FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Information to User Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules.
FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this MC7100S complies with the FCC guidelines and these international standards.
Note 5 l This manual is subject to copyright protection along with all relevant rights. l No part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of M3 Mobile Co., Ltd. l The content of the manual is provided “as-is” and be subject to change at any time without notice. l M3 Mobile Co., Ltd.
Copyright and Agreement 6 l This user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing technical feature. l If an application program provided by other supplier using by M3 SKY, refer to the supplier for a program manual. l The application program providers have the responsibility of indicating their contact number for customer service on M3 SKY terminal, item box, or program.
Caution when using M3 SKY (1) l User Caution – – – – – – – l Carrying and Storage Caution – – – 7 When the unit is lost or stolen, notify to network provider immediately. Do not rent the unit to third person without authorized permission. Do not use the unit while driving. For technical help, contact designated service centers. Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications.
Caution when using M3 SKY (2) l Do not reconstruct – – – l Illegal copy of mobile phone is prohibited – – – 8 Do not reconstruct M3 SKY for any purpose. It may cause fire in the unit, and wound or electric shock to users. Any defect caused by reconstructing units, can not get warranty. The person who reproduces mobile phone and uses this mobile phone is considered as criminals. The use of lost or stolen mobile phone is considered as a criminal act.
Size and Features Used frequency band WCDMA : 2100 / GSM 850 (TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHz WCDMA : 1900 / GSM 900 (TX) 880 ~ 915 MHz / (RX) 925 ~ 960 MHz WCDMA : 850 / GSM 1800 (TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHz GSM 1900 (TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHz WLAN : 802.11b/ 802.11g (2412~2462MHz) B T : 2402~2480MHz Band width 200 KHz (GSM) / 5MHz (3G) External appearance 78.6 x 163.5 x 24.
Contents STNETNOC 10 l Note 2 LED/Battery attaching/detaching 17 l Copyright and Agreement 3 Charging 18 l Caution when using M3 4 How to connect to PC 19 l Size and Features 6 1. M3 Introduction 9 Product Composition 10 Name and function of each part 12 Input Buttons 13 Soft/Hard Reset 15 How to use stylus pen 16 2. Basic Usage 20 Calibration 21 Main screen 23 Input screen 24 3.
Contents 4. How to use internet STNETNOC 11 33 6. Usage of Device 56 Via HSDPA 34 Camera 57 Via Wireless LAN 36 Bluetooth 61 Via Wireless WLAN 39 BTexplorer 66 Browsing the Web Site 42 IrDA 69 5.
1.
Product Composition (1) l At the first time of opening the product box, please check if it contains all the basic components, listed as following. noitcudortnI M3 SKY main terminal + 2 units of standard battery Ear Mic Phone + 2 units of Stylus pen 13 Cradle + USB cable Portable Adapter The product components may differ depending on the supplied products. CD + ActiveSync 4.
Product Composition (2) l How to use the manual – – noitcudortnI 14 – – This manual provides detailed information to make using the device easier and faster. The content related to phone or communication in this manual is only applicable when the device is equipped with HSDPA module for Voice and Data communication. The features described in this manual can not be used when it is not equipped in the device (WWAN, WLAN, Bluetooth, IrDA, Scanner, Camera, GPS).
Name and function of each part a Charge Ramp (Left) HSDPA Status Ramp (Center) Scanner Ramp (Right) Camera Button Pistol Grip Connecter Battery(built in) Scanner Button b Barcode Scanner Window a b Mini SD Extension Slot Stylus Pen Antenna Ear Mic Plug noitcudortnI c Volume Button c d Flash Camera Battery Lock e Battery SIM Card Slot Key Pad 15 Charge & USB/serial port Lower (Cradle) use d, e Infrared Communication Reset Switch Port (IrDA) LCD touch Screen
Input Button Volume Button Start button noitcudortnI Alphanumeric button Phone/Call button Left, right function button End button Camera Button Scanner Button Phone/Call button Power button Left, right function button Start / End button 방향 버튼 Function button Direction Button 16 Input keys Return button Backspace button Power button Direction Button Input keys Return button Backspace button
Input Button Component Description Press to toggle the device on/off. Power button Long press to menu (Backlight, Display, etc) Function Phone/Call function noitcudortnI 17 End function Input keys Left, right function button Alphanumeric Start button Backspace button press to accept the call or to execute the phone press to hang-up/reject the call.
