To achieve optimum performance of the MyHD Board, your PC requires a following minimum configuration. CPU : Pentium-II 333MHz or faster DRAM : 64 Megabytes or more System Bus : PCI OS : Windows 98SE, Windows ME , Windows 2000, Windows XP Other Software : DirectX Media 7.
Turn on your PC and install the MyHD Windows device driver from the installation CD, then install the MyHD application software. If DirectX 7.0 or higher version is not installed on your PC, install the latest version of DirectX before the installation of the MyHD device driver.
2. Remove the screw attached to the slot cover and remove the slot cover plate. 3. Before handling the MyHD card, ground yourself by touching the power supply box inside your computer 4. Position your card directly above the PCI slot and insert the card firmly into the slot. Care should be taken to press it evenly and snugly into its slot. 5. Use the enclosed jumper cable to connect the audio output of the MyHD card to the LINE IN, AUX or CD input of your PC sound card or motherboard.
8. Connect the remote control receiver to 9-pin serial port. Choose your display configuration A dual monitor configuration displays the standard Windows desktop on your PC monitor along with full-screen output from your MyHD card on a separate HDTV or VGA monitor. MyHD supports the following resolutions and horizontal frequencies on any monitor equipped with standard RGBHV or YPbPr inputs: - 1080i(1920x1080 interlaced, 33.7kHz) - 1024p(1024x768 progressive, 48.3kHz) - 720p(1280x720 progressive, 44.
A single monitor configuration displays the output of your MyHD card in either a resizable window or full-screen(giving you the ability to switch between the regular Windows desktop and MyHD's full-screen display), by using the enclosed VGA loop through cable with external A/V connector as shown(connecting the VGA output of your PC to the MyHD card, which then passes the combined video signals to your PC monitor). You can watch and capture video from any external source (including VCR, DVD, laserdisc, etc.
audio amplifier.
After your hardware installation has completed, turn on your PC and insert the installation CD. As Windows begins to boot, it will automatically open the "Add New Hardware Wizard" once it detects your addition of the MyHD card: Click on "Next >". Choose "Search for the best driver for your device.(Recommended)" and click on "Next >".
Choose "Specify a location" and then click on "Browse" to open the contents of the installation CD, navigate to the DRIVER folder, and choose the subdirectory for the version of Windows currently installed on your computer and click on "Next >". Note: you must choose the driver which matches your operating system as software designed for one version of Windows may not operate properly on another. Click on "Next >" if MyHD driver is searched. Copying Files...
After the installation has completed, click on "Finish". To confirm the installing MyHD in device manager, 1. Choose "Control Panel"/"System"/"Device Manager". 2. Click "Sound, video and game controllers" and then confirm the category of "MDP100 Video Capture".
Choose; 1. "MDP100 Video Capture Properties" 2. "General" Confirm the phrase of "This device is working properly" in device status. If the phrase is not shown, please install the MyHD device driver again. 1. Choose "Control Panel"/"System"/ "Disk drives" 2. Click "GENERIC IDE DISK...".
Choose; 1. "GENERIC IDE DISK...Properties" 2. "Settings" Confirm the "DMA" in options. If the "DMA" is not checked, please check the "DMA". If the monitor is connected to VGA card through VGA loop through cable with external A/V connector, confirm display properties. 1. Choose "Control Panel"/"Display".
2. Choose "Settings"/"Advanced" in display properties. 3. Choose "Monitor" and then uncheck "Automatically detect Plug & Play monitors". Warning Don't change resolution of screen area in "display properties"/"settings" while the MyHD program is executing. You can download new device driver in our homepage(www.DTVsolution.com). 1. Choose "Control Panel"/"System"/"Device Manager". 2. Click "Sound, video and game controllers"and then confirm the category of "MDP100 Video Capture".
Choose 1. "MDP100 Video Capture Properties" 2. "Driver" Click on "Update Driver...". As "Update Device Driver Wizard" is displayed, click on "Next >".
Choose "Display a list of all the drivers in a specific location, so you can select the driver you want." and click on "Next >". Choose "Show compatible hardware" and then click on "Have Disk..." to browse to the driver folder and click on "Next >". Choose "Show compatible devices" and then click on "Next >".
If location of driver is correct, click on "Next >". When the installation is complete, click on "Finish." After your hardware installation has completed, turn on your PC and insert the installation CD. As Windows begins to boot, it will automatically open the "Found New Hardware Wizard" once it detects your addition of the MyHD card: Choose "Install from a list or specific location (Advanced)" and click on "Next >".
