User's Manual

ManualsBrandsMACmike ManualsElectronics2.4G wireless audio transceiver

2021-August

MACmike WM201 Wireless Microphone

System

User Manual

WM201 is a wireless microphone system with one transmitter/multiple receiver.

It’s used for school teaching, live broadcast, vocal recording, camera, lecture,

audio guide and others applications.

The transmitter and receiver need to be paired to use. The transmitter can be

paired with multiple receivers, which is very convenient for live broadcast or

recording purposes. Transmitter sound signal can input recording equipment such as

mobile phone, camera and computer through different receivers at the same time.

Moreover, the receivers can connect earphone for monitor.

Summary of content (5 pages)

PAGE 1
MACmike WM201 Wireless Microphone System User Manual WM201 is a wireless microphone system with one transmitter/multiple receiver. It’s used for school teaching, live broadcast, vocal recording, camera, lecture, audio guide and others applications. The transmitter and receiver need to be paired to use. The transmitter can be paired with multiple receivers, which is very convenient for live broadcast or recording purposes.
PAGE 2
Feature 1. 2.4G ISM band 2. Audio Latency: ≦8ms 3. Use on one transmitter/one receiver or one transmitter/ multiple receivers. 4. Built-In Microphone 5. A 3.5mm Audio In/ Audio Out phone-jack. The transmitter can be connected to audio source device such as condenser mic, mobile phones, computers and so on. The receiver can be connected to earphones, mobile phones, cameras, computers and so on. 6. Rechargeable Li-polymer battery. Compliance with IEC/UL/UN38.3 regulations. 7. Charging by USB Type-C. DC-5V. 8.
PAGE 3
Display 1. 2. 3. 4. The LCD displays system information. Symbol A means it is a transmitter. Symbol B means it is a receiver. Both symbol A and B means it is a receiver and this receiver is getting data from transmitter. 5. The receiver displays UX to indicate the volume status. (U0 is minimum volume, U9 is maximum volume) 6. Display 00~29 means channel. 7. Transmitter displays ，means the up/down key locked. 8.
PAGE 4
Advanced 1. The transmitter in power off status, pressed and hold the up/down key then turn on to enter the advanced setting mode a. Display software version 2 seconds. b. PX means radiation power. (P7 is maximum, P0 is minimum. Suggestion P4) c. 00~29 means channels. d. Press power key to save settings or auto-save after 10 seconds. e. After save settings, display OF and system off. 2. The receiver in power off status, pressed and hold the up/down key then turn on to enter the advanced setting mode a.
PAGE 5
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.