Other Content

www.mackie.com
16220 Wood-Red Rd NE •Woodinville, WA•98072•USA
Phone: [phone] • Toll-free: 800.898.3211
Fax: [phone] Email: [e-mail]
Frequently Asked Questions
profxv2.mackie.com
Page 1
The ProFXv2 Series can send 2 tracks out via USB. What feeds this output is the Main Mix. So whatever
is coming out of your main mix, is what will go out via USB.
Will I get separate tracks going into my computer via USB?
The ProFX Series mixers require no drivers to work properly with a Mac or Windows PC. All you need
to do is set it as your input and output device on your computer. On a Mac, you need to do this in the
Audio MIDI Setup app. In Windows, you do this in Control Panel>Sound.
Do I need to install anything to use my mixer with my computer?
Make sure that whatever channel(s) you want to hear out of the Mon Send 1 have their respective Mon
1 knob turned up (located within the channel strip) as well as the Mon 1 knob in the AUX MASTER sec-
tion (16/22) or the Mon Fader (8/12).
I’m not getting anything out of the Mon Send!
The Graphic EQ gives you the ability to add a master EQ to either your Main Outs or the Mon Send
1.This is a great tool to have that lets you compensate for certain frequencies that are enhanced or
attenuated in a particular venue. For example, if you notice that no matter what you send out of your
main outs/Mon 1, it always has a bit too much high end, then you can adjust this by cutting some of
the higher frequencies on the graphic EQ to give you more of a natural frequency response.
What is the Stereo Graphic EQ used for?
FAQFAQ