Product Card
EMC compliance statement
The statements on this page apply to the following adapters:
Smart 16/4 PCI Ringnode Mk2
Smart 16/4 PCI Ringnode Mk3 (WOL)
Presto PCI 2000
16/4 CardBus Adapter Mk2 (with Class B certification)
Smart 100/16/4 Ringnode MK2
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
this device may not cause harmful interference
this device must accept any interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
reorient or relocate the receiving antenna
increase the separation between the equipment and the receiver
connect the equipment into an outlet on a circuit different from that to which the receiver is connected
consult the dealer or an experienced radio/TV technician for help
The user is advised that any modification to the board not expressly authorised by the manufacturer may void the user's authority to operate this device.
Canadian Statement
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
European EMC Directive
This product carries the CE mark to indicate that it meets the requirements of the European Directive on Electromagnetic Compatibility (89/336/EEC). It has been tested to the following standards: EN55022:1994, EN50082-1:1992. For operation in commercial or industrial environments (Class A), there are no restrictions on cable types that can be used.
1 of 1 09/08/99 16:47
EMC compliance statement file:///D|/Approval/PCI-HS FCC Certification/emc2.htm