IMPORTANT: Please read this manual before using the unit to ensure safe and proper use. The unit will generate the magnetic/electric field; never place any medical equipment; watches; credit card; magnetic record card or any magnetic sensitive products close to the unit. Only phones with built-in wireless system can recharged by this unit. For details, please refer the user’s manual of your phone. The design of the unit is indoor use. Never spill or spray any type of liquid on the product.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LOCATION OF CONTROLS: 1 3 2 1. 2. 3.
OPERATION: 1. Connect the Micro USB Plug from the supplied USB connec on cable to the Micro USB Port on the unit as illustrated below: 2. Connect the full size USB Plug to the USB Port on your USB Charger (not included) as illustrated below: 3. The Blue Indicator on the unit will illuminate & blink a few seconds , then turn off.
4. Place your cell phone onto the center of the charging surface as illustrated below until the Blue LED Indicator illuminate and blink slowly (or, the charging icon appears on the cell phone’s display) to start charging. (Note: If the location of the cell phone is incorrect, charging will NOT proceed.) 5. Wait until your cell phone finished charging as usual, the Blue LED Inidcator will stop blinking (or ,The full charging indicators appear on your cell phone’s display) Notes: 1.
GENERAL SPECIFICATION: Input: Output: Transmission Distance: DC 5V/2A or 9V/1.