Operation Manual LT561 Bl | cocoas -o HEN 15"Ultra High Resolution Analog Interface LCD Monitor “pp = wen a Ir Fee 10: TRAWLS Bb)
FCC COMPLIANCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant ta Part 16 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment grates, uses, and can radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
7 YELTSIN p35 SAFETY INSTRUCTIONS 1.Read all of theses instructions. 2.Save these instructions for later use. 3.Follow AK-warnings and instructions marked on the product. 4.Unplug this product from the wall cutlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water. 8. Do not place this product on an unstable car, stand, or table. The product may fail, causing serious damage to the product. 7.
| ETT) CE WET || 12.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result In a risk of fire or electric shock. Never spill liquid of any kind on the product. 13.00 not attempt to service this product yourself, as opening or removing covers may passe yau io dangerous voltage points or other risks. Refer all servicing to service personnel. 14.
I L581 p85 8 2450, 13:50 AM | rr TABLE OF CONTENTS SICHERHEITSHINWEISE airs 1 FCC COMPLIANCE STATEMENT 3 SAFETY INSTRUCTIONS 4 INTRODUCTION 7 2.SETUP 3.ADJUSTING THE CRADLE(OPTION) * 4.CONTROL AND ADJUSTMENTS wuccvesmnsmnsernnes 14 5.DISPLAY POWER MANAGEMENT 17 1! 6.
1. INTRODUCTION 1.1 General Information Welcome to the exciting world of high resolution graphics with your purchase of the color LCD monitor The Made is a 15-inch intelligent LED monitor with ultra high resolutions of up to 1024 x 788. The microprocessor-based design was implemented with the user in mind by providing digital controls. We invite you, the proud new owner of this fine monitor, to read this user's manual before operating. 1.2 Features . 15" Large Size XGA TFT LCD Panel » 0.
|| —T) <4 COG || 1.3 Check list Before using this monster, please make sure {hat all the items listed below are present in your package: * LCD monitor . AC-DC power adapter . This manual . Power Cord A ! 7561.
LCD Monitor setup 2.21. Power Cable Connection Connect the female end of the power cable to the power input receptacle on the power adapter of the monitor. Then, plug the power cable into the wall outlet, the other end of the prows adapter into the DC-IN of the monitor { for cheek ). 2.22 Signal Cable Connection Connect the 15-pin end of the VGA signal cable to the female 15-pin DAUB connector of your VGA card. T T KB MOUSE { ETC. (DOWN STREAM} STREAM} wu ° ANALOG VGA SIGNAL CASE 2.
Bl me | CIS IH 3. ADJUSTING THE CRADLE 3.1 Bezel Adjustment The Cardie can be adjusted for you adjusted through angles of 20 deg ir maximum viewing comfort. t can be ea up and 5 degree down. 10 LT561.
4. CONTROL AND ADJUSTMENTS Front Panel Controls a als I * 4.1 Power Switch Press this button to tum the power ON or OFF. There will be a second delay for the monitor fo boost up. . 4.2 Power LED The LED indicator should be ON if the power cord is properly connected and the power button Is switched ON. During operation, the indicator light is green. I will turn orange if the monitor Is in Power Saving mods or there Is no signal applied (the signal cable may not be properly connected or your computer fail).
| —TT) HOT KEYS Without press of MENU key to enter the main OSD menu selections you may quickly adjust screen Brightness and Speaker Volume by means of hot keys,. 4.3.1 Brightness Control 3k will Without press of MENU key, just hit the Lk + will increase, decrease the Brightness . A status bar would be displayed on the screen ta let us know its current setting. BRIGHTNESS 4.3.2 Volume Control + Without press of MENU key, just hit the | + will increase , o] -wilt decrease the Volume of the speaker.
| —T) 4 CHS 4.4 OSD Main Menu Operation The OSD menu enables you an easy way to change many features of the monitor in a simple and easy to understand way through its icons and status bar chart. These operations are selected by press of MENU kay. Press MENU key first, we may adjust the following functions In the A group. — Press MENU key again, we may adjust the following functions in the B group. In the second menu operation, press the MENU again will end the OSD menu operation.
