una vez finalizadas todas las conexiones, debe localizar el canal de vídeo correspondiente en su televisor (canal de entrada externa). Encontrar el Canal de Vídeo en su Televisor Una vez que haya realizado todas las conexiones correspondientes, pulse [STANDBY-ON Q] para encender la unidad. 2 3 Encienda su televisor.
E5P00UD_01UD_ES.book Page 14 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Información Acerca de la Reproducción Antes de que comience a reproducir un disco, lea la siguiente información. Discos y Archivos Reproducibles Este aparato es compatible con la reproducción de los siguientes discos / archivos. Para reproducir un disco / archivo, asegúrese de que cumple los requisitos de códigos de región y sistemas de colores descritos a continuación.
E5P00UD_01UD_ES.book Page 15 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Visualización en Pantalla BD-vídeo apagado A Información de título / capítulo A Información de título (tiempo transcurrido) A Información de título (tiempo restante) A Información relacionada con el formato de sonido A apagado DVD-vídeo El contenido de BD/DVD generalmente está dividido en títulos. Los títulos pueden a su vez ser subdivididos adicionalmente en capítulos.
E5P00UD_01UD_ES.
E5P00UD_01UD_ES.book Page 17 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Pulse [OPEN/CLOSE A] para abrir la bandeja para discos. Selección de medios Sitúe el disco en la bandeja para discos con la etiqueta hacia arriba. 3 • Asegúrese de que el disco sea compatible con esta unidad. (Consulte la página 14 para obtener la lista de discos compatibles.) • Si pulsa [OK] sobre el archivo deseado, comenzará la reproducción. Pulse [OPEN/CLOSE A] para cerrar la bandeja de discos.
E5P00UD_01UD_ES.book Page 18 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN “Selección de medios” Antes está de disponible come sólo nzar cuando si inserta una Seleccionar el Modo de Soporte Para el soporte de reproducción que leerá está unidad, debe seleccionarse el modo correcto de soporte. Puedes cambiar el modo de soporte siguiendo los pasos que figuran a continuación. “Selección de medios” está disponible sólo cuando si inserta una tarjeta de memoria SD. 1 2 En modo detención, pulse [SETUP].
E5P00UD_01UD_ES.book Page 19 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN INTRODUCCIÓN Reproducir (BD / DVD) Encienda el televisor y seleccione la entrada apropiada en el televisor al cual está conectada la unidad. Introduzca un disco (consulte la página 17 para conocer cómo insertar un disco). Es posible que la reproducción comience automáticamente. CONEXIONES REPRODUCCIÓN 1 2 3 4 Pulse [STANDBY-ON Q]. De lo contrario, pulse [B (reproducir)].
E5P00UD_01UD_ES.book Page 20 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Utilizar el Título / Disco / Menú Desplegable Muchos de los discos BD-vídeo y DVD-vídeo contienen menú de título (BD-vídeo / DVD-vídeo), menú de disco (DVD-vídeo) o menú desplegable (BD-vídeo) que lo guiará a través de las funciones disponibles en el disco. El contenido del menú puede diferir según los discos. Menú de título (BD-vídeo / DVD-vídeo) 1 Pulse [TOP MENU].
E5P00UD_01UD_ES.book Page 21 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN 1 2 3 4 Información acerca del archivo Página actual / Número total de páginas Guía de uso: Pulse [BLUE] para ir a la página anterior. Pulse [YELLOW] para ir a la página siguiente. Estado de reproducción Utilice [K / L / s / B] para seleccionar un archivo deseada a reproducir y después pulse [B (reproducir)] o [OK]. 3 Para retornar al primer elemento: Pulse [TOP MENU].
E5P00UD_01UD_ES.book Page 22 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Avance Rápido / Rebobinado Rápido 1 Durante la reproducción, pulse [D (adelantar)] 2 repetidamente para avance rápido. Durante la reproducción, pulse [E (reverso)] repetidamente para rebobinado rápido. Cada vez que pulse [D (adelantar)] o [E (reverso)], la velocidad de reproducción cambia. Pulse [B (reproducir)] para volver a la reproducción normal.