Soft/Hard Reset ① ② ③ noitcudortnI Press ①+② and ③ power button l Soft Reset - A soft reset allows your device to get a fresh start, similar to rebooting a computer. - This restarts your device and adjusts memory allocation. - All records and entries are retained after a soft reset. - Unsaved data in open programs may in some cases be lost. l l Hard Reset - A hard reset removes power to your device.
How to use Stylus Pen l l Tap Tap the touch screen one time using a Stylus pen to select and execute items and files. noitcudortnI 19 l Drag It is used when you select the text. Please drag the desired part with stylus pen attached on the screen. Long Press Leave Stylus pen touching the screen for long and you can select the menu on the pop-up screen. You can also select functions available in the designated item using the popup menu.
LED / Battery attaching/detaching l LED Alarm – noitcudortnI LED Status LED for charging Red Green Blue Blinking Blue On Blue OFF Scanner LED 20 Informs Charging, Scanner Status.
Charging l l Connect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle.
How to connect to PC l l A cradle of M3 SKY supports charging and USB connection. Connecting step of cradle of M3 SKY is as following. – – – noitcudortnI – l l Connect charger to USB cradle. (24pin connector) Connect charger to power source. (to wall) Connect USB cable of USB cradle to USB port of desktop PC. Place M3 SKY onto docking cradle then execute Synchronization with Desktop PC.
2.
Calibration (1) l Calibrate the touch screen as shown below, at first time use or when cold (hard) booted. ① ② ③ egasU cisaB Tap the screen one time with a Stylus pen 24 Tap the (+) mark with the Stylus pen as it moves around. You can see the screen how to use the Stylus. If you don't need it, click the Skip. ① Press and hold the Stylus pen on the screen then select the Cut on the pop-up menu. ② Press and hold the Stylus pen like the arrow on screen, Tap the Paste on the pop-up menu.
Calibration (2) l Calibration continue.... egasU cisaB Set up the standard time zone date, and time. To set up a password, tap 'Next' otherwise tap 'Skip'. To set up a password set up a password type and password. 25 Choose outlook e-mail to set up an e-mail account and then tap the 'Next'. (POP3/IMAP/Outlook/E-mail) If you choose outlook E-mail or POP3/IMAP and then tap the 'Next', you should set up it Step by step. You can see the screen above after the Calibration.
Main Screen l Main screen – Button Main Screen is set below Start menu Start menu Info bar Info bar egasU cisaB Day/Time info Day/Time info Wireless info Wireless info User info User info Messages info Messages info Task info Task info function Select the program you want to use. View the power, modem, sound, input mode and connecting view. View the current date and time. View the Wireless power and state. View the personal information. View the Messages received. View the task information.
Input Screen (1) l To use Input - Process this program " Start > Programs > Word Mobile". l To use the Keyboard Input egasU cisaB Tap the arrow next to the keyboard icon and then select the keyboard on the menu screen as a picture above. 27 This is the Keyboard Input Screen. You can input the letter, number and characters when you click the each icon on the keyboard Input screen.
Input Screen (2) l Usage of Block Recognizer input. egasU cisaB Tap the arrow next to the keyboard icon and then select the Block Recognizer on the menu screen as a picture above 28 It is the screen of block recognizer input. In this input screen you can input letters in 'abc' and numbers in '123 ‘ each in the input box seen on the screen. In the input screen of block recognizer you can input special letters and characters by tapping the input box once.
Input Screen (3) l Usage of Letter Recognizer egasU cisaB Select the arrow next to the keyboard icon and then Select the 'Letter Recognizer' on the menu screen as the picture above. 29 This is the 'Letter Recognizer' screen. In the ‘Letter Recognizer' input screen, you can input the capital letters in 'ABC', the small letters in 'abc' and numbers in '123' each in the input box seen on the screen. Please choose ‘Options…’ on the input menu.
Input Screen (4) l Using transcriber input – Transcriber is a writing recognizer program. It provides you various writing input and input menu. egasU cisaB Select the arrow next to the keyboard icon and then select the Transcriber on the menu like the picture. 30 This is the Transcriber input screen. If you input letters, numbers and characters on the screen with the stylus pen, it would be written automatically on the place where the cursor is blinking.
