Users Manual

① ②
Ⅲ.Password Learning
Ⅱ.TechnicalData
Operatingvoltage: 3V Batterytype:CR2430 WorkingCurrent: ≤10mA
ProtectionIndex: Ip30 Code:Rollingcode
Permissibleambienttemperature: -20℃ ~ +60℃ RadioFrequency: 433. 92MHz
Press the channel shift button
shortly can choose channel
(1~4) back and forth, the light
of the channel will twinkle if
you choose one.
Choose one channel and press the
learning button on the back of the
ransmitter twice shortly, and press
Up button ,the operation of learning
password is finished.
(the same as other learning ways of
channels)
Ⅳ.Single Control Setting
Choose channels at random through button "Channel switch" , press the Up/ Stop/Down button
shortly can control the function of the present tubular motor.
Ⅴ.The Group Control Setting
Press the channel shift
button shortly can choose
channel (1~4) back and
forth, the light of the channel
will twinkle if you choose one.
Attention: group control setting
can be used only the four lights
twinkle!
Up
Stop
Down
LED
Learning Button
Ⅰ.Product Appearance
Transmitter EL03-HH04
Channel
switch
EL03-HH04 Four channel Back
Attention
1. Don' t press the button for too long in order to add the battery's life.Press the
button for about 0.5S each time, and space the button for 1S each time you
press it.
2. The emitter will stop working when the battery is low,please change the same
model battery.
3. These series of products are forbidden to fall from upper air.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 0mm between the
radiator and your body.
FCC Statement