E5P00UD_01UD_ES.book Page 23 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN INTRODUCCIÓN 3 Pulse [B (reproducir)] para comenzar la Reproducción de Programa reproducción del programa. • Comenzara la reproducción de programa. Puede reproducir el disco / tarjeta en el orden que desee. 2 / 16 1 En modo detención, pulse [MODE]. 2 Utilice [K / L] para seleccionar una pista / 2 3 4 5 6 - - / 16 Programa CD_DA 2 4 9 11 12 14 8 Abajo 1:14 0:50 1:14 0:50 0:53 0:54 0:36 Pág. Ant.
E5P00UD_01UD_ES.book Page 24 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Reproducción Aleatoria Reproducción Rápida Esta función desordena el orden de reproducción de las pistas / archivos. 1 En modo parado, pulse [MODE] dos veces. 1 2 3 4 5 6 1 Durante la reproducción, pulse [MODE] - - / 16 Aleatorio CD_DA 1 2 3 4 5 6 7 1 : 13 : 29 Total 0:36 1:14 0:45 0:50 0:53 0:20 0:54 2 Pulse [OK] o [s / B] para alternar Ej.
E5P00UD_01UD_ES.book Page 25 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN PIP (BONUSVIEW) Configuración Reduce el ruido de la imagen de reproducción. Algunos BD-vídeo tienen PIP (imagen en imagen) que le permite mostar la imagen secundaria en la imagen primaria. Puede llamar a la imagen secundaria pulsando [MODE] siempre que la escena contenga la imagen secundaria. 3 Pulse [RETURN] para salir.
E5P00UD_01UD_ES.book Page 26 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Utilizando [botones numéricos] (Búsqueda directa) Búsqueda Utilizar [H / G(saltar)] Búsqueda por título 1 Durante la reproducción, pulse [G (saltar)] para saltar a la siguiente pista / título / capítulo o archivo. Púlselo repetidamente para saltarse pistas siguientes. Pulse [H (saltar)] para regresar al inicio de la pista actual. Púlselo repetidamente para ir a las pistas anteriores.
E5P00UD_01UD_ES.book Page 27 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Alternar Subtítulos Cambiar la Banda Sonora de Sonido Ciertos discos BD y DVD contienen múltiples corrientes de sonido. Con frecuencia son distintos idiomas de sonido o formatos de sonido. Para BD, el sonido disponible depende de la opción “Modo de audio BD”. Consulte página 34 para mayor información. 1 Durante la reproducción, pulse [SUBTITLE].
E5P00UD_01UD_ES.book Page 28 Wednesday, July 22, 2009 1:59 PM REPRODUCCIÓN Nota • El audio secundario no se enviará a la salida cuando el vídeo secundario no se muestre o cuando “Modo de audio BD” se establezca en “Salida de audio HD”. (Para ciertos BD, el sonido secundario se dará como salida incluso cuando la imagen secundaria esté desactivada). • El modo de sonido no se puede cambiar durante la reproducción de discos que no se hayan grabado en sonido múltiple.
E5P00UD_01UD_ES.book Page 29 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES En el menú configuración, usted puede cambiar la configuración de sonido, imagen, idioma, etc. No puede cambiar la configuración durante la reproducción. Los elementos de configuración que se visualizan en color gris indican que no están disponibles en ese momento. El menú “ Rápido” contiene opciones de configuración extraídas del menú “ Persnaliz.” que pueden utilizarse con frecuencia.
E5P00UD_01UD_ES.book Page 30 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Persnaliz. El menú “ Persnaliz.” contiene todas las opciones de configuración. 1 2 3 En modo detención, pulse [SETUP]. Utilice [K / L] para seleccionar después pulse [OK]. y Utilice [K / L] para seleccionar la categoría deseada y después pulse [OK]. : Idioma : Vídeo : Audio : Paterno : Otros • Para el menú “Paterno”, siga el procedimiento que figura en página 39.
