User's Manual

ManualsBrandsMagnadyne ManualsElectronicsWireless Repeater

MV24500 RouterUser Guide

Establish a WiFi Connection

To access the internet using the MV2458 a WiFi connection must be established with the host

WiFi.

Step 1

Press power button on the MV2458 to power up the Router and wait until all lights are blue

and flashing (approximately 2 min).

Step 2

Go to the WiFi setting on your device (phone, tablet, laptop, etc., make sure your WiFi is turned

on) and click on the MV2400-2.4G Network. Step 3

In the Password field type in the password MV2400WiFi and click the Join button.

Password: MV2400WiFi

*Case Sensitive

Step 4

Wait until your device is connected to the MV2458-2.4G Network.

Step 5

Go to your web browser and in the address field type in 192.168.10.1 and click Go or hit Enter.

Address: 192.168.10.1

Step 6

The Login screen will open. In the Password field type in the password admin and click the

Summary of content (11 pages)

PAGE 1
MV24500 RouterUser Guide Establish a WiFi Connection To access the internet using the MV2458 a WiFi connection must be established with the host WiFi. Step 1 Press power button on the MV2458 to power up the Router and wait until all lights are blue and flashing (approximately 2 min). Step 2 Go to the WiFi setting on your device (phone, tablet, laptop, etc., make sure your WiFi is turned on) and click on the MV2400-2.4G Network.
PAGE 2
Password: admin *Case Sensitive Step 7 Wait until the scanning countdown has completed. The Available WiFi List screen will appear. Click on the WiFi Network that you would like the Router to connect to. If scanning does not happen automatically you may need to complete the “Reboot” instructions on Page 12. Step 8 The password pop-up window will appear. Type in the password for the chosen WiFi host and click on the Connect button. Please acquire password from WiFi Host at your location.
PAGE 3
If the password was not typed correctly a pop-up window will appear stating that the connection to the Network failed. Click the OK button. The unit will return to Step 7 and scan again. Double check that you are typing the correct Network password in. Step 12 The Status Screen will appear showing the connected Network under the title MV2400 (Outside) Information. Congratulations, Setup Complete. Establish a WiFi Connection The MV2400 have been designed to operate cabled by Ethernet or wirelessly.
PAGE 4
Step 5 Wait until the Pair MV2400 countdown has completed. Step 6 Return to Page 3, Step 6 of “Establish a WiFi Connection”. Set SSID Personalize your WiFi experience and increase the security of your MV2458 wireless network by changing the SSID and Password. Step 1 Select Settings from the drop-down menu. Step 2 In Settings select Set SSID. Step 5 Repeat this process for the 2.4G WiFi SSID and 2.4G WiFi Password to personalize your connection names and passwords. Step 6 Click Apply.
PAGE 5
Set Login Password After initial setup, it’s recommended that the default login password be changed. admin is the default password. Step 1 Select Settings from the drop-down menu. Step 2 In Settings select Set Login Password. Step 3 In the field Enter Current Password type in the current password used to login to the application. Step 4 In the field Enter New Password type in the new password to be used to log in to the application. Step 5 Click Apply.
PAGE 6
The RV WiFi system can be restored to factory default settings if it is not functioning correctly. Option 1 resets the system by depressing the reset button on the bottom of the MV2458. (This option may be necessary if you forget your admin password. Default passwords will apply after reset). Step 1 Make sure the MV2458 is powered on and wait approximately 2 minutes for it to completely start up.
PAGE 7
If you want to restore both units to factory settings, first restore the MV2400 and then restore the MV2458. Step 4 To clear and restore the MV2400 to factory settings click the Apply button below MV2400 Restore. Wait until the MV2400 Restore status bar has completed. Step 5 When complete, you will be taken to the Login screen. Return to Page 3, Step 6 of “Establish a WiFi Connection” and use the appropriate password. If the password has not been changed then use admin to login.
PAGE 8
Step 3 For either the MV2400 or the MV2458 click the Choose File button to select the firmware update file that you will be using. This file must be accessible by the device you are using to perform the update. Step 4 Once the file is selected the file name will be displayed in the field next to the Choose File button. Step 5 Click the Upload button located below the file name. The device will begin the update process. Follow on screen prompts. Do NOT turn off the power.
PAGE 9
Step 3 The history can be cleared by pressing the Clear All button. Wait until the Connection History countdown has completed. Step 4 When complete, you will be taken to the Login screen. Reboot Occasionally you might have connection issues or difficulty connecting new devices to your MV2458, to fix this you can reboot the system. A reboot is not the same as Restore Factory Settings. A reboot only instructs the devices to refresh and start up again, it does not delete any of the settings.
PAGE 10
Return to Page 3, Step 2 of “Establish a WiFi Connection”. Set Date & Time Your MV2458 has the ability to automatically synchronize date and time with the device you are using to run the application. If it has become desynchronized, follow the steps below to resynchronize. Step 1 Select Settings from the drop-down menu. Step 2 In Settings select Set Date & Time. Step 3 Click the Apply button. Step 4 Wait until the reboot countdown has completed.
PAGE 11
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.