Installation Instructions

ManualsBrandsM5Stack Technology ManualsElectronicsTough

TOUGHQuickStart

USBDriver

Beforetheprogramisburned,userspleasedownloadthecorrespondingCP210Xdriverpackageaccordingtothe

operatingsystemyouareusing,clickthebuttonbelow.Afterdecompressingthecompressedpackage,selectthe

installationpackagecorrespondingtotheoperatingsystemvalueforinstallation.

DownloadCP2104driver

ForMacOS,makesureSystempreferences->Security&Privacy->Generalbeforeinstalling,andallowtheapps

tobeinstalledfromtheAppStoreandidentifieddevelopers

Windows10 MacOS

Linux

Summary of content (9 pages)

PAGE 1
TOUGH Quick Start USB Driver Before the program is burned, users please download the corresponding CP210X driver package according to the operating system you are using, click the button below. After decompressing the compressed package, select the installation package corresponding to the operating system value for installation.
PAGE 2
Arduino-IDE Click here to visit Arduino's official website,Select the installation package for your own operating system to download. M5Stack Boards Manager 1.
PAGE 3
2.Copy the following M5Stack Boards Manager url to Additional Boards Manager URLs: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json 3.Navigate to Tools -> Board: -> Boards Manager...
PAGE 4
.Search M5Stack in the pop-up window, find it and click Install 5.select Tools -> Board: -> M5Stack-Tough 6. Visit Github (https://github.
PAGE 5
Arduino library file path C:\Users\UserName\Documents\Arduino\libraries Bluetooth serial port function Open the Arduino IDE and open the example program File -> Examples -> BluetoothSerial > SerialToSerialBT . Connect the device to the computer and select the corresponding port to burn. After completion, the device will automatically run Bluetooth, and the device name is ESP32test .
PAGE 6
#include "BluetoothSerial.h" #if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED) #error Bluetooth is not enabled! Please run `make menuconfig` to and enable it #endif BluetoothSerial SerialBT; void setup() { Serial.begin(115200); SerialBT.begin("ESP32test"); //Bluetooth device name Serial.println("The device started, now you can pair it with bluetooth!"); } void loop() { if (Serial.available()) { SerialBT.write(Serial.read()); } if (SerialBT.available()) { Serial.write(SerialBT.
PAGE 7
Open the Arduino IDE and open the example program File -> Examples -> WiFi -> WiFiScan . Connect the device to the computer and select the corresponding port to burn. After completion, the device will automatically run the WiFi scan, and the current WiFi scan result can be obtained through the serial port monitor that comes with the Arduino. #include "WiFi.h" void setup() { Serial.begin(115200); // Set WiFi to station mode and disconnect from an AP if it was previously connected WiFi.mode(WIFI_STA); WiFi.
PAGE 8
// WiFi.scanNetworks will return the number of networks found int n = WiFi.scanNetworks(); Serial.println("scan done"); if (n == 0) { Serial.println("no networks found"); } else { Serial.print(n); Serial.println(" networks found"); for (int i = 0; i < n; ++i) { // Print SSID and RSSI for each network found Serial.print(i + 1); Serial.print(": "); Serial.print(WiFi.SSID(i)); Serial.print(" ("); Serial.print(WiFi.RSSI(i)); Serial.print(")"); Serial.println((WiFi.
PAGE 9
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.