User's Manual

02
03
04
Summary
Appearance design
Website: www.m2micro.com
M2Micro Co., Ltd.
Garage Door Control System
User Manual
Product functions
Remote switch Gate status Alarm push
Smart phone control QR code sharing Easy to install
Technical SPECs
Door controller
Product model: D3011A
Operating temperature: 13-158℉
Rated power: 10W
Operating voltage: 5V DC
Dimensions: 120L*120W*30H mm
Wireless connection:
Wi-Fi IEEE802.11b/g/n 2.4GHz
The Garage Door Control System is independently designed and manufactured by M2Micro Co.,
Ltd. This system is powered by our advanced AI solutions and Internet-of-Things (IoT) technique.
The garage door control system consists of a door controller and a door sensor. It adds remote
control to your original garage door switch, allows real-time monitoring of the garage door status,
and sents alarms to your mobile devices for security.
Door controller Door sensor
Operating instructions
1. App Download
Scan the QR code below to download the mobile App.
2. Account login
Connect your device to Internet through Wi-Fi. Run the App to log in to your M2Micro account.
For first time user, sign up a new account before login.
3. Set-up door controller
Plug the door controller into the power outlet ( 5V ).
For first time set-up, click the Add Manually button in your App, choose your Wi-Fi to connect,
then click OK.
In the pop-up dialog box, set the name of your garage door control system.Click OK to confirm
the set-up.
If it is not the first time to setup, , click " ... " on the upper right corner of the homepage in the
App, then select Add Controller to set-up.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this
device does not cause harmful interference 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed
and operated with minimum distance between 20cm the radiator your body: Use only the supplied
antenna.
Door sensor
Product model: D3011B
Operating temperature: 13-158℉
Battery type: AAA
Dimensions: 40.25L*95W*20.50H mm
Frequency: 2.4GHz
（For Residenal Use Only）
Product name
Product model
FCC ID
Door controller
D3011A
2ATDG-D3011A
Door sensor
D3011B
2ATDG-D3011B