Dual Screen Portable DVD Player D I G I TAL PHOTO OWNER'S MANUAL
SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
TABLE OF CONTENTS Safety Precautions ..................................1 Important Safety Instructions ................. 2 Table Of Contents .................................... 3 Disc Formats ............................................ 4 Accessories ............................................... 5 Remote Control ........................................ 5 Control Reference Guide .................... 6-8 Screen Viewing Angle Adjustment ......... 9 Connections .............................................
DISC FORMATS The unit can playback. DVDs [8cm/12cm disc] Audio CDs [8cm/12cm disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc. The region number of this unit is 1.
ACCESSORIES Please check and identify the supplied accessories. Remote control (with battery) ............................................................................................. x 1 AC adaptor .......................................................................................................................... x 1 AC power cord ..................................................................................................................... x 1 Car power adaptor ............................
CONTROL REFERENCE GUIDE Remote Control 1) TV MODE button In stop mode, select whether to output the video signal. TV shows "AUTO" means output signal depends on DVD (either NTSC or PAL). TV shows "PAL" or "NTSC" which means output signal fixed to PAL or NTSC. 2) STOP button Stop playing a disc. 10) Cursor ( , , , ) buttons Use to highlight selections on a menu screen and make adjustments to certain settings. ENTER button Confirm selections on a menu screen.
CONTROL REFERENCE GUIDE Unit 1) Cursor ( , , , ) button Use to highlight selections on a menu screen and make adjustments to certain settings. ENTER button Confirm selections on a menu screen. 2) BRIGHTNESS button Adjust the relative lightness or darkness of the colour. 3) DIGITAL OUT jack 4) CONNECT TO MONITOR ports (output) 5) AV IN / DVD switch Turn off AV IN mode. Turn on DVD mode. 6) AUDIO & VIDEO IN / OUT jacks 7) Headphone jacks 8) VOLUME control Adjust the volume.
CONTROL REFERENCE GUIDE Monitor 1) 2) 3) 4) VOLUME control Adjust the volume. Remote sensor Receives the remote control unit signals. SCREEN switch Wide screen Normal screen COLOUR control Adjust for colour intensity. 5) BRIGHTNESS control Adjust the relative lightness or darkness of the colour.
SCREEN VIEWING ANGLE ADJUSTMENT The Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted as top -12°~ +12°. • Push screen frame to adjust viewing angle. Caution: • Do not force the screen frame over its maximum viewing angle settings as stated above. Attempting this will result in damaging the unit. CONNECTIONS Connecting the Monitor • Use supplied DIN cables to connect the monitor ports.
POWER SUPPLY A. Using the AC adaptor This AC adaptor operates on AC between 100V and 240V, But • In the U.S.A. and Canada, the AC power supply cord must be connected to a 120V AC power supply only. • When connecting to an AC supply outside of the U.S.A. and Canada, use plug adaptor to suit the AC outlet configuration.
POWER SUPPLY C. Using the rechargeable battery pack • Charge the rechargeable battery pack before using it for the first time. • The rechargeable battery pack is suitable when using the unit for portable use. ■ To recharge the battery Remove the rechargeable battery pack from the unit (if being used). RECHARGEABLE BATTERY PACK (7.4V 3600mAh Li-ion Battery) CHARGING indicator POWER indicator 1 To "BATTERY IN" jack 3 4 To wall outlet 2 BATTERY CHARGER 9V 3.
POWER SUPPLY ■ Disconnecting the Battery Pack. Push the button to disconnect the RECHARGEABLE BATTERY PACK RECHARGEABLE BATTERY PACK bottom of the unit Warnings: • When RECHARGEABLE BATTERY PACK battery is low, player will stop playing. • During the playback, if the battery is low, the BATTERY LOW indicator on the unit front panel will turn into red and blink. At this time, please recharge the battery. • Do not short-circuit the terminals.
CONNECTING THE OTHER EQUIPMENT Using this Unit with Other Equipment A. Connecting the Game Consoles / other Video Equipment • You can connect your Game Consoles or other Video Equipment to playback through the system. Right side of unit DVD AV IN To VIDEO & AUDIO IN /OUT Jack AUDIO/VIDEO CABLE (included) (Yellow) (Yellow) (Red) (Red) (White) (White) VIDEO OUT AUDIO OUT AUDIO/VIDEO CABLE Game Consoles / other Video Equipment Watching a Video Equipment 1.
CONNECTING THE OTHER EQUIPMENT C. Connecting to another source This unit can play Dolby Digital, but only in two channels. Analogue connection Right side of unit DVD AV IN (No need to connect the Yellow video plug) (Red) (Red) (White) (White) Amplifier of stereo system, etc. AUDIO IN AUDIO/VIDEO CABLE Digital connection COAXIAL DIGITAL AUDIO CABLE Audio equipment with digital audio input jack Rear of unit Listening to another audio equipment 1. Turn on the Unit. 2.