Input Screen (5) l Input by using Keypad – You can input numbers and letters by using Keypad. Alphanumeric button egasU cisaB Convert ‘1 ,A, a’ using the input convert button on the input screen as the left picture. Then you can input capital letters, small letters, numbers and characters using keypads.
3.
ActiveSync Introduction l Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. – cnySevitcA – l l Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the most recent data. Not all the data is synchronized at same time.
ActiveSync install / connect l cnySevitcA l To install ActiveSync - Select the ActiveSync program in the CD provided, and then install it to the computer. – Once the installation is complete, connecting window will start. Connect the cradle with PC using USB cable, and then dock the device on the cradle. – When the device is recognized on the PC, Connection will be established after assigning the port for it automatically.
Synchronization of Data l If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. l “Sync Options” is a menu that you can select an item to synchronize. – cnySevitcA l 35 “Sync Mode” enables you to choose synchronization methods.
4.
Via HSDPA (1) l To connect to the Internet via Wireless WAN (1) tenretnI esu ot woH Tab ‘Start > Settings > Connections’ 37 Select ‘Add a new modem connection’ of ‘My ISP’ in the ‘Connections’. WWAN service is optional. It is not available in the device which does not have WWAN module installed. Put the name you want into the ‘Enter a name for the connection’. Then select the ‘cellular Line(GPRS)’ in the ‘Select a modem’.
Via HSDPA (2) l To connect to the Internet via Wireless WAN (2) tenretnI esu ot woH Input the Access point name suitable to the SIM Card / Operator company of Network then Tab the ‘Next’. 38 Tap the ‘Finish’ after input the User name and password according to the setting. (In some cases, it is required to set IP address at the advanced menu.) Select the ‘Manage existing connections’ on the Connections. Choose the ISP which you want to connect to as picture above.
Via Wireless LAN (1) l l l You can use the Wireless Network Via Wireless LAN. M3 SKY supports IEEE 802.11b and 802.11g. To connect the Wireless LAN (AP must be on and functioning) tenretnI esu ot woH On the Today Main screen, you select Wireless state bar or go to ‘Start > Settings > Connections>’ Wireless Manager. 39 Tap the WI-Fi on the ‘Wireless Manager' to turn WLAN on. Wireless LAN is optional. You can only use WLAN, when the WLAN module is built in to the device.
Via Wireless LAN (2) l To connect via Wi-Fi menu tenretnI esu ot woH On the settings screen, you select Wi-Fi Icon. You can also tap Start > Settings > Connections>Wi-Fi. 40 Configure the connect type then click the 'Next'. Configure the connect type then click the 'Next'. Input the authentification data then click the 'Next'. After configure Network authentification, tap the 'Finish'. You can see the wireless Networks available.
Via Wireless LAN (3) l Continue from the last page – Configure DHCP / Static IP tenretnI esu ot woH Tap an adapter to modify setting on the wireless LAN card and select the 'Edit'. 41 If you configure the IP as DHCP, Click the 'Use Server-assigned IP address. If you configure the IP as Static, Click the 'Use Specific IP address.
Via Wireless WLAN (1) l l l You can use the Wireless Network Via Wireless LAN. MM3 supports IEEE 802.11b and 802.11g. To connect the Wireless LAN (AP must be on and functioning) To connect directly on the Main Screen tenretnI esu ot woH On the Today Main screen, you select Wireless state bar or go to ‘Start > Settings > Connections>’ Wireless Manager. 42 Tap the WI-Fi on the ‘Wireless Manager' to turn WLAN on. Wireless LAN is optional.
Via Wireless WLAN (2) l To connect via Wi-Fi menu tenretnI esu ot woH On the settings screen, you select Wi-Fi Icon. You can also tap Start > Settings > Connections>Wi-Fi. 43 Configure the connect type then click the 'Next'. After configure Network authentification, tap the 'Finish'. You can see the wireless Networks available.
