User's Manual Part 2

ManualsBrandsMad Catz ManualsElectronicsGameSmart C.T.R.L.R

LED INDICATORS

INITIAL SETUP

1. Insert fresh batteries into the battery compartment

2. Ensure the controller is OFF (no LED lights)

3. Set Mode Switch to one of below modes:

• When connecting to Windows PC or Mac OS X, set Mode Switch to:

• When connecting to Android OS/M.O.J.O. console, set Mode Switch to:

Product is connected to a device

but battery is low

Product is connecting to a device

Pairing Info is removed

Product is connected to a device

BLINKING RED

SOLID PURPLE

SOLID RED

BLINKING BLUE

Product is ON and not

connected to a device

BLINKING BLUE TO RED

CONNECTING VIA BLUETOOTH

1. Press and hold the “Home” button on the controller until its LED blinks blue and red

2. Ensure Bluetooth is enabled on your phone, M.O.J.O. console, tablet or computer

3. Select ‘search for devices’ on your device

4. Choose ‘Mad Catz C.T.R.L. R’ under the Device List to connect

5. Once connected, the LED indicator will blink blue. The controller is ready to use

Summary of content (7 pages)

PAGE 1
LED INDICATORS BLINKING BLUE TO RED Product is ON and not connected to a device SOLID PURPLE Product is connecting to a device BLINKING BLUE Product is connected to a device BLINKING RED Product is connected to a device but battery is low SOLID RED Pairing Info is removed INITIAL SETUP 1. Insert fresh batteries into the battery compartment 2. Ensure the controller is OFF (no LED lights) 3.
PAGE 2
R1 SETUP INSTRUCTIONS MOUSE MODE R1 R2 L1 L2 R2 L2 1. When the controller is connected via Bluetooth, it can also be used as a mouse control for your connected device 2.
PAGE 3
SETUP INSTRUCTIONS MAD CATZ A.P.P. PROGRAMMING SOFTWARE 1. Follow the above instructions for connecting to a Windows PC, or Mac OS X 2. Download and install the desktop software from www.madcatz.com/downloads This software enables controller programming. UNPAIRING THE DEVICE 1. Press and hold the “Start” button for five seconds until the LED shines red. The LED will then blink blue and red indicating paired info is removed and the controller is back in discovery mode 2.
PAGE 4
FIRMWARE UPDATES The C.T.R.L. R is firmware upgradeable and future-proofed against upcoming developments in Bluetooth/mobile gaming. As Bluetooth Smart becomes more widely implemented on mobile devices, Mad Catz will release an update that will enable your C.T.R.L. R to intelligently determine connectivity to your devices. With the addition of Bluetooth Smart, the C.T.R.L. R gains reduced latency and increased battery life. When Android 5.0 and/or Bluetooth 4.1 are enabled on your device, check www.madcatz.
PAGE 5
EN FCC & IC WARNING This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS stan¬dard (s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 6
FR AVERTISSEMENT DE LA FCC & IC (INDUSTRY CANADA) Cet appareil répond aux exigences de la section 15 de la réglementation FCC et aux normes RSS sans licence d’Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce périphérique ne doit pas provoquer d’interférences nuisibles et (2) il doit accepter toute inter¬férence reçue, y compris les interférences susceptibles de causer un dysfonctionnement.
PAGE 7
©2013 Mad Catz, Inc. 7480 Mission Valley Road, Suite 101, San Diego, CA 92108 U.S.A. Mad Catz, C.T.R.L.R. , GameSmart, and the Mad Catz logo are trademarks or registered trademarks of Mad Catz Interactive, Inc., its subsidiaries and affiliates. The shape and design of this product are a trade dress of Mad Catz Interactive, Inc., its subsidiaries and affiliates. Android is a trademark of Google Inc.