Choose "Search for the best driver in these locations" and "Include this location in the search," then click on "Browse" to open the contents of the installation CD, navigate to the DRIVER folder, and choose the subdirectory for the version of Windows currently installed on your computer and click on "Next >". Note: you must choose the driver which matches your operating system as software designed for one version of Windows may not operate properly on another. Click on "Next >" to install the driver.
After the installation has completed, click on "Finish".
1. Choose "Control Panel"/"System/"Device Manager". 2. Click "Sound, video and game controllers" then confirm the category of "MDP100 Video Capture". Choose; 1. "MDP100 Video Capture Properties" 2. "General" Confirm the phrase of "This device is working properly" in device status. If the phrase is not shown, please install the MyHD device driver again.
To confirm the DMA settings. DMA is default "Transfer Mode" in Windows XP, 1. Choose "Control Panel"/"System" /"Device Manager". 2. Select "IDE ATA/ATAPI Controllers"/"Primary IDE Channel". 3. Click "Advanced Settings" then, confirm DMA is selected in "Transfer Mode".
With the installation CD still loaded in your PC, open the Windows Explorer, navigate to the APP folder on the CD, and double-click on SETUP.EXE to launch the software installation, following the on-screen prompts until installation is completed. Click on "Next >". Choose Destination Folder, click on "Next >".
Choose a program folder, click on "Next >". Installation process starts. Installation of the program is completed, then click on "Next >".
After the installation has completed, click on "Finish". To run the MyHD program immediately, check the check box and click on "Finish".
The below window will be appeared when you execute the MyHD program.
Press mouse right button on MyHD application program. Pop-up menu will appear like this. antenna1 (Ctrl+1) : Change input to antenna 1 antenna2 (Ctrl+2) : Change input to antenna2 Favorite (Shift+M) : Favorite channel mode on Composite(Ctrl+V) : Change input to Composite. S-Video(Shift+V) : Change input to S-Video. File (Ctrl+F) : File play mode on. When this menu is selected, Active Channel changes to Active File and Channel List changes to File List in the menu. DVD (Shift+D): DVD input mode.
shown. Select one of them, then channel will change what you select. Channel list (Ctrl+L) : Execute channel list configuration window. ( refer to channel settings) Active File : As shown on the right, file that is in the file list is shown. Select one of them, you will play the file you selected. File List (Ctrl+L) : Execute File list dialog box. (refer to file play setup) Move, Audio and Subtitle menu, as shown below, will be display when you open the "pop-up menu" if DVD input mode is selected.
changes to Show Control Panel. If you select Show Control Panel, then the control panel hidden by pressing Hide Control Panel will show up. HD mode(Ctrl+H) : Change to Full Screen Mode. Capture (Ctrl+C) : Start capturing stream, moving picture or image as referred to configure Add Reservation : Show Add Reservation dialogue . (refer to Capture settings ) Config panel (Ctrl+P) : Execute environment configure window.
MyIRC is the control program of MyHD through inputs of Remote Control Signal. Right State Do not use IR receiver state Error State MyIRC supports the functions of Remote Control and some functions of " Reservation Capture". MyIRC must be executed to run the automatic execution of MyHD and changeover to suspend mode automatically. The "Reservation Capture" can be executed even though the Remote Control Receiver is not connected.
When you select Reservation Capture Information on the pop-up menu, Reservation Capture Information is shown. Please set up the reservation capture function in "Config Panel/Capture Settings/Reservation Capture Option. ”(refer to Capture Settings) MyIRC supports the learning function for an external remote controller. It means you can use your remote controller of TV or VTR to execute the MyHD program and add "hot keys" on unused buttons of the MyHD's Remote Control Handset.
To set up the TV channels and to display the window of "Channel Setting" 1. Select Expanded main control panel/Channel List . 2. Click right mouse button/pop up menu/channel list. 1. Select Ant1(Antenna 1) or Ant2(Antenna 2). 2. Choose Air(terrestrial broadcast) or Cable. * Select Auto if you are not sure of which one to choose. If Auto is selected, the program will automatically detect either Air or Cable. 3. Click on Auto Scan.
2. Highlight a channel that you want to edit, then click Edit button. 3. The below window wil be shown. Type a name that you want to input, and click OK. If you want to display the channel name on the main control panel, go to "Config Panel/VGA Setup/Miscellaneous" to choose "Show Channel Name". ( refer to VGA Settings) . Favorite Channel Mode : This switches to Favorite Channel Mode, Pressing Up/Down button will only change channels in the "favorite channel box ".