Via Wireless WLAN (3) l Continue from the last page – tenretnI esu ot woH 44 Configure DHCP / Static IP
Browsing the Web Site (1) l tenretnI esu ot woH Microsoft Internet Explorer - Via Wireless WAN , Wireless LAN and Active sync connection, you can browse the web. - You can download programs and files by accessing the Internet. To use the Internet Explorer Tap 'Start > Internet Explorer 45 Searching Address Window This is the Internet Explorer processing screen. Input the address you want on the address window in upper of the screen, then click the 'search'.
Browsing the Web Site (2) l Continue from the last page. tenretnI esu ot woH On the 'Menu > Favorites...' you can see the list of sites that you have saved and browse to it directly. The favorite page is like the picture above. On the Menu > History... You can see the list of sites that you have recently visited. The history page is like the picture above.
Browsing the Web Site (3) l To set up an e-mail account tenretnI esu ot woH Process the 'Start > Messaging'. Select the 'Menu > Tools > New Account...in the outlook E-mail box. 47 Set an E-mail provider for 'other‘ then tap 'Next.' Input the E-mail address on the Enter e-mail address , then tap ‘ Next '. When the Status is for completed, tap the 'Next'.
Browsing the Web Site (4) l Continue from last page tenretnI esu ot woH Set an E-mail provider for 'other‘ then tap 'Next'. 48 Select the Account Type and put the Name then tap 'Next'. Input the 'Incoming mail, Outgoing mail, Domain' then select 'Finish'. * For detailed setting menu, please click ‘Options’. After finishing the setting you can send and receive E-mail using the e-mail account.
Browsing the Web Site (5) l To send and receive an E-mail tenretnI esu ot woH < To receive an e-mail> Select the 'Message' on the 'Today' Select the 'Send / Receive' in the 'Menu' and check the received mail. 49 After process the 'Message' program , select the 'New' . You can send an e-mail when you select the 'Send' after writing a new e-mail.
5.
Init Screen l Phone Main Screen enohP eht esu ot woH GSM Operator Network Type HSDPA / Network Status Volume GSM Operator Call Status Input Number It shows Call Status. It shows Inputted Numbers. Call Status Key Pad It is used to dial the number and can be used as speed-dial. Contact It shows Phone Book Dialog. Input Number Key Pad Network Type It displays the availability of GPRS and EDGE / HSDPA connection. GSM/Network Status It indicates the signal strength.
Phone Control l Phone Program On/Off Phone Call Send/End enohP eht esu ot woH SEND END Select the SEND and END button like the picture above to start and finish the Phone program. You can turn on and off phone in Wireless Manager 52 l Tap the Phone button on the left bottom of the Today Screen and then you can process the Phone program. Also you can finish the program using the X button.
Phone Call and Receive l Phone Call l Phone Receive enohP eht esu ot woH To make a call: 1.Input number via program keypad or device keypad. 2.Make a call by pressing the ‘Talk’ button on the program, or pressing ‘SEND’ button on the device. 53 To hang up: Press the ‘END’ button on the program or on the device. When you get the Incoming Call, you can receive the phone call tapping the Answer button. If you don’t want to receive it just tap the Ignore button.
Phonebook l To use Phonebook Searching Contacts New Contact enohP eht esu ot woH Searching A name or Number. New SIM Contact Contacts Menu Contacts Menu 54 Contacts Option Input the new contact Input the contact to the SIM Card. Send Contact Transmit the information of Contact by BEAM or SMS. Copy/Delete Copy or delete the Contact Options Set the Options for Contact.
SMS send and receive (1) l How to send SMS enohP eht esu ot woH Select ‘message information’ menu on the main screen to send SMS. You can also send SMS by selecting ‘SMS send’ menu on Contacts or any other applications. 55 Change to the ‘Text Messages’ on the Message Program like the picture above and tap the ‘New’ on the bottom. Input the phone number and message. Tap the send to send SMS. You can see the pop-up screen when SMS is sent successfully.
SMS sent and receive (2) l How to receive SMS enohP eht esu ot woH When connected to the GSM network, new message arrival will be alerted a picture above. 56 By tapping one of the received messages, the content will be displayed on the separate window as picture above. Controlling received SMS can be done by using the menu on the ‘New Text Message' alert window or on the Text Messages program.
Controls while on the phone Functions while on the phone enohP eht esu ot woH Keypad Change to Mode available to input the Number on the screen. Mute Setting for receiver not to hear my voice while on the phone. Hold Hold for a moment while on the phone Contact End Move to Contact End phone call Featured functions while on the phone You can use various functions when you select the button on the bottom while talking on the phone.
