DRM212 • DRM215 • DRM315 Professional Powered Loudspeaker Series OWNER’S MANUAL
DRM Professional Powered Loudspeaker Series Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Minimum distance (5 cm) around the apparatus for sufficient ventilation.
Features Important Safety Instructions............................................ 2 Contents / Features............................................................. 3 Introduction / Getting Started............................................ 4 Hookup Diagrams................................................................ 5 DRM Loudspeakers: Rear Panel Features........................10 1. Power Connection....................................................10 2. Power Switch...............................
DRM Professional Powered Loudspeaker Series Introduction DRM Series Professional Powered Loudspeakers deliver class-leading power via ultra-efficient Class-D amplifiers with next-gen protection and Power Factor Correction technology for peak performance when you need it. Advanced Impulse™ DSP provides acoustic correction and time-alignment via precision tuned FIR filters for crystal clear, punchy sound typically experienced only with massive touring systems.
Owner’s Manual Hookup Diagrams SPEAKER CONTROL SPEAKER VOICING LIVE SHOW SPEAKER CONTROL LIVE CLUB SPEECH MON PUSH FOR SETTINGS GAIN LINE U GAIN MIC OFF +50dB INPUT LINE U GAIN MIC OFF +50dB INPUT OFF MAX INPUT PUSH FOR SETTINGS DIRECT OUT DIRECT OUT MIX OUT SPEAKER CONTROL SPEAKER VOICING MONITOR POSITION OFF +50dB LINE U MON MIC CLUB U SPEECH LINE GAIN LIVE PUSH FOR SETTINGS GAIN GAIN MIC OFF +50dB OFF MAX INPUT INPUT INPUT DIRECT OUT DIRECT OUT MIX OUT
SPEAKER CONTROL SPEAKER VOICING LIVE SHOW SPEAKER CONTROL SPEAKER CONTROL CLUB LIVE PUSH FOR SETTINGS GAIN U MIC OFF LINE +50dB U MIC OFF INPUT GAIN +50dB OFF MAX INPUT INPUT PUSH FOR SETTINGS GAIN MON LINE GAIN SPEECH DRM Professional Powered Loudspeaker Series Hookup Diagrams continued...
SPEAKER CONTROL SPEAKER VOICING CLUB GAIN MIC OFF +50dB LINE U GAIN MIC OFF +50dB OFF MAX INPUT INPUT INPUT DIRECT OUT DIRECT OUT MIX OUT MON U CLUB GAIN LINE SPEECH PUSH FOR SETTINGS LIVE SPEAKER CONTROL SPEAKER CONTROL PUSH FOR SETTINGS GAIN LINE MIC OFF PUSH FOR SETTINGS GAIN U LINE +50dB U GAIN MIC OFF +50dB OFF MAX INPUT INPUT INPUT DIRECT OUT DIRECT OUT MIX OUT SPEAKER CONTROL SUBWOOFER HPF DRM SUB OFF DRM SUB VAR Owner’s Manual Hookup Diagrams continu
DRM Professional Powered Loudspeaker Series Hookup Diagrams continued...
Owner’s Manual Hookup Diagrams continued...
DRM Professional Powered Loudspeaker Series DRM Loudspeakers: Rear Panel Features 1. Power Connection SPEAKER CONTROL This is a standard 3-prong IEC power connector. Connect the detachable power cord (included in the packaging with the loudspeaker) to the power receptacle, and plug the other end of the power cord into an AC outlet. 9 PUSH FOR SETTINGS Make sure that the AC power is matched to the AC power indicated on the rear panel (below the IEC receptacle).
To connect unbalanced lines to these inputs, use a 1/4" mono (TS) phone plug, wired as follows: 1/4" TS Unbalanced Mono Wiring: Sleeve = Shield Tip = Hot (+) SLEEVE SLEEVE 6. 1/8" Input [Ch. 3/4] This input may accept a stereo 1/8" line-level signal from a phone, tablet, MP3 player, or other signal source. NEVER connect the output of an amplifier directly to this input jack. This could damage the input circuitry. TIP Owner’s Manual DRM Loudspeakers: Rear Panel Features continued...
DRM Professional Powered Loudspeaker Series DRM Control Dashboard™ Main The following list provides the high level navigation items, in order, on the user interface and their subsequent user controlled parameters. The default screen is the main view, as seen below: Main – This displays the I/O metering, voicing mode, subwoofer HPF selection, EQ and delay settings and more. The only thing that may be changed here is the main output level.
This plug-and-play mode is perfect for larger venue applications where speech is the primary audio source in need of clear and precise intelligibility. • Monitor – This mode features a low frequency roll-off and a reduction around 2 kHz to ensure maximum gain before feedback in monitor applications.
DRM Professional Powered Loudspeaker Series Rotate the speaker control knob until the sub HPF you desire is illuminated, then push to select it. If var is selected (as seen below), the frequency is illuminated and may be changed by rotating the speaker control knob clockwise (raise the frequency) and counter-clockwise (lower the frequency). SUBWOOFER HPF VAR OFF DRM SUB VAR The DRM212, DRM215 and DRM315 all have 3-band EQ with shelving hi, peaking mid and shelving low.
• Low: ±0 dB (unity) @ 100 Hz • Mid: ±0 dB (unity) @ 1.00 kHz • High: ±0 dB (unity) @ 10.0 kHz EQ FLAT LoShelf MidPar HiShelf +7 -6 +8 133 1.27k 15.4k Like the previous sub-menus, the EQ also has a left-facing arrow. Illuminating and selecting this simply returns you to the menu. Let’s talk about those meters now. That is what’s called a “Real-Time Analyzer” [RTA for short].