-Channel number is classified in "virtual" and "physical" for both Memory Channel and Preferred channel in Channel List. - In case of analog channel, physical channel number become virtual channel number -Both kinds of channel can be set only for digital channels. - Virtual channel number and name can be correctly selected only when PSIP information is received. Otherwise, virtual channel number is set as physical channel and channel name is not settled.
Making selection relate to File Play. Play File List shows the list of files to be played. Clicking on "Add Item" button or "Delete Item" button allows you to add or delete files in the Play File List . Click on "Delete Files" button If you want to delete files from your hard disk as well as the Play File List. You can change the order of the Play File List by clicking on "Up" and "Down" button. ? Play list is to manage Play File List (*.mpl).
D:\TpStream\1102\documentary.tp files in the list D:\TpStream\1102\HDdrama.tp File not in the list, if file doesn't exist.
Resolution Select full screen(HDTV) mode of MyHD video output. * 1920 x 1080i is recommended if you are using a HDTV or a PC monitor because most of digital broadcast programs are sent on the air by 1920 x 1080i format. If you are watching an analog TV, please choose 720 x 480i format which is the current format of analog broadcasting programs. Aspect Ratio If you choose Auto, screen ratio will be selected automatically. When Auto is selected, you can choose screen format ,zoom or letter box.
5. LetterBox 16:9: Black strips are shown on left and right of the screen. 6. Zoom 4:3 : Expand to right and left to change aspect ratio. 7. Zoom 16:9 : Expand to top and bottom to change aspect ratio. Display Type Choose a video output signal of MyHD form either RGB or YPbPr; RGB for a PC monitor and YPbPr for component output to an HDTV(need a cable for connecting DSUB -15 to RCA). Video Controls : - Display Effect: Setting Brightness, Contrast and Saturation of MyHD video output.
Setting the display options of an overlay window in VGA setup. Setting overlay window mode Fixed Aspect Ratio Enlargement and reduction of the overlay window screen works maintaining certain ratio which is selected in Window aspect ratio VOP 30 fields/sec 30 fields of images in a second. Basic mode of an overlay window VOP 60 fields/sec 60 fields of images in a second. This mode will display more smooth motions than 30 fields/sec and it requires higher specification of PC.
VOP 60 frames/sec 60 frames of images in a second. The best quality of video will be displayed by this mode and higher specification of PC is required. (It might not be supported by performances and specifications of graphic card.) Keep Video On Top The overlay window is always displayed over other windows. Show Overlay Window To Show video on the overlay window. Canceling overlay window will make overlay window disappear. However, tray icon will appear.
pannel of HyHD. If none of this exist, it won't work (Apllicable to one monitor usage only) Using TitanTV Epg Set TitanTV Epg as basic setting, If not selected, it shows program guide of MyHD.(refer to Recording using TitanTV Epg). Caution - VGA screen is not displayed when "Using Separate Monitor" is selected with connecting the MyHD's A/V cable. In this case, a monitor cable should be directly connected to VGA Card. Then VGA screen is displayed.
Select how to capture the currently viewing image. Each Digital Broadcasting and Analog Broadcasting can select Capture Mode seperately. Transport Stream Capture Capturing a real time digital broadcasting program into HDD as Transport Stream. In detail options, a capturing file size can be selected 650MB, 2 GB or Custom. Still Image Capture Capturing a still frame image as format of bitmap(.bmp). Resolution depends on video resolution in A/V settings.
Transport Stream Capture Option - File Size : Select maximum size of capturing file. If file system is FAT32, the maximum selectable size of the file is 4000MB, but for NTFC, there is no limitation. If the file size exceeds the slected file size while capturing the file, a new file, " _number", will appear in addition to the original file name. (ex, Capture.tp, Capture_01.tp, Capture_02.tp ...
Directory Setting : Setting a directory for capturing transport stream and AVI file. Hiding Rec OSD Hiding Rec OSD from the screen while capturing. Overwrite Existing Files In case same name exist while capturing, it will overwrite existing file If you do not select this option and if same file name exist in the existing file list, prevent overwriting by adding '01' like number to end of the file name. ( ex : filename.tp, filename01.tp,...
Reservation Capture List: Make change, add, or delete. Maximum 50 can be reserved. Wake up from Suspend Decide whether to operate capture from suspend mode. If selected, it maintains suspend mode, and reservation capture mode won't operate. Transport Stream Capture in Background When capturing transport stream, MyHD activate as background mode. In this case, MyHD won't show up on overlay window, but it exists as tray icon and sound does not work.