Phone setting Phone setting enohP eht esu ot woH 58 Call Barring Block the calling to the specific number. Caller ID Turn on or off the Caller ID function. If it is enabled, your number will be shown to the receiver. Call Forwarding You can forward the incoming call to the other number. Call Waiting Voice Mail Text Messages Fixed Dialing Tap the ‘Start > Settings > Personal tap > Phone’ and in that menu you can set the Security and Sounds.
6.
To use the Camera (1) l Notice before taking pictures - The camera equipped with the M3 Sky is supported 2 mega pixels.
To use the camera (2) l To process the camera program - You can process the camera program when you tap the camera button or tap the camera icon on the 'picture or video'. eciveD fo egasU Select the 'Start > Programs > Pictures & Video. 61 You can process the camera program when you select the camera icon on the Picture & Video or select the camera icon in the menu. Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory , name and quality.
To use the camera (3) l Taking a Still photo eciveD fo egasU Execute the camera program first. Move around to focus the desired item. Finally press the camera button to take a picture. After executing the camera program , Preview mode will be changed to standby mode after certain amount of time. In order to start Preview Mode again, just tap the screen or press the camera button. 62 After taking a picture, the captured image will be displayed on the screen.
To use the camera (4) l Taking videos eciveD fo egasU If you want to take a video, select ‘Menu > Videos' after executing the camera program. 63 While taking a video, you can either stop (by tapping stop button) or pause. (by tapping pause button) If you want to watch the video taken, Select the 'Thumbnails' first to see the list of video files available. When you select the video you want, you can play the video recorded.
Bluetooth Communication (1) l Bluetooth On / Off eciveD fo egasU On the 'Today Main Screen' , select the Wireless State bar or Tap 'Start > Settings > Connections and select ‘Wireless Manager’. 64 To turn on/off Bluetooth, tap the The status of Bluetooth can be seen Bluetooth on the Wireless Manage on the wireless status bar on the main screen. Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.
Bluetooth Communication (2) l Setting the Bluetooth - On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settings eciveD fo egasU You can set the Bluetooth mode and establish connection when you tap the 'Bluetooth' icon on the Start > Settings > Connections. 65 In the Mode tab, you can turn on/off Bluetooth and make visible or invisible the device from outside. In the device tab, you can search and connect to other Bluetooth devices.
Bluetooth Communication (3) l To connect the Bluetooth - you can establish the connection by searching, matching pin code and selecting the service. eciveD fo egasU You can search the Bluetooth device available when you select the 'Add new device...' on the Device Tab. Select a device to connect with and tap 'Next' . Also you can select the 'Refresh' button if there is no device available. 66 Enter a Passcode to establish a secure connection.
Bluetooth Communication (4) l How to make the serial connection via Bluetooth – It is possible to assign the registered device to the COM port. eciveD fo egasU Once the device is registered, please tap ‘COM Ports’ tab and then select ‘New Outgoing Port’. 67 Select the device you wand to add and tap 'Next'. Select the port which is available, and then tab ‘Finish’. Once the connection is made, you can use the available service.
Bluetooth Communication (5) l Transferring files via Bluetooth connection. - It is possible to transfer files between Windows Mobile devices via Bluetooth. eciveD fo egasU In order to transfer files via Bluetooth connection, please go to 'Start > Settings > Connections > Beam‘ and then Check the 'Receive all incoming Beams ‘. 68 Select the file you want to transfer in the File Explorer. Press the file name long and tab ‘Beam File’. By tapping ‘Beam File’, the list of available Bluetooth devices shown.
BTExplorer(1) l Set up Bluetooth using BTExplorer -The user can set up mode, connecting BT device, COM setting by using BTExplorer. eciveD fo egasU If you click the ‘Bluetooth’ in the ‘Start> Settings> Connections’, you can set up and connect the Bluetooth mode. 69 Use the Device Info tab to configure the M3 Sky’s Bluetooth connection modes. Use the Services tab to add or delete Bluetooth services. To add a service: 1. Tap Add. The Add Local Service window displays. 2.
