Maeden Model no.
1.打開背面電池蓋並裝入電池 AA *2 PCS Open the battery cover and insert 2 PCSof AA battery 2.將 XLR ⼀端接⾄機艙⾳頻系統插座,另⼀端接⾄頭盔的 XLR 插座 Connect the XLR to theaudio systemand the other XLR to the helmet. 3.轉動 VR 旋鈕,可控制耳機⾳量大小 Turn the VR knob to control the volume of the headphones. 4.按電源鍵可提供+3V 電壓給頭盔降噪使用,開啟(紅色 LED 亮),關閉(紅色 LED 熄滅) Press the power button to provide +3V voltage for the helmet to active the ANC function (active noise canceling) of the helmet. (Red LEDindicator light) Using theControllerwith a Bluetooth device 5.
8.短按控制盒側邊的+/-按鍵,可調整藍芽⾳源的⾳量大小 Short press the +/- button on the side to adjust the volume of Bluetooth source. 9.⻑按控制盒側邊的+/-按鍵,可選擇藍芽連結裝置的上下首⾳樂 Long presses the +/- button on the side to switch the music of Bluetooth source. 10.使用藍芽時,若每間隔 5 秒鐘聽到嘟嘟嘟聲,表示電池電力不足,請更換新電池 When using the Bluetooth, if you hear a beep every 5 seconds, it means the battery is low, please replace the battery.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Model:ANR-BP FCC ID :2ATRIANR-BP THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