DRM Professional Powered Loudspeaker Series Configuration This is where to recall / store settings to memory, lock access to the settings, select Ch. 2 input setting and more. Store – Tap this to store the current settings to the corresponding memory snapshot. Please be aware that the new settings will replace the currently saved settings. MAIN MODE SUB EQ DELAY CONFIG This is similar to what you will see after first entering the configuration screen.
Illuminating and selecting the left-facing arrow returns you to the previous screen. Front LED – Decide if you want the front LED on or off. When illuminated, push the speaker control knob to select between on or off. CONFIGURATION MEMORY 1 2 3 4 5 6 LOCK PIN 1 2 3 4 CH2 IN LO-Z HI-Z BACKLIGHT OFF DIM ON FRONT LED OFF ON RESET ABOUT Ch 2 in – The channel 2 input allows instruments to be connected directly into the 1/4" jack.
DRM Professional Powered Loudspeaker Series The screen displayed on the previous page and again below may be of particular interest. Yes, it’s true – you CAN do a factory reset and either choose to save your user presets or not! CONFIGURATION MEMORY 1 2 3 4 5 6 RESET LOCK PIN 1 2 3 4 CH2 IN Factory reset LO-Z HI-Z Keep presets? BACKLIGHT OFF DIM ON FRONT LED YES OFF ON NO RESET ABOUT Protection Circuitry DRM loudspeakers employ a built-in limiter for less distortion at peak levels.
Placement Be sure the DRM loudspeaker is plugged into an outlet that is able to supply the correct voltage specified for your model. It will continue to operate at lower voltages, but will not reach full power. Be sure the electrical service can supply enough amperage for all the components connected to it. WARNING: Installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death.
DRM Professional Powered Loudspeaker Series Room Acoustics DRM loudspeakers are designed to sound fantastic in nearly every application. But, room acoustics play a crucial role in the overall performance of a sound system. However, the wide high-frequency dispersion of the DRM loudspeakers helps to minimize the problems that typically arise.
WARNING: Installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death. Make sure that the loudspeaker is installed in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structures. WARNING: The cabinet is suitable for rigging via its fly points. NEVER attempt to suspend a DRM loudspeaker by its handle.
DRM Professional Powered Loudspeaker Series Appendix A: Service Information If you think your DRM loudspeaker has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the Support section of our website (www.mackie.com/support) where you will find lots of useful information such as FAQs and other documentation. You may find the answer to the problem without having to part with your loudspeaker.
DRM Loudspeakers Specifications Acoustic Performance Frequency Range (–10 dB): 45 Hz – 20 kHz [DRM212] 43 Hz – 20 kHz [DRM215] 35 Hz – 20 kHz [DRM315] 50 Hz – 20 kHz [DRM212] 47 Hz – 20 kHz [DRM215] 39 Hz – 20 kHz [DRM315] 90º [All, DRM315 rotatable] 60º [All, DRM315 rotatable] 134 dB [DRM212] 135 dB [DRM215] 137 dB [DRM315] 50˚ [DRM212 and DRM215] Frequency Range (–3 dB): Horizontal Coverage Angle: Vertical Coverage Angle: Maximum SPL Peak: Monitor Angle Transducers Low Frequency: Mid Freq
DRM Professional Powered Loudspeaker Series DRM Loudspeakers Specifications continued... 24 Physical Properties Options DRM212: Height: Width: Depth: Weight: 25.0 in / 635 mm 14.7 in / 373 mm 16.2 in / 411 mm 42.0 lb / 19.1 kg Height: Width: Depth: Weight: 28.3 in / 719 mm 18.1 in / 460 mm 17.0 in / 432 mm 57.0 lb / 25.9 kg Height: Width: Depth: Weight: 36.5 in / 927 mm 19.0 in / 483 mm 18.8 in / 478 mm 68.0 lb / 30.
Owner’s Manual DRM212 Loudspeaker Dimensions WEIGHT 42.0 lb 19.1 kg 25.0 in 635 mm 14.7 in 373 mm 16.2 in 411 mm 18.1 in 460 mm 17.0 in 432 mm DRM215 Loudspeaker Dimensions WEIGHT 57.0 lb 25.9 kg 28.3 in 719 mm DRM315 Loudspeaker Dimensions WEIGHT 68.0 lb 30.8 kg 36.5 in 927 mm 19.0 in 483 mm 18.
DRM Professional Powered Loudspeaker Series DIRECT OUT DIRECT OUT INPUT INPUT INPUT LINE LINE OFF MAX GAIN +50dB GAIN OFF U +50dB GAIN OFF U MIC MIC 4 User Selectable Voicings User Adjustable Parametric EQ External Subwoofer Crossover Alignment Delay Internal Crossover LF Equalization MF Equalization HF Equalization Limiter Limiter Limiter Thermal Monitoring Master Gain Amp Amp Amp MIX OUT LF MF [DRM315] HF DRM Professional Powered Loudspeaker Series DRM Loudspeak
Please keep your sales receipt in a safe place. This Limited Product Warranty (“Product Warranty”) is provided by LOUD Audio, LLC (“LOUD”) and is applicable to products purchased in the United States or Canada through a LOUD-authorized reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”). Owner’s Manual Limited Warranty For products purchased outside the U.S. or Canada, please visit www.mackie.
16220 Wood-Red Road NE Woodinville, WA 98072 • USA Phone: 425.487.4333 Toll-free: 800.898.3211 Fax: 425.487.4337 www.mackie.