Title : Select program title Active Channel By selecting channel, mamorized channel appears. Select channel that you wish to capture. If a wanted channel is not shown on the channel list, add the wanted channel to the memorized channel. If you wish to capture external input, choose external input from Major channel list. (Refer to Channel Selection ) Minor Channel For digital broadcasting, if there is many major and Minor Channels, select the wanted minor channel to appear on the screen.
Default When 'Default' is selected, depends on the selection, title, date, time, channel name, and channel number can be combined. Changing file name depends on its combination. If default is not selected, file name can be decided by user's input. File Select file to capture. When Default setting is selected, file will be chosen by the combination of names of a folder and a file. When default setting is aborted, folder and file may be selected by a user.
? GTo select a default DVD-ROM drive. ? GTo play a DVD title automatically when MyHD is executed. ? GSelect default tape device. If there are many tape devices, choose one as default Tape Device. Press Update to add newly connected tape device to the list. ? GWhen turning MyHD off, select to turn off tape device that was set as default.
? GFont: Select Font of OSD. Applicable to entire OSD. ? GStyle: Select Style of OSD. ? GSize: Select Size of OSD. ? GColor: Select color of OSD letter. ? GOutline: Select outline of OSD which is applicable to Display information only. ? GTransparency: Select Transparency of OSD. ? GSkin: Select skin of OSD. ? GPreview: Previewing the entire setup. ? GSelect whether to display OSD information on the screen. Select items you wish to display. If OSD Information is not selected, every OSD won't display.
Select channels Entering numbers by keyboard or pushing numbers on the MyHD's remote control handset. Changing channels To change channels : 1. Using channel buttons in the main control panel. 2. Using arrow keys in a keyboard. 3. Using channel buttons of the remote control handset. Changing Sub -channels If there are sub-channels in digital broadcasting, sub -channel can be selected by using sub-channel button in the main control panel or by the remote control hand set.
choose one and then press OK to actually play the file. If you wish to cancel press ESC button. ( refer to File Play Setting of Running MyHD in Full Screen Mode) FF/REW : When playing a file, use remote control or number keys on keyboard to control Multiple FF/FF. key board number keys 1(REW*1sec) 2(FF*1sec) 3(FF*2sec) 4(REW*2sec) 5(FF*4sec) 6(FF*sec) For example if FF is set as 10 sec, pressing #5 will move the file to 40sec after.
Capturing .Pressing Capture button of control panel or Rec button of remote control will save a file to directory that is assigned by capture directory. The file name will be saved as assigned by capture detail option. (refer to Capture Settings) When Add catured file to list option in File Play Setting is selected, captured file will be automatically added to file list.During capturing, capture time can be set by pressing Capture button of control panel or Rec button of remote control.
To view a large image, double click on the small image. ? Click Save button, then the below window will be displayed.
? If you want to save image in JPEG file, please change the format from "Save as type" box. Saving the still captue image directly Pressing Capture button of control panel or Rec button of remote control will save a file to directory that is assigned by capture directory. Press (Shift+S) to capture still Image For Installation of Tape device drvier refer to Tape record and playback Settings . For recording 1. Excute MyHD program,then click right button of the mouse. 2.
For replaying 1. Select "menu>>Tape(Ctrl+D)," then "Tape" will be displayed in the main control panel. 2. Use Play/FF/REW buttons for playback. -When video output does not work because programs or settings are changed during playing, click "stop" then "play" button. -If record/playback excutes on MyHD program, the power of VCR will be "ON" even though it is "OFF". -"Time Record" is available even though the power of VCR is "OFF".
Set "Add Schedule Recording" that you want to record , then click "OK." The setting will be automatically added in "Config Panel/Capture Setup/Capture Reservation.” To record a TV program while watching a program, just click "REC" button on the Remote Controller or click " Capture" button on the main control panel after finishing the "Capture Settings".
Add to Reservation List : Add to Reservation dialog appears. Choose a brocast program to capture and select Add to Reservation List button. Old broadcast program can not be add to reservation capture list. - Show Reservation List :Show the reservation list. - Press Update button to update program guide. Full Screen mode - Refer to Program Guide of Running MyHD in Full Screen Mode. ? MyHD supports DVD play function.
To play a DVD : 1. Insert a DVD title in your DVD drive. 2. Click the play button on the main control panel. Or 1. Drag a VOB or IFO file from file open window into the MyHD’s overlay window. To set Audio and Subtitle : 1. Use the “Pop -up menu/Audio/Subtitle” Or 1. Use the remote control handset “AUDIO ”button for the Audio and "CAPTION" button for the Subtitle. ? You can eject the DVD title from the drive using by the "eject" button on the main control panel.