BTExplorer(2) l Set up Bluetooth using BTExplorer eciveD fo egasU Security settings allows you to set global security policies for Bluetooth. Note that these settings are only active on local Services that are set to Authenticate or Authenticate/ Encryption. You can set authentication on local Services under the Services tab. 70 Use the Discovery tab to set and modify discovered devices. Virtual COM Port defines which COM ports BTExplorer attempts to use for virtual COM ports.
BTExplorer(3) l Connect Bluetooth using BTExplorer – The user can access Bluetooth by searching, matching the password, and selecting the service. eciveD fo egasU Press ‘BTExplorer’ in the ‘Start>Programs’ 71 Press ‘New Connection’ in the menu where’s at the bottom of the screen It displays the service list you can set up. Set up your choice and press the ‘Next’. It displays the device list that you can connect. Click the device you want and press the ‘Next’.
IrDA Communication l To connect via IrDA eciveD fo egasU M3 Sky can communicate with desktop, notebook, pocket PC as well as other PDA that has OBEX protocol for the IrDA communication. To use infrared communication § § § § Locate Infrared communication port to be in series with an infrared (IrDA) port with other device. Press a quick link icon > Infrared communication menu. Infrared communication program is started and you can exchange data.
To use the GPS (1) l To set the GPS – – eciveD fo egasU Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS. You don’t have to set additional information when there is a single program which uses GPS data. When there are more than one program which use GPS data, you need to set the program port and hardware port required for each program. Select the GPS on the System Tab. Set the GPS Program Port which is not yet used.
To use the GPS (2) l To Connect the GPS - When there is a single GPS program, please use the GPS hardware port (COM2). When there are more than one GPS program, please use the pre-defined GPS program port. eciveD fo egasU Execute the GPS program you want. Set the COM Port and Baud Rate. Sample GPS map is not provided by M3Mobile. 74 It is available to use various application using GPS like searching the current location.
To use the Scanner (1) Scanner Manual l eciveD fo egasU 1. M3 ScanTest - It is a sample test program. It is only for testing the scanning feature of the device. It can not be used for business application. 2. ScanEmul - It is a program which can be used to output the scanned data on the application.
To use the Scanner (2) M3 Scan Test l This program is located under Flash Disk -> Scanner folder eciveD fo egasU The Scanned Data will be displayed here You can get the information like Firmware version, DLL version and Decoder version. It is to trigger the scan beam. You can also Use ‘S’ button on the right side to trigger it.
To use the Scanner (3) Scan Emul eciveD fo egasU When Scan Emul program operates, program icon is appeared in the tray bar. The user can access the various menus using this icon. 77 When you click the barcode icon, you will get This menu popped up.
To use the Scanner (4) Scan Emul You can set the Reading Option. eciveD fo egasU Sync: Scan Beam shoots until the Barcode is scanned or it’s timed out Async: Scan Beam Shoots while trigger button is pressed or until it’s timed out. Security Level: number of times to check scanned data. (ex, when it is set to 2, it will scan two times and compare the data whether it is same or not. Time Out: Scanner beam will be shoot for this time set.
To use the Scanner (4) Scan Emul eciveD fo egasU You can select the symbol (Symbology) to activate. 79 You can create the prefix and suffix that will be used in the beginning and ending of the bar code data. You can set the button that will be used as the scan button.
To use the Scanner (6) Scan Test l How to use scanner – Usage of 1D Scanner (MC-7100S, MC-7500S) eciveD fo egasU Correct way – Incorrect way Usage of 2D Scanner (MC-7700S) Correct way Incorrect way Scanner is optional. You can not use scan feature with no scanner enabled device. 2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan.
To use the RFID (1) l To Connect the RFID – eciveD fo egasU 81 Tap the ‘Start > File Explorer > Flash Disk > RFID’ and then you can run RFID.
To use the RFID (2) l To Connect the RFID – eciveD fo egasU – Let the upper back of the terminal touch the tag and then tap READ. RFID reader located in the upper-back of the terminal will recognize the tag. You can select Read Mode in Option. In Sync mode, the terminal should reach the tag to read the information. In Async mode, the terminal automatically search around and read the tag. In Continuous mode, the terminal continues to read the tag unless you command to stop.
To use the RFID (3) l Support Tag eciveD fo egasU 83 RF-ID is optional. Device without RF-ID can not use this feature. Frequency supported only 13.