REE @® Appendix B: PIN ASSIGNMENT The pin assignment of the connectors is listed below for professional use only. Please do not attempt to alter the connections as this may seriously damage the monitor.
IE [1 5. Power MANAGEMENT 5.1 Definition The power management feature enables this monitor to recognize VESA® DPMS™ (Display Power Management Signaling) signals trim a VESA® DPMS™ video adapter and power down to less than 15 watts of power consumption. A VESA® DPMS™ compatible video adapter achieves the signaling by setting horizontal, or vertical, or both synchronization signals to inactive. The monitor recognizes all three types of signals and enters into the appropriate mode.
3. CONTROLS & FUNCTIONS [CE Stores the display characteristics of a specific resolution (not ready defined as a factory preset timing mode) into the monitor's memory. This saves you from having fo readjust the play features each time you reboot. Following these steps to store a customer timing mode into on of the 7 User modes. Step 1: Rotate the JAG™ dial to highlight the User Mode function and press the dial to register your selection.
3. Controls & Functions e. V-Size [T] Increases and decreases the display height. V-Position 5 Shifts the display up or down. pincushion Bends the sides of the screen display inward or outward. Trapezoid 0 Adjusts the top and bottom display widths to be even. Degassed FY Removes any discoloration from the display image due fo elev. electromagnetic field buildup. It is not usually necessary 0 degassed your monitor, unless it has been moved.
3. Controls & FUNCTIONS Power Button JAG Power Dial Indicator 3.1JAG™ The JAG is designed to provide full user programming capabilities in one simple-to-use location for a more ergonomically-friendly design. This allows you to choose a control function and make necessary display adjustments with just one dial. Note: The OSD disappears after 10 seconds without adjustment. 3.
2. Setup Setting up your monitor is very easy. Just make a few simple connections and adjustments. The following procedure is to guide you to the proper usage of this product: 2.1 Power Case Connection Connect the female end of the power cable to the Power Input receptacle on the back panel of your monitor and plug the male end into the power outlet. Connection tor AG Cord Attached Video Signal Cable 2.2 Signal CABLE Connect Ion The monitor has an built-in signal cable with a male 15-pin mi D-sub connector.
1. INTRODUCTION 1.1 Genera L INFORMATION Congratulations on your purchase of a MAG E5005 monitor, featuring some of the latest technology like our exclusive JAG™ dial and On-Screen Display {OSD) for a more electromagnetically design, The E5005 monitor is an EPA Energy Star™ compliant, multi frequency color monitor with a 15-inch (1 3.9" Viewable) Flat square tube. With state-of-the-art electronics, this monitor is capable of resolutions up to non-interlaced 1280 x 1024 (addressable).
FCC Compliance STATEMENT This monitor has been tested to comply with the limits for a Class B digital device, Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference within a residential area. This equipment is able to radiate radio frequency energy therefore using in non accordance with the instructions, may cause harmful interference to radio communications.
© 1996 MAG Innovation Inc. hts reserved. This manual may not be copied in whole or part without written consent of MAG envision Inc. MAG Innovation is not responsible for printing or clerical errors. JAG, MAG innovation and the screen logo are trademarks or registered trademarks of MAG Technology Co., Lid. in the United States and other countries, and are used by MAG Innovation Inc. under license. Windows® is a registered trademark of Microsoft Corporation.