El + (ET. I. 4.4.1 Enter Main MENU Selections Group A Press the MENU key will enter into the main menu selections group A. [RESOLUTION:10242768 oOOREE0® POTION H168 KHz V:850Hy" 4.4.1.1 Horizontal Positions Use the and to move the cursor to the icon shown as 0] + then press to adjust the display to right, and “* to left until you are satiation with the result. A status bar wife be displayed to let you know the current setting value. 4.4.1.
|| ——TT] ¢ C 4.4.1.5 The Auto Adjustment Use the Kad and >" to move the cursor to the icon shown as 3, then press adjust the smelting 10 its best result automatically. 4.4.1.6 The Expansion ON/OFF Use the and to nova the cursor to the icon shown as then press 10 toggle the EXPANSION setting on or off. 4.4.1.7 The System Reset Use the and to move the cursor to the icon shown as then press execute the SYSTEM RESET. This action wil initialize the settings fo their original factory default setting. 4.4.
+ 1 4.4.2.2 The Enhanced Color ON/OFF Use the and —T to move the cursor to the icon shown as 6&3, then press toggle the ENHANCED COLOR setting on or off. 4.4.2.3 R, G, B Adjustment Use the Lr and tt to move the cursor to the icon shown then egress adjust the RED, GREEN and BLUE settings respectively until you are satisfied with ths result. A status bar wilt be displayed to let you know the current selling value. 4.4.
| CT oo (NEE TEN | 5. DISPLAY POWER MANAGEMENT 5.1 Definition of modes There are three modes of operation for the model. These are ON, SUSPEND and OFF. ON Both horizontal and Vertical syncs are present and the monitor is In normal operation. Suspend Horizontal or Vertical sync Is inactive per VASE DIMS spec. and not operational. Alf parts of the monitor ara disabled except for the Micro controller and the Detection Logic Circuit. OFF Both Horizontal and Vertical sync are inactive par VASE DIMS pace.
i eck APPENDIX Ho! * Panel Part : Leo: ae 15.0" 1624X768 TFT (Thin Film Transistor) * Monitor Part; LT561.065 Effective Display Size: (Diagonal) 15.6 inch (304mm x 228mm) -— near 17° CRT > Ad paper size Resolution & Display Colors: XGA 1024X768 120 HZ a-chi TFT 64/256K Solar Pixel pitch: 0.297mm RGB Stripe Brightness(Luminance): Two Lamps (CC FT) for Monitor 200 dim? Type.
Signal Cable: Locally (Self) powered pure hub, supporting full speed USB 1 upstream (B Type Receptacle, 4 downstream (A Type Dual port Receptacles) * Power Supply: + Watts Power Down Mods « 8 Watts (SUSPENSEFUL) + AC/DC Adapter: Inputs” 100 240 Vac, 1A, 50-60Hz Output: 12Vdc, 3A Blvd, 1A * Dimension & Weight: . SIZE: Landscape : 380 x 376.5 x 170mm (WxHxD) . WEIGHT : Gross : TBD + Net: TBD * Regulation: + Standardization UL, CUL, TOV, T-Mark . . EMI Standards CE, FCC CLASS B, COCCI .
An error occurred while printing this page. Error: limit check fend Command: save Suggestions: pe . File may contain EPS graphic’ wile too many grouped elements. Grouping elements or uss fever levels of grouping. Pin 1 Red Pin 2 Green Pin Blue Pin No Connection Pin Ground Pin Red Ground Finn.
APPENDIX B: The pin assignment of the connectors is listed below for professional use only. Please do not attempt to after the connections as this may seriously damage the monitor. VGA Connector Mini Red Pin 2 Green Pin 3 Blue Pin 4 No Connection Pins Ground Pin 6 Rad Ground Pin? Green Ground Pin 8 Blue Ground Ping No Connection + Pin 10 | Ground + Pin 11 | No Connection Pin 12 SDA Pin 13 Horizontal Sync ' Pin 14 | Vertical Sync .