Establish a WiFi 3 Pair MV2400 iii alienates 5 a 6 Set Login Password 7 Restore Factory Settings 8 Upgrade Firmware 10 Connection History 11 Reboot... 12 Set Date & Time 13 2 Copyright © 2017 Hardwired Corp. 12455 Sofas Ui Rye Link Res.
Establish a WiFi Connection To access the interment using the MV2458 a WiFi connection must be established with the host WiFi. Step 1 NG Step 2 NRL Step 3 Press power button on the M2458 to power up the Router and wait til all Bights are blue and flashing (approximately 2 min) Step 4 Go to the WiFi setting on your device (phone, tablet, laptop, enc. make sure your WiFi is fumed on) and click on the Network.
Establish a WiFi Connection Step 7 Step 8 Step 9 Wait unfit the scanning countdown has completed. The Available WiFi List screen will appear. Click on the WiFi Network that you would like the Router to connect to. If scanning does rot happen automatically you may need to complete the ‘Reboot” instructions on Page 12. Step 10 The password pop-up window will appear. Type in the password for the chosen WiFi host and click on the Connect bunion, Please acquire password from WiFi Host at your location.
Pair MV2400 The M2458 and MV2400 have been designed to operate cabled by Theme or tirelessly. If the WiFi system is used tirelessly the M2400 must be paired to the M2458 for proper operation. Step 1 Step 2 Step 3 Select Settings from the drop In Settings select Pair M2400. In the field Enter Mac Address enter the down menu. MAC address listed in the user's manual or the address listed on the device.
Set SAID Personalize your WiFi experience and increase the security of your MV2458 wireless network by changing the SAID and Password. Step 1 Step 3 Select Settings from the drop down menu. In Settings select Set SAID. In the field under 5.8G WiFi SAID replace the default name M\V24585.8G with a name of your choice. Step 4 Step 5 If you would like to change the required password to connect to the 5.8G WiFi SID, enter a new password in the field 5.8G WiFi Password to replace the default MV2458\0MFi.
Set Login Password After initial setup, it's recommended that the default login password be changed. admin is the default password. Step 1 Step 2 Step 3 Select Settings from the drop down menu. Step 4 In Settings select Set Login Password. In the field Enter Current Password type in the current password used to login te the application. Step 5 In the field Enter New Password type in the new password to be used to log in to the application. Click Apply.
Restore Factory Settings Option 1 The RV WiFi system can be restored to factory default settings if it is not functioning correctly. Option 1 resets the system by depressing the reset button on the bottom of the M2458. (This option may be necessary if you forget your admin password. Default passwords will apply after reset.) Hold for 8 Sec TT Make sure the MV2458 is powered on and wait approximately 2 minutes for it to completely start up.
Restore Factory Settings Option 2 Option 2 uses the in-software restore option. This option can be used to reset both MV2458 (inside unit) and M2400 (outside unit) back to factory defaults. Step 1 Step 2 Step 3 Select Settings from the drop down menu. Step 4 In Settings select Restore Factory Settings. Step 5 If you want to restore both units to factory settings, first restore the MV2400 and then restore the MV2458.
Upgrade Firmware As improvements become available, it may be necessary to upgrade the Firmware of the M2400 and M2458. Check for upgrades at www. Magnadyne.com. A PC may be needed to download & perform upgrade. Step 1 Step 2 Step 3 Select Settings from the drop In Settings select Upgrade Firmware. For either the MV2400 or the down menu. MV2458 click the Choose File button to select the firmware Update file that you will be using.
Connection History The connection history page shows past WiFi connections that have been made. If a previously visited WiFi location is no longer working for you, clearing the history and reestablishing the WiFi connection may solve your issue. Step 1 Step 2 Select Settings from the drop In Settings select Connection History. down mental Step 3 Step 4 The history can be cleared by When complete, you bill be taken pressing the Clear All button. to the Login screen.
Reboot Occasionally you might have connection issues or difficulty connecting new devices to your MV2458, ta fix this you can reboot the system. A reboot is not the same as Restore Factory Settings. A reboot only instructs the devices to refresh and start up again, it does not delete any of the settings. Step 1 Step 2 Step 3 Select Settings from the drop In Settings select Reboot. Click the Apply bunion and the entire down men. system (MV2400 and MV2458) will reboot approx. 45 sec.
Set Date & Time Your MV2458 has the ability to automatically synchronize date and time with the device you are using to run the application. If it has become synchronized, follow the steps below to re synchronize. Step 1 Step 2 Step 3 Select Settings from the drop In Settings select Set Date & Time. Click the Apply button. down menu. Step 4 Step 5 Wait unfit the reboot countdown Return to Page 3, Step 2 of has completed.
13 Copyright @ 2017 Magdalene Car. BIER Software Ui Rue Link Rev. A 615-7 Remarks: FCC Statement This equipment has been tested and found to comply with the limits for a Class Rules. These son able protection against harmful interference in a residential in B digital device, pursuant to Part 15 of the FCC limits are de singe d to provide =r installation.