Instructions / Assembly

Page
1
of
1
ASSEMBLY INSTRUCTIONS
Description: Grayson Accent Chair
Important safety instructions:
• Please read carefully all instructions before assembly.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly:
• Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
• Take out all parts and hardware from box.
Parts List
Item
Description
QTY
P1
Legs
4
P2
Chair
1
Hardware List
Item
Description
QTY
H1
Bolts
φ5/16*1-3/16"
12
H2
Lock Washers¢5/16"
12
H3
Flat Washers
¢5/16"
12
H4
Allen Wrench
¢3/16"
1
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES RESULTING
FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step 1. Remove the seat cushion and take out the legs and hardwares under the seat.
Step 2. Turn over the chair and lay on protective carpet ，using bolts (H1), lock washers (H2), flat washers (H3), connect
legs(P1) to chair (P2). Tighten bolts (H1) with Allen Wrench (H4).
Step 3.Place chair upright on a level surface. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE PERIODICALLY
INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL HARDWARE IS KEPT
TIGHTENED ・
Thank you for your purchase
*12
*4
*12
*12
P2
P1
P1
P1
*1