i bd 111 « [IE] EH | I 5700 User's Guide 15” (14.
| TTYS. (ETM | Notices Copyright © 1999 MAG Technology 15F, No. 287,Sec. 3, Nanjing E.Rd, Taipei, Taiwan Tel: Fax: Ali Right Reserved No part of this publication may be produced or transmitted in any from derby any means, electronic or mechanical, including photocopying, recording, or translating into any language in any form without the express written permission of MAG Technology Co., Ltd JAG™, the MAG Innovation logo, and the screen logo are trademarks or registered trademarks of MAG Technology Co., Ltd.
MAG Innovation Please read all of the following instructions before use. The screen surface is coated with a special thin optical coating to ensure the Ergonomic characteristics. Clean the screen surface lightly with a soft cloth. If necessary, use a soft cloth lightly moistened with a mild detergent solution (no abrasive) diluted with water to remove hand oils or fingerprints, etc.
STOOD User's Guide § Contents Sicherheitshinweise 6 wv 7 Specifications 8 Safety Precautions 9 Introduction 10 JAG™ Control 10 e-Video Function io On Screen Display {OSD} i DDCPIug& Play 1 MPR Stand TCO Compliant 11 EPA™ Energy Star®and VESARDPMS™ 1" & Setting up Your Monitor 12 Operation 13 Image Adjustment 14 OSD Options 14 Video Modes 6 e-Video Function 17 Pin Assignment 18 TCO 95 Environmental La belling {For COSTCO User only} 19 Regulatory Compliance Statements 21 Customer Service 23 S70FD.
MAG Infovision Sicherheitshinweise Bitte lesen Sie die folgenden Hinweise vor der Inbetriebnahme sorgfältig durch. Beachten Sie alle am Gerät angebrachten Wangen und Hinweise. « Trennen Sie das Gerd vor dem Reinigen zunächst vom Stromnetz. Verwenden Sie weder Reinigungsfliissigkciten noch Sprays. Reinigen Sic das Gerbmittel einem leicht angefeuchteten Tuch. + Betreiben Sie dieses Grat nicht in einer Umgebung, in der Wasserspritzer auftreten konnten.
MAG Innovation IT . Specifications All Specifications are subject lo changed without notice or obligation. CRT Dot pitch Max Resolution Display color Scanning frequency Display area Pix Rate Input signal & Power supply Power consumption Recommended ambiance Dimensions Weight Certifications Power Management T | S70F0.PEE 15-inch (14.0" viewable) SONY FD Trinitron® picture tube with coating, anti-glare, anti-static, 90° deflection 0.
570FD User's Guide 9 Safety Precautions Please read all of the following instructions before use. » Follow all warnings and instructions marked on this product. * When cleaning this monitor, first unplug it from the wall outlet. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, Do not use this product where water spills may occur. + Prevention from falling, do not place this product on an unstable surface.
FLATT] « [EE 10 MAG Innovation Introduction The STOOD is a 15-inch (14.0 viewable) multi-scanning, ultra high resolution color monitor with SONY FD(Flat Display) Trinitrotoluene. With state-of-thwart electronics, this monitor is capable of resolutions up to 1280x1024 non interlaced. The intelligent microprocessor-based design enables the monitor to automatically synchronize and adjust to most common video modes.
Cf ETT] oo (EE | S70FD User's Guide 1} On Screen Display {OSD} The combination of the JAG™ control and OSD (On-Screen Display) makes it Easter for you to make precise screen format adjustments simply. The User Mode control within the OSD allows you to change and save custom display characteristics and timing modes. DDC Plug & Play With when the monitor is powered up, it will automatically notify a Windows® 95/98/NT host computer of its scanning frequencies, capabilities and characteristics.
CTT oe 12 MAG Innovation Setting up Your Monitor Setting up your monitor is easy. Just make a few simple connections and adjustments. The following procedure is to guide you to the paper usage of this product. To connect the monitor to the system: I. Turn off the power to your system and all its attached options. 2. Make sure that your equipment is in cable-reaching distance from a properly grounded electrical outlet.
STD User's Guide 13 Operation Make sure you carefully follow the “Safety” and “setting Up Your Monitor” instructions to install your monitor to your system before operating your monitor. You may also want to familiarize yourself with the “Image Adjustment” section of this manual before making any operational adjustments to your operating monitor. To operate the monitor: 1 Turn on the monitor by pressing the power button once. The power LED lights and the monitor demagnetizes itself for about five seconds.
MAG Innovation Image Adjustment The JAG™ is designed to provide full user programming capabilities in ane simple-to-use location for a more ergonomically-friendly design. This allows you to choose a control and make necessary display adjustments with just one dial. To adjust other visual settings: I Press the JAG. The Main Menu appears, displaying the current resolution and a number of visual setting options. (refer to the “OSD Options” section of this manual), 2.
BEET. (me S70FD User's Guide 15 + Reset While in a preset video mode, press the JAG dial to reset all customer display setting to the factory default settings. + Advanced options Activates the secondary menu that displays options for rotation, bow, parallelogram, corner, Moire, Focus and Convergence, + Rotation Adjusts the tilt of the display.
nn FIT] + [WE 16 MAG Innovation + User Mode Activates the User Mode sub menu. This stores the display characteristics of a specific resolution {not already defined as a factory preset timing mode) into the monitor's memory. This saves you from having to readjust the display features each time you reboot (refer to the “Video Modes” section for preset timing options) the computer, + OSD Manager Activates the OSD Manager sub menu, This allows youth adjust the OSD menu position on the display.
EET TT [EW STOOD User's Guide 17 Pin Assignment The pin assignment of the connectors is listed below for professional use only. Please do not attempt to alter the connections yourself as this may seriously damage the monitor. Pin No. Assignment 1 Red Video input 2 Green video input 3 Blue video input 4 Ground 5 Ground (DDC) 6 Red video ground 7 Green video ground 8 Blue video ground 9 No connection 10 Ground 1 Ground * 12 DDC SDA * 13 Horizontal sync. 14 Vertical sync.
TTT. (WE LET] 18 MAG Innovation TCO 95 Environmental La belling (For COSTCO User only) Congratulations! You have just purchased a TCO 95 approved and labeled product! Your choice has provided you with a product developed for professional usc.
| ETT 370FD User's Guide [9 Current information regarding TCO 95 approved and labeled products may also be obtained via the Interment, using the address: TCO 95 is a co-operative project between TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTTED (The Nation) Board for Industrial and Technical Development in Sweden) Environmental Requirements Abominated flame retardants Abominated flame retardants are present in printed ci
MEET [1] (MET TT. ® 20 MAG Innovation Regulatory Compliance Statements C American User: This monitor has been tested to comply with the limits for a Class B digital device, Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference within a residential area. This equipment is able to radiate radio frequency energy therefore using in non accordance with the instructions, may cause harmful interference to radio communications.
570FD User's Guide 21 + Canadian Users: This digital apparatus does not exceed the Class B digital limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le present apparel numeric nonmetal pas de bruits radiotelephones depressant les limited applicable aux apparels communiques de class B prescribes sand le regalement sur le bouillabaisse electrocardiogram &dict par Industrious Canada.
Customer Service Please direct inquires regarding warranty coverage to your Authorized Ultimate Reseller, Authorized Distributor, or Worldwide service centers listed below: Australia; MATRON MONITORS (Australia) PTY, LTD. Unit B2, 1-3 Rod borough Ru ad, French Forest, NSW 2086 Tel: +81 (2) 9975-3727 Fax: +61 (2) 9975-4872 internet: hitp//www magiron.com.au E-mail: Europe: Euro Mag Technology B.V.