User Manual

Safety and regulatory
information
This section lists required safety, conformity and regulatory
information for certain jurisdictions for the Access Server.
The regulatory information in this document is correct at the time
of this software release. As distribution extends to additional world
regions, further approval information will be updated on the
product rating plate and the Madge website www.madge.com
.
North America
European Economic Area
North America
By attaching the mark to this product, we confirm:
This equipment complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesirable
operation.
To conform with FCC rules regarding RF exposure, this equipment
should be installed a minimum of 20 cm away from any personnel.
Any changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the
equipment.
This device has been designed to operate with an antenna that
has a maximum gain of 0 dB. Antennae that have a higher gain
are strictly prohibited as per regulations of Industry Canada. The
required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication.
To prevent radio interference to the licensed service in Canada,
this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to licensing.
top