E5P00UD_01UD_ES.book Page 31 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES S INTRODUCCIÓN Idioma Idioma Original Subtítulo Apdo. Menú de Disco Inglés Menú Reproduc. Español CONEXIONES Audio Opciones de configuración Audio Configura el idioma de sonido. Auto(XXXX)*1 / English* / Français / Español OTROS Menú de Disco Configura el idioma del menú del disco o del menú desplegable. Menú Reproduc. Configurar idioma para la visualización en pantalla.
E5P00UD_01UD_ES.book Page 32 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES S Vídeo Video Aspecto de TV 16:9 Wide Resolución de video HDMI Auto HDMI Deep Color Auto Salida de componentes 480i Modo Progresivo Auto Modo Vista fija Auto • Para ver cómo seleccionar los elementos y opciones, consulte “ Persnaliz.” en página 30. • El menú “ Rápido” consta de menús de configuración que se utilizan con frecuencia y se acompañan de la marca .
E5P00UD_01UD_ES.book Page 33 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES OTROS ES CONFIGURACIÓN DE FUNCIONES • Aún si establece el parámetro “Resolución de video HDMI” en “Auto”, cuando la unidad se conecta a dispositivos compatibles con DVI mediante un cable HDMI-DVI, el resultado será la salida de una señal 480p. • Las señales de vídeo y sonido pueden distorsionarse temporalmente al cambiar del / al modo de salida HDMI.
E5P00UD_01UD_ES.book Page 34 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES S Audio Audio Modo de audio BD Salida audio comb. Salida audio HDMI Mult. HDMI (Normal) Sub Muestreo Enc. DRC Apdo. • Para ver cómo seleccionar los elementos y opciones, consulte “ Persnaliz.” en página 30.
E5P00UD_01UD_ES.book Page 35 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES INTRODUCCIÓN Configuración de salida audio HDMI Cuando utilice conexiones HDMI haga la configuración de “Salida audio HDMI” del menú “Audio” del menú de configuración según las especificaciones del dispositivo o monitor a conectar. Consulte la página 34. En general, se recomienda establecer “Mult.
E5P00UD_01UD_ES.book Page 36 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Configuración de salida digital Cuando se selecciona “Audio desactivado” en la in “Salida audio HDMI”, la señal de sonido HDMI se silenciará y las señales de sonido que se da como salida desde la toma DIGITAL OUT cambia dependiendo de la opción “Salida digital”.
E5P00UD_01UD_ES.book Page 37 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Esta unidad le permite disfrutar de sonido envolvente multicanal como el envolvente 7.1 / 5.1 c. Para aprovechar lo máximo de esta función, configure sus altavoces correctamente consultando la tabla a continuación. Cómo navegar por la configuración de “Mult.
E5P00UD_01UD_ES.book Page 38 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Menu Nivel Canales Prueba o configura el volumen de cada altavoz. Opciones de configuración Tono Prueba: “Tono Prueba” es el tono de prueba que se puede dar como salida desde los altavoces para que pueda ajustar el volumen de cada altavoz.
E5P00UD_01UD_ES.book Page 39 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Paterno El control de calificaciones le permite establecer un límite que evite que sus hijos vean materiales inapropiados. La reproducción se detendrá si la calificación excede los niveles que usted ha configurado y requerirá que introduzca una contraseña antes de que el disco se reproduzca. INTRODUCCIÓN S Para el uso por primera vez Paterno Todo Nivel clasific. DVD Todo CONEXIONES Nivel clasific. BD Camb.
E5P00UD_01UD_ES.book Page 40 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES S Otros Otros Icono de Ángulo Enc. Auto Apagato Enc. HDMI CEC Apdo. Selección de medios Disco Actualización Software • Para ver cómo seleccionar los elementos y opciones, consulte “ Persnaliz.” en página 30. • El menú “ Rápido” consta de menús de configuración que se utilizan con frecuencia y se acompañan de la marca . Opciones de configuración Opciones Icono de Ángulo Enc.
