Wireless Stereo Headset Table of Contents 1. Package Contents 2. Headset Controls / Base Station 3. Battery Installation / Power Save Mode / Wireless Range 4. Xbox 360 Component/Composite /VGA Setup 5. Xbox 360® HDMI Setup 6. Xbox 360® E Setup 7. PlayStation®3 HDMI/Component /Composite Setup 8. PlayStation®4 Connect to Controller Setup 9. PlayStation®4 Back of TV Setup 10. Wii U GamePad™/Mobile Devices Setup / Sync Headset to Base Station 11.
Wireless Stereo Headset A B Kunai Headset Base Station D C 3.5mm Mobile / Wii U™ / PS4 Cable E USB Cable 3.
Headset Controls A Push to turn Headset ON/OFF. Press and hold for 3 seconds to Sync Headset to Base Station. See page 10 for more information on syncing the Headset to the Base Station. B Use to adjust the volume of the game audio. C Use to adjust the volume of the voices of other players or music/game volume when using 3.5mm jack on headset D Fold the mic up to mute. C B D A Base Station POWER IN B AUDIO IN C A A Flashing: Syncing or searching for Headset.
Battery Installation Insert 2 AA batteries into the Headset matching the polarity as shown. When the battery level is low, the power LED will flash. Battery life = 20 hours (based on constant audio playback at medium volume. Power Save Mode If the Headset receives no audio for 10 minutes, the Headset will power down to save battery power and the LED on the Base Station will flash.
Xbox 360 Component/Composite/VGA * G C E 2 1 EF 1 Plug one end of the USB Cable C into a USB port on the gaming console. Plug the other end of the USB Cable C into the USB Port of the Base Station. 2 Plug Component/VGA/Composite G Cable into Xbox 360. 3 Connect RCA connection Cable to red/white connectors on the Component/VGA/Composite Cable. 4 Plug 3.5mm Audio Cable E into the Audio Input of the Base Station.
Xbox 360® HDMI G C E 2 1 F 1 Plug one end of the USB Cable C into a USB port on the gaming console. Plug the other end of the USB Cable C into the USB Port of the Base Station. 2 Plug Analog Audio Adapter H into Xbox 360 AV Port. 3 Plug Analog Audio Adapter H into RCA connector Cable. G 4 Plug 3.5mm Audio Cable E into the Audio Input of the Base Station. 5 Connect the Headset Connector Cable F in the proper order: 1- Connect Headset Connector Cable to the Headset Connector Port on the Headset.
Xbox 360® E C E 1 2 1 F Plug one end of the USB Cable C into a USB port on the gaming console. Plug the other end of the USB Cable C into the USB Port of the Base Station. 2 Plug 3.5mm Audio Cable into the Audio Input of the Base Station. Plug the other end into the 3.5mm A/V port on the Xbox 360. 3 Connect the Headset Connector Cable in the proper order: 1- Connect Headset Connector Cable to the Headset Connector Port on the Headset.
PlayStation®3 HDMI/Component/Composite * ** G C E * Not Included / Non inclus ** Included with console / Inclus avec la console D 1 Plug one end of the USB Cable C into a USB port on the gaming console. Plug the other end of the USB Cable C into the USB Port of the Base Station. 2 Plug RCA Connector Cable G into the red/white connectors of the PS3 AV Cable 3 Plug the 3.5mm Audio Cable into the RCA connector cable G 4 Plug 3.5mm Audio Cable E into the Audio Input of the Base Station.
PlayStation®4 Connect to Controller * D * Not Included / Non inclus ** Included with console / Inclus avec la console 1 Plug one end of the 3.5mm Mobile/Wii U/PS4 cable D to the PS4 controller. 2 Plug the other end of the 3.5mm Mobile/Wii U/PS4 cable D to the port on the left earcup of the headset.
PlayStation®4 Back of TV * ** G C E 1 Plug one end of the USB Cable C into a USB port on the gaming console. Plug the other end of the USB Cable C into the USB Port of the Base Station. 2 Plug the Red/White connectors of the RCA Connector Cable G to the back of the TV. 3 Plug the 3.5mm Audio Cable E into the RCA Connector Cable. 4 Plug the other end of the 3.5mm Audio E Cable into the Base Station.
Wii U GamePad™/Mobile Devices D Wii U™ Nintendo 3DS™ X A Y B SELECT HOME START MIC BATTERY POWER PlayStation®Vita Tablets/Phones Plug one end of the 3.5mm Mobile/Wii U/PS4 cable D to the device. Plug the other end of the 3.5mm Mobile/Wii U/PS4 cable D to the port on the left earcup of the headset. Sync Headset to Base Station Note: Headset is synced to the Base Station at the factory. This step is only necessary when syncing a new Headset to the Base Station.
PC / Mac D C A Plug one end of the 3.5mm Audio Cable D to the headphone jack of the PC/Mac. A Plug the other end of the 3.5mm Audio Cable D to the Base Station. A Plug one end of the USB Cable C into a USB port on the gaming console. A Plug the other end of the USB Cable C into the USB Port of the Base Station. For immediate support, visit HTTP://SUPPORT.MADCATZ.COM to find the latest documentation, Knowledge Base articles, and software for your device.
EN Addendum Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules.