User's Manual Part 1

ManualsBrandsMadge ManualsElectronicsEnterprise Access Point 802.11b/g Dual-Radio

Federal CommulIicMon Commiuwnlnterferenee Stntement

This equipJlrentbas been tested and found to comply ",ith the limits for a Class Ii device.

pursuant to Part J5 of the FCC Rules. 111eselimit>are to provide protection

harmfui interference in u residcntini uses aud can

if uot iu justroctious.may

cause harmful to cUJ!1J!1Unications.However, there is no that interfercn<;e

will not OCQITin a particular imtaUation.if this equipJ!1Clltdues cause interferenceto "do or

televisiml reception, which can be deter.uined hy turning the equipment oi! and on, the user is

cncourugedto try to correcttireinterference hy one of tirefol1(""i[\1\measures:

IEEE 802.11g

Wireless Dual-Radio Bridge-AP

Reorient or relocate the receiving antenna.

increase the separmioo ~ween tbe equipment and receiver.

Connect the equipment into an outlet on It circuit different from that to which the receiver is

COIllIce!W.

Consuit the dealer or an experien\:w 11I4ioffV tedmidttn for help.

User's Guide

~'CC Caution: To assure continued compliance, (example - use oniy shieided interface calJles when

connecting to computer or peripheral dcvkes). Any changt~' or mndificat10ns nut expressly approved

hy the party responsible fue compliance couid void the user's authority to operate this equiptnenL

This tF.msmiuer must nol be co,locutoo ur nperating in cnnjunction with any other antenna or

transmitter.

FCC Radiation Exposure Statement

Version: 1.0

ThLy equipment complies with FCC radiat;"" exposu'" limits Jel forth foT <111ullcontrolle.rl

environment. This equipl>t<':l#.<IIQuldbe in.ftoiled olld operated with minimum distance 20 tm henveen

rhe Todiatof «: YOUf body.

Canada (industry Canada):

To prevent radio interference to the licensed service (i.e, co-channellUobile

Satellite .1J'stems) this device is intended to be operated indoors and awayfrom

windows to provide maximum shielding. Equipment (or its transmit antenna) that is

. installed olltdoors is sub;ect to licensing.

Last Updated: 11/01/2004

Summary of content (8 pages)

PAGE 1
Federal CommulIicMon IEEE 802.11g Wireless Dual-Radio Bridge-AP Guide Stntement This equipJlrentbas been tested and found to comply ",ith the limits for a Class Ii device. pursuant to Part J5 of the FCC Rules. 111eselimit> are to provide protection harmfui interference in u residcntini uses aud can if uot iu justroctious. may cause harmful to cUJ!1J!1Unications. However, there is no that interfercn<;e will not OCQIT in a particular imtaUation.
PAGE 2
PAGE 3
.6.1. PacketFilters 3.6.1.1.EthernetType Filters 3.6.1.2.IP ProtocolFilters 3.6.1.3.TCP/UDPPort Filters 3.6.2. Management 3.6.2.1.UPnP 3.6.2.2.SystemLog 3.6.2.3.SNMP AppendixA: DefaultSettings AppendixB: Troubleshooting AppendixC: AdditionalInformation C-1: FirmwareUpgradeUsingXmodemUpgrade 37 37 38 38 39 39 39 40 41 42 44 44 1. Introduction 1.1. Overview The wireless Dual-Radio Bridge-AP (DRBAP for short) is a multifunction device that has two independently configurable IEEE 802.llg interfaces.
PAGE 4
PAGE 5
be viewed using a Web browser. + . . Remote loa bY SNMP traD. Systems events are sent in the fonn of SNMP traps to a remote SNMP management server. Power over Ethernet (oDtional). Supplying power to a DRBAP over an Ethernet cable using PowerDsine (http://www.powerdsine.com) technology (IEEE 802.3af compliant in the future). This feature facilitates large-scale wireless LAN deployment. Hardware Watchdog Timer.
PAGE 6
PAGE 7
right to access the Web-based Network Manager. For first-time configuration, use the default user name "root" and default password "root", respectively. 2.4.2. Step 1: Selecting an Operational Mode C Bridge Repeater "- '-..... ~,~ (!. AP Repeater """ ~'P'_""fl C Dual AP "-' 0.... ".. "- Fig. 5. Operational modes. Fig. 3. Entering the user name and password. NOTE: It is strongly recommended that the password be changed to other value for security reasons.
PAGE 8