E5P00UD_01UD_ES.book Page 41 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES HDMI CEC permite el control del sistema integrado de HDMI y forma parte del HDMI estándar. Esta función puede no funcionar correctamente, esto depende del dispositivo que se conectará. Cuando el parámetro “HDMI CEC” se configura para “Enc.”, se visualizarán las funciones que figuran a continuación.
E5P00UD_01UD_ES.book Page 42 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES S Actualización Software Este dispositivo permite actualizar las versiones de firmware mediante el uso de un disco para actualizar firmware. A fin de actualizar el firmware, primero necesita descargar en un disco la última versión de firmware y luego ejecutar “Actualización Software”. 1 Prepare un disco para actualizar el firmware: Visite www.magnavox.
E5P00UD_01UD_ES.book Page 43 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES INTRODUCCIÓN 7 Utilice [s / B] para seleccionar “Sí” y después pulse [OK]. • Se iniciará la carga de firmware. Actualización Software Versión Actual : 1.000 Insertar Versión : 1.001 Los indicadores parpadean para este procedimiento. 1. Inicio Seleccione ‘Sí’ y pulse el botón ‘OK’ para iniciar la actualización. PLAY STANDBY-ON No Sí Actualización Software 1.
E5P00UD_01UD_ES.book Page 44 Wednesday, July 22, 2009 1:59 PM CONFIGURACIÓN DE FUNCIONES Inicializar Inicializar la configuración o tarjeta de memoria SD. 1 2 3 En modo detención, pulse [SETUP]. Utilice [K / L] para seleccionar después pulse [OK]. y Utilice [K / L] para seleccionar una opción deseada y después pulse [OK]. “Instalación”: Reconfigura el menú de configuración al predeterminado de fábrica.
E5P00UD_01UD_ES.book Page 45 Wednesday, July 22, 2009 1:59 PM OTROS Si la unidad no funciona correctamente cuando se hace funcionar según este manual, compruebe la unidad consultando la siguiente lista de comprobación.
E5P00UD_01UD_ES.book Page 46 Wednesday, July 22, 2009 1:59 PM OTROS Glosario Audio analógico Dolby TrueHD Una señal eléctrica que representa directamente al sonido. Compare esto con el audio digital que puede ser también una señal eléctrica, pero es una representación indirecta del sonido. Consulte también “Audio digital”. Dolby Dolby TrueHD es una tecnología de codificación sin pérdidas desarrollada para discos ópticos de la siguiente generación.
E5P00UD_01UD_ES.
E5P00UD_01UD_ES.book Page 48 Wednesday, July 22, 2009 1:59 PM OTROS Trasero Sistema de señales Requisitos de alimentación Consumo de alimentación Dimensiones (anchura x altura x profundidad) Peso Temperatura de funcionamiento Humedad de funcionamiento Generales Color NTSC 120 V CA, 60 Hz 20 W (espera: 0,5 W) 14-3/16 x 2 x 8-16/8 pulgadas (360 x 50 x 215 mm) 4,2 libras.
E5P00UD_01UD_ES.book Page 49 Wednesday, July 22, 2009 1:59 PM OTROS ES • Con una cámara digital (incluidas las cámaras incorporadas en teléfonos móviles): Apunte con la cámara digital hacia el mando a distancia. Presione cualquier botón del mando a distancia y mire en el visor de la cámara digital. Si la luz infrarroja aparece en la cámara, el mando a distancia funciona.
E5P00UD_01UD_ES.
E5P00UD_01UD_ES.
E5P00UD_01UD_ES.book Page 48 Wednesday, July 22, 2009 1:59 PM GARANTÍA LIMITADA GARANTÍA LIMITADA FUNAI CORP. reparará este producto, de forma gratuita en Estados Unidos, en caso de defecto de materiales o fabricación, del modo siguiente: DURACIÓN: FUNAI CORP. suministrará piezas de repuesto de las piezas defectuosas de forma gratuita durante un (1) año desde la fecha de compra minorista original. Ciertas piezas están excluidas de esta garantía. MANO DE OBRA: FUNAI CORP.