CONNECTING THE OTHER EQUIPMENT Using this Monitor with Other Equipment • You can playback DVD in Main Unit, also Game Consoles or other Video Equipment to playback in Monitor at the same time.
SOUND SYSTEM Dolby Digital (for DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to audio output when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier. This unit automatically recognises DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels. Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit.
CARRYING BAG INSTALLATION 1. Insert the unit into bag as shown. 4. Take another strap and hook up the upper headrest of the driver's seat as shown. 2. Insert the straps on carrying bag as shown. 5. Take loop elastic band to around the headrest of the driver's seat and unit as shown. 3. Take straps and hook up the neck headrest of the driver's seat as shown. 6. Adjust the straps tightly so that the unit is secured.
DVD CD Basic playback PLAYING A DISC This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc. Playing a Disc 1.
DVD CD PLAYING A DISC Basic playback Fast Forward/Fast Reverse 1. Press the SEARCH or SEARCH button of the remote unit when a disc is playing. • The disc begins fast scan at x2 speed. or SEARCH button is pressed, the speed of fast scan • Four speeds are available. Each time SEARCH changes in the following sequence: Note : You also can press and hold 2. Press the / (PREV/NEXT) buttons on unit repeatedly to select different fast scan speeds. PLAY button to resume playback at normal speed.
DVD PLAYING A DISC Basic playback Subtitle selection 1. While a DVD is playing, press the SUBTITLE / RETURN button to display the current language setting, as shown in the example below. 2. Press the SUBTITLE / RETURN button repeatedly to select the desired subtitle language. 1/3 Eng Notes : • If only one language is recorded, the language does not change. • About two seconds later, playback continues with the new subtitle you selected. • The number of languages recorded differs depending on the disc.
DVD Basic playback SPECIAL FUNCTIONS DISPLAY function Using DISPLAY, you can check the current settings of the following : ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISPLAY button of the remote unit to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Remaining time: Remaining time of the title which is currently playing.
DVD CD Basic playback Locating a specific title SPECIAL FUNCTIONS DVD If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. 1. In stop mode, press the GOTO button. 2. Press or button to highlight a specific field and press the corresponding number button(s) for the title you want. Time --:--:-- Title/Chapter ---/--- 3. Press the ENTER button to confirm. The unit will start playback about 3 seconds later.
CD / DVD PROGRAMMABLE MEMORY Programmable memory The two types of programmed playback provided by this unit are title/chapter programmed playback and track programmed playback. Title / Chapter programmed playback (DVD) 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in in -- -- . Use or button to move the highlight to chapter and enter the chapter numbers . 3. Use , , or button to move to the other field. 4. Repeat steps 2 to 3. 5.
DVD REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a title You can play the same title repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the screen. The current title is played repeatedly. Repeating a chapter You can play the same chapter repeatedly. 2.
DVD REPEAT PLAYBACK Repeating a specific section You can play a specific section repeatedly. 1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (( Rep A- ) is displayed) you want to play repeatedly. 2. Press the REPEAT A-B button again at the end of the section (( Rep A-B ) is displayed). 3. The Unit will immediately begin replaying your selection. To resume normal playback 4.
PLAYING PICTURE FILE DISC This unit can play Picture files recorded on CD-R and CD-RW discs. Playing a Picture file disc 1. Slide the OPEN switch to open the disc door. 2. Hold a Picture file disc by its sides and carefully fit onto the central support of compartment with the label side facing forward you until you hear a “click”. 3. Push the door to close. 4. The unit will take a short while to load the disc, automatically begin playback. The Picture files will be playback one by one.
CUSTOMIZING THE FUNCTION SETTINGS LANGUAGE setting 1. Press the SETUP button in stop mode. Language or button to one language, then press the ENTER 2. Use button. The screen will change to your selected language wordings immediately. 3. To exit the SETUP MENU and return to the normal screen, press the RETURN button. Video Audio Rating English Deutsch Français Español Italiano Svenska Português VIDEO setting 1. Press the SETUP button in stop mode. 2.
CUSTOMIZING THE FUNCTION SETTINGS AUDIO setting 1. Press the SETUP button in stop mode. 2. Use or button to select Audio, press the ENTER button repeatedly to select Digital Out type. 3. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. Language Digital Out Audio Video Rating Raw Raw : Use this setting when the unit is connected to an external Dolby Digital decoder. PCM : Use this setting when the unit is connected to an external surround decoder or stereo.
LANGUAGE CODE LIST FOR DISC LANGUAGE Code Language Name Code Language Name Code Language Name Code Language Name AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byerlorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French FY GA GB GL G
MAINTENANCE Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Check that the AC adaptor and AC power cord are connected. • Turn on the unit. The remote does not function. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the battery in the remote. DVD No sound or only a very low-level sound is heard. • Make sure that you've select DVD mode. • The system is in pause mode or in Slow-